Instrukcja obsługi Proel Artia A51T

Proel głośnik Artia A51T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Proel Artia A51T (8 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
A51T
Wall Mount Speaker
USER MANUAL’