Instrukcja obsługi QSC DPA-4K4Qn

QSC nieskategoryzowany DPA-4K4Qn

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC DPA-4K4Qn (24 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
TD-001585-01-B
*TD-001585-01*
DPA-Q & DPA-Q
Q-SYS Network Amplifiers
User Manual
DPA 2K4Q — 4 Channel, 2000 W Network Amplifier with Mic/Line Inputs
DPA 4K4Q — 4 Channel, 4000 W Network Amplifier with Mic/Line Inputs
DPA 8K4Q — 4 Channel, 8000 W Network Amplifier with Mic/Line Inputs
DPA 4K8Q — 8 Channel, 4000 W Network Amplifier with Mic/Line Inputs
DPA 8K8Q — 8 Channel, 8000 W Network Amplifier with Mic/Line Inputs
DPA 2K4Qn — 4 Channel, 2000 W Network Amplifier
DPA 4K4Qn — 4 Channel, 4000 W Network Amplifier
DPA 8K4Qn — 4 Channel, 8000 W Network Amplifier
DPA 4K8Qn — 8 Channel, 4000 W Network Amplifier
DPA 8K8Qn — 8 Channel, 8000 W Network Amplifier
®
2
TD-001585-01-B
EXPLANATION OF SYMBOLS
The term indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury “WARNING!”
or death.
The term indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it “CAUTION!”
may result in damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.
The term is used to indicate additional useful information."NOTE"
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"
voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and
operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the ambient operating temperature of the
rack environment may be greater than room ambient. Consideration should be given to ensure that the maximum operating
temperature range -10°C to 50°C (14°F to 122°F ) is not exceeded. Reduced Air Flow – Installation of the equipment in a
rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
9. To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protective earthing connection.
10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from theapparatus.
12. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
15. The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily operable after installation.
16. Adhere to all applicable, local codes.
17. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
18. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus. Clean only with a dry cloth.
19. Do not unplug the unit by pulling on the cord, use the plug.
20. Do not submerge the apparatus in water or liquids.
21. Keep ventilation opening free of dust or other matter.
3
TD-001585-01-B
Maintenance and Repair
WARNING! Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially
adapted maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons
and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only
by a QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury,
harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.
In the event of malfunction, contact QSC Customer Support for assistance.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCCRules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Environmental
Life cycle 10 years / Storage temperature -20 ° C to + 70 ° C / Relative humidity 5 - 85% RH
Service life - 10 years. Storage conditions: temperature from -20 ° C to + 70 ° C, humidity 5% - 85%.
If you wish to discard electronic equipment, please contact your dealer or supplier for further information.

Specyfikacje produktu

Marka: QSC
Kategoria: nieskategoryzowany
Model: DPA-4K4Qn

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QSC DPA-4K4Qn, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany QSC

QSC

QSC QIO-ML4i Instrukcja

13 Września 2024
QSC

QSC Cinema Core 110c Instrukcja

13 Września 2024
QSC

QSC DCA 1622 Instrukcja

13 Września 2024
QSC

QSC DPA-4K4Qn Instrukcja

13 Września 2024
QSC

QSC CX-Qn 8K4 Instrukcja

13 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024