Instrukcja obsługi Remington Reveal Facial Cleansing Brush FC1000

Remington Oczyszczanie twarzy Reveal Facial Cleansing Brush FC1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Remington Reveal Facial Cleansing Brush FC1000 (168 stron) w kategorii Oczyszczanie twarzy. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/168
ENGLISH
FC1000GP
2
Thank you for buying your new Remington® product. Please read these
instructions carefully and keep them safe. Remove all packaging before use.
F IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR INJURY
TO PERSONS:
1 This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been supervised/instructed and
understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be done by children unless they
are older than 8 and supervised. Keep the appliance and cable out of reach
of children under 8 years.
2 An appliance should never be left unattended when plugged into a power
outlet, except when charging.
3 Do not use this product if it is not working correctly, if it has been dropped
or damaged, or dropped in water.
4 Do not twist or kink the cable, and don’t wrap it around the appliance.
5 Do not use attachments other than those we supply.
6 Make sure the power plug and cord do not get wet.
7 Do not plug or unplug the appliance with wet hands.
8 Keep the charger away from water and heated surfaces
9 This appliance is not intended for commercial or salon use.
10 Use only as instructed.
11 This cleansing brush is designed for wet use and may be used in the
shower. DO NOT fully submerge in water.
12 After use the appliance should be cleaned to avoid the accumulation of
grease and other residues.
13 This appliance should be supplied with approved safety isolating adaptors
PA-0510E (for Europe) and PA-0510U (for United Kingdom) with the output
capacity of 5.0 dc; 1A (adaptor output).
ENGLISH
3
C GETTING ACQUAINTED WITH THE REVEAL FACIAL CLEANSING
BRUSH
The REVEAL Cleansing Brush has been designed and developed for cleansing
the face and neck.
The rotating (and vibrating) bristles gently provide a deep cleanse to remove
make-up and impurities leaving the skin feeling clean and fresh.
The REVEAL Cleansing Brush includes 3 Brush Heads for all your cleansing
needs:
NORMAL: For everyday deep cleansing suitable for all skin types.
EXTRA SENSITIVE: Extra-long, super-soft bristles, perfect for gentle everyday
cleansing of sensitive skin.
LUXE: For gentle and luxurious cleansing, ideal to give the skin a treat.
, TIP: When used on a high speed setting the LUXE brush head whips cleanser
into a thick, foamy lather for a more luxurious cleanse.
F WARNINGS AND SAFETY PRECAUTIONS
, Before you start using the REVEAL Cleansing Brush, be sure to read all the
warnings and safety information to check the product is suitable for you.
1 Avoid using on the delicate skin around the eyes.
2 DO NOT use the cleansing brush on the same area more than twice a day.
3 DO NOT use the cleansing brush on areas with open wounds, sunburnt skin,
chapped or irritated skin.
4 DO NOT use if you suffer from skin diseases or skin irritations such as severe/
active acne or skin infection.
5 DO NOT use if you are taking steroid-based medication.
6 DO NOT use the Cleansing Brush with cleansers containing harsh chemicals or
rough particles.
7 If you wish to share this product with other users, for hygiene reasons, ensure
you change the brush head. DO NOT share brush heads between multiple
users.
8 If you experience any pain or discomfort, stop using this product and contact
your doctor.
ENGLISH
GBDNLFEIDKSFINPSKCZ
HUN
PLRUTRROGRSIAE HRUA
5
F INSTRUCTIONS FOR CHARGING
1 Always ensure that your hands, cleansing brush and mains adapter are dry
before charging.
2 Before using for the first time, fully charge the Cleansing Brush. One full
charge will take 6 hours.
3 Ensure the appliance is switched off.
4 Insert the charging adapter into the charging stand Fig. 1.
5 Plug the adaptor into the wall socket.
6 Place the Cleansing Brush on the charging stand.
7 The charging indicator lights will glow in a rotating sequence whilst the
cleansing brush is charging.
8 When the Cleansing Brush is fully charged, all charging indicator lights will
remain illuminated for 5 minutes, then turn off.
9 One full charge will take 6 hours.
10 One full charge allows up to 30 minutes of cordless usage time (30 x 1 min
uses).
, NOTE: If the battery charge is low, all three LED lights will pulse on and off
whilst in use.
, QUICK CHARGE FUNCTION
The cleansing brush is also equipped with a quick charge function.
To utilise this function, charge the Cleansing Brush for 30 minutes.
This will provide approximately 4-6 uses.
F INSTRUCTIONS FOR USE
This product is suitable for wet use and may be used in the shower.
DO NOT submerge in water.
