Instrukcja obsługi RDL RU-MX5ML

RDL Ręczny blender RU-MX5ML

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RDL RU-MX5ML (2 stron) w kategorii Ręczny blender. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
RACK-UP® SERIES
Model RU-MX5ML
Audio Mic/Line Mixer
Mic or Line Level Audio Mixer
Five Channel Audio Mixer with Expansion Capability
Inputs and Outputs on Detachable Terminal Blocks
Switchable 24 V Phantom for Each Mic Input
Balanced Mic and Line Outputs
Expansion Bussing Capability
Output Level dual-LED VU Metering
Studio-Quality, Low-Noise Performance
The RU-MX5ML is part of the group of RDL RACK-UP products. The compact design permits high-density installations, with three products
mounted in a single rack unit. The RU-MX5ML may be used alone, or mounted using a wide variety of RACK-UP series options.
APPLICATION: The RU-MX5ML is the ideal choice in many applications where a combination of
balanced mic and/or balanced or unbalanced line-level signals needs to be mixed with the ability for
additional expansion. All connections are made using detachable terminal blocks on the rear panel.
Four of the RU-MX5ML inputs can accept either mic or line inputs. The fifth input is for line level
sources.
24 V phantom is individually switch selectable for each mic input. The output from one RU-MX5ML
may connect to the MIX input of another RU-MX5ML to expand mixing capabilities. The output
section provides both a balanced line (+4 dBu) and balanced microphone level (-45 dBu) output. Both
outputs may be used at the same time. Audio levels are adjustable on the front panel. The output is
equipped with a front-panel dual-LED VU meter that follows standard VU ballistics. A green LED
illuminates at 15 dB below +4 dBu. The intensity of the green LED progresses from minimum at -11
dBu to full intensity at +4 dBu. The adjacent red LED illuminates at +4 dBu.
Audio levels are adjustable on the front panel. A convenient label area is provided below each fader
knob. A label tab included with the mixer may be professionally labeled using a commercial lettering
machine, or the user may write on the tab. The tab locks into a pocket behind the front panel
laminate to produce a professionally labeled appearance.
The RU-MX5ML operates from ground-referenced 24 Vdc external power, connected through a
rear-panel detachable terminal block.
Wherever a mixer is needed to provide superior audio clarity, user adjustments, reliability,
compactness and unsurpassed versatility, the RU-MX5ML is the ideal choice. Use the RU-MX5ML
individually, or combine it with other RDL products as part of a complete audio/video system.
RDL
659 6th St.
Prescott, AZ., USA 86301
(928) 443-9391 FAX (928) 443-9392
www.rdlnet.com
RACK-UP® SERIES
Model RU-MX5ML
Audio Mic/Line Mixer
MIC/LINE IN
1 METER2 3 4 5
+4
LEVEL
LINE INMIC/LINE IN MIC/LINE IN MIC/LINE IN LINE OUT
N
L
I
I
M
C M
P
H
E
N
L
I
I
M
C M
P
H
E
N
L
I
I
M
C M
P
H
E
SET SWITCH TO "LINE" TO SELECT
THE LINE-LEVEL SOURCE CONNECTED
TO THE LINE INPUT TERMINALS
SET SWITCH TO "MIC" TO SELECT
THE DYNAMIC MICROPHONE CONNECTED
TO THE MIC INPUT TERMINALS
SET SWITCH TO "PHM" TO SELECT
