Instrukcja obsługi Radson 51043 - WIRELESS RF MAIN ZONE

Radson termostat 51043 - WIRELESS RF MAIN ZONE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Radson 51043 - WIRELESS RF MAIN ZONE (168 stron) w kategorii termostat. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/168
User Guide GB
WIRELESS “RF” MAIN ZONE PROGRAMMER 3 -41
Guide d’utilisation F
CENTRALE DE PROGRAMMATION RF 42 -82
Bedienungsanleitung D
ZENTRAL PROGRAMMER & THERMOSTAT 83 -122
Handleiding NL
Radio gestuurde centrale programmator 123 - 162
WIRELESS RF MAIN
ZONE PROGRAMMER
THERMOSTAT
2
3
Installation and Operation Manual
IMPORTANT!
Before starting work the installer should carefully read this Installation
& Operation Manual, and make sure all instructions contained therein
are understood and observed.
- The Main zone digital programmer should be mounted, operated
and maintained by specially trained personnel only. Personnel in the
course of training are only allowed to handle the product under the
supervision of an experienced fitter. Subject to observation of the
above terms, the manufacture shall assume the liability for the
equipment as provided by legal stipulations.
- All instructions in this Installation & Operation manual should be
observed when working with the controller. Any other application
shall not comply with the regulations. The manufacturer shall not be
liable in case of incompetent use of the control. Any modifications
and amendments are not allowed for safety reasons. The
maintenance may be performed by service shops approved by the
manufacturer only.
- The functionality of the controller depends on the model and
equipment. This installation leaflet is part of the product and has to
be obtained.
APPLICATION
- The Main zone digital programmer is developed to control and
manage all installations of water floor heating and cooling equipped
with our UFH-RF range thermostat. The temperature in each room is
managed the control of actuators mounting on the manifold.
- The controller is normally used in conjunction with a complete
connecting box “UFH-RF MASTER” with or without Heating &
Cooling function to connect all electrical & hydraulic components of
the installation like a circulation pump, actuators...
- The controllers have been designed for use in residential rooms,
office spaces and industrial facilities.
Verify that the installation complies with existing regulations before
operation to ensure proper use of the installation.
SAFETY INSTRUCTIONS
Before starting work disconnect power supply!
- All installation and wiring work related to the controller must be
carried out only when de-energized. The appliance should be
connected and commissioned by qualified personnel only. Make sure
to adhere to valid safety regulations.
- The connecting boxes are neither splash- nor drip-proof. Therefore,
they must be mounted at a dry place.
- Do not interchange the connections of the thermostats and the
230V connections under any circumstances! Interchanging these
connections may result in life endangering electrical hazards or the
destruction of the appliance and the connected sensors and other
appliances.

Specyfikacje produktu

Marka: Radson
Kategoria: termostat
Model: 51043 - WIRELESS RF MAIN ZONE

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Radson 51043 - WIRELESS RF MAIN ZONE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje termostat Radson

Instrukcje termostat

Najnowsze instrukcje dla termostat

Siemens

Siemens RDG100T Instrukcja

15 Października 2024
Junkers

Junkers TA 21E Instrukcja

14 Października 2024
Oreg

Oreg AT90E Instrukcja

9 Października 2024
Oreg

Oreg AT60E Instrukcja

9 Października 2024
Heatit

Heatit PRO Instrukcja

9 Października 2024
Heatit

Heatit MULTIREG6 Instrukcja

9 Października 2024
Avidsen

Avidsen HomeFlow W Instrukcja

9 Października 2024
ORNO

ORNO OR-SH-17701 Instrukcja

8 Października 2024
ORNO

ORNO OR-SH-17702 Instrukcja

8 Października 2024
STI

STI -9102 Instrukcja

8 Października 2024