The charging stand and adaptor can not be used in a bath or shower.
The Cleansing Brush has 3 speed settings and comes with 3 brush heads.
Always choose the speed setting & brush head most comfortable for you.
ENGLISH
GBDNLFEIDKSFINPSKCZ
HUN
PLRUTRROGRSIAE HRUA
Fig. 1
6
, NOTE: If you suffer from sensitive skin, we recommend selecting speed setting
1 for the first few uses. If you do not experience any skin reactions then
speeds 2 & 3 may be used.
The Cleansing Brush also comes equipped with a one minute timer to help
ensure thorough cleansing of the whole face.
We recommend cleansing in 3 sections: T-Zone (1), Right side (2) and Left side
(3). Fig. 2.
The cleansing brush will gently pause every 20 seconds to indicate when to
move to the next zone
The cleansing brush will automatically switch off after 60 seconds to indicate
the end of the brushing time.
, NOTE: If you change speed settings during cleansing, the timer will set back
to zero and the timer will start again.
F HOW TO USE
1 Select the brush head to suit your skin type and
cleansing need. Gently push the bush head onto the
cleansing brush handle until you hear a click. Fig. 3.
2 Moisten the brush bristles by running under water.
, NOTE: DO NOT use the cleaning brush whilst
completely dry as this can cause skin irritation.
3 Dampen your skin with water and apply cleanser onto
your skin. Alternatively, apply your cleanser directly
onto the brush.
4 Place the cleansing brush directly onto your skin.
5 Switch on using the On/Off button.
6 Select the speed:
The cleansing brush will automatically start on speed
one
Press the button again for speed 2
1
Fig. 2
3
2
ENGLISH
Fig. 3
7
Press the button again twice for speed 3
, TIP: When changing brush heads, test each head on different speeds to
identify which is most comfortable for you.
7 Gently glide the brush over the skin in circular motions avoiding the
delicate eye area Fig. 4. When you feel a pause, move to the next area.
, NOTE: Try to avoid applying too much pressure with
the brush when directly on the skin. If this happens
the brush will automatically stop its cycle and switch
off. This is perfectly normal and helps to ensure a
comfortable treatment. The cleansing brush can be
restarted by pressing the On switch.
If you wish to end the cleansing cycle early press the
On/Off button as per below:
When using speed 1, press On/Off button 3 times
When using speed 2, press On/Off button twice
When using speed 3, press On/Off button once
When not in use, store the brush attachments with the
protective caps on Fig. 5.
Ensure the bristles are dry before attaching the
protective cap.
C REPLACING THE BRUSH HEADS
, Removing the brush head:
Hold the brush handle with one hand.
With the other hand, gently pull the brush head upwards until it comes off.
Fig. 6.
To replace the brush head, gently push the head back on until you hear a
click. Fig. 7.
Fig. 4
Fig. 5
ENGLISH
GBDNLFEIDKSFINPSKCZ
HUN
PLRUTRROGRSIAE HRUA
8
For best results, we recommend replacing all brush heads approximately
every 3 months.
Replacement Brush Heads are available:
Normal: SP-FC1
Sensitive: SP-FC2
Exfoliating: SP-FC3
Massage: SP-FC4
Luxe: SP-FC10
Extra Sensitive: SP-FC11
Contact your nearest Remington service centre for more information.
C CLEANING AND MAINTENANCE
To ensure long lasting performance of your cleansing brush, clean the brush
head and the handle regularly.
Ensure the cleansing brush is switched off before cleaning.
DO NOT attempt to clean any part of this product in a dishwasher.
DO NOT submerge the brush handle or charging stand in water.
Brush Head: Rinse the brush head and bristles after each use.
Brush Handle: To clean the handle, wipe with a damp cloth.
Charging stand: Wipe with a damp cloth.
, CAUTION: Ensure all parts are dry before connecting the charger into a wall
socket.
ENGLISH
Fig. 6 Fig. 7
9
BATTERY REMOVAL
The battery must be removed from the cleansing brush before it is scrapped.
The appliance must be disconnected from the supply mains when removing
the battery.
To remove the rechargeable battery:
Run the cleansing brush until the motor stops.
Remove the brush head.
Remove the two screws at the base of the handle.
Using a small screwdriver, pry the top cap off the handle.
Pry the battery from the internal assembly.
Dispose of the battery safely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste,
but recovered, reused or recycled.
ENGLISH
GBDNLFEIDKSFINPSKCZ
HUN
PLRUTRROGRSIAE HRUA


Specyfikacje produktu

Marka: Remington
Kategoria: Oczyszczanie twarzy
Model: Reveal Facial Cleansing Brush FC1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Remington Reveal Facial Cleansing Brush FC1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Oczyszczanie twarzy Remington

Instrukcje Oczyszczanie twarzy

Najnowsze instrukcje dla Oczyszczanie twarzy