THE CONDENSER MICROPHONE CONNECTED
TO THE MIC INPUT TERMINALS
(PROVIDES 24 V PHANTOM TO THE MIC)
RU-MX5ML
MADE IN U.S.A.
RDL
SIGNAL
SOURCE
UNBALANCED
FROM
SIGNAL
FROM
BALANCED
SOURCE
24 VDC
SOURCE
POWER
I
M
X
24
VDC
PWR
MICLINE
OUTPUTS
RU-MX5ML
MADE IN U.S.A.
RDL
INPUT 1INPUT 2INPUT 3INPUT 4
I
M
X
24
VDC
PWR
N
L
I
I
M
C M
P
H
E
LINE MIC MICLINE
EH
P
MC
M
I
I
L
N
MICLINE
EH
P
MC
M
I
I
L
N
MICLINE
EH
P
MC
M
I
I
L
N
LINE
INPUT 5
MICLINE
OUTPUTS
CONNECT TO EXPAND
MIXING TO ANOTHER
RU-MX5ML
INPUT WIRING
SIGNAL
EQUIPMENT
UNBALANCED
FEEDING
SIGNAL
FEEDING
BALANCED
EQUIPMENT
OUTPUT WIRING
OF THE RED LED
ADJUST DESIRED INPUT KNOB
FOR BRIGHTEST GREEN LED
WITH MINIMAL FLASHING
LABEL
HERE
LABEL
HERE
LABEL
HERE
LABEL
HERE
LABEL
HERE
1. WRITE OR AFFIX PRINTED LETTERING ON LABEL STRIP
3. SLIDE LABEL STRIP INTO MIXER
2. PEEL OFF ADHESIVE BACKING
CONNECT ONE OR
BOTH OUTPUTS
CONNECT A MIC OR LINE TO INPUTS 1 THROUGH 4
CONNECT A LINE-LEVEL SOURCE TO INPUT 5
TYPICAL PERFORMANCE
Inputs (6): 4 selectable mic or line level; 1 line level; 1 direct MIX; detachable terminal block
Input Impedance: Mic: >1.2 k balanced; Line: >10 k balanced
Maximum Input Level: Mic: -20 dBu; Line: +24 dBu
Phantom: Switch-selectable 24 V (IEC 61938: 2013)
Gain: Mic: Off to 65 dB; Line: Off to 15 dB
Outputs (2): Mic: -45 dBu balanced; Line: +4 dBu balanced; detachable terminal block
Output Impedance: 150 balanced
Frequency Response: Mic: 80 Hz to 40 kHz1 dB, < -6 dB at 20 Hz with integral high-pass filter)
Line: 10 Hz to 35 kHz (± 0.5 dB)
THD+N: Mic: < 0.03%; Line: <0.003%
Headroom: 20 dB (above +4 dBu output)
Noise: < -70 dB below +4 dBu output
(20 Hz to 20 kHz, all mic channels at 50 dB gain;
or one mic channel active at 60 dB gain)
< -90 dB below +4 dBu (20 Hz to 20 kHz, all channels off)
CMRR: Mic: > -65 dB (10 Hz to 10 kHz); Line: > -45 dB
Metering: Dual-LED VU Meter (calibrated to +4 dBu)
Power Requirement: GROUND-REFERENCED, 24 Vdc @ 75 mA
(120 mA max. including phantom); detachable terminal block
Dimensions: Height: 1.7 in. 4.3 cm; Width: 5.8 in. 15.0 cm; Depth: 4.8 in. 12.2 cm
Ambient Operating Environment: 0° C to 55° C
Power Requirements: 24 Vdc @ 65 mA, Ground-referenced
Installation/Operation
Declaration of Conformity available from rdlnet.com.
Sole EMC specifications provided on product package.
Specifications are subject to change without notice.
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
891-3320D


Specyfikacje produktu

Marka: RDL
Kategoria: Ręczny blender
Model: RU-MX5ML

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RDL RU-MX5ML, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ręczny blender RDL

RDL

RDL RU-MX5ML Instrukcja

22 Września 2024
RDL

RDL ST-MX2 Instrukcja

22 Września 2024
RDL

RDL ST-UMX3 Instrukcja

21 Września 2024
RDL

RDL ST-MX3 Instrukcja

21 Września 2024
RDL

RDL HD-RA35UA Instrukcja

20 Września 2024
RDL

RDL EZ-MXA20 Instrukcja

20 Września 2024
RDL

RDL HD-MA35U Instrukcja

20 Września 2024
RDL

RDL HD-MA35 Instrukcja

18 Września 2024
RDL

RDL HD-MA35UA Instrukcja

18 Września 2024
RDL

RDL HD-MA35A Instrukcja

18 Września 2024

Instrukcje Ręczny blender

Najnowsze instrukcje dla Ręczny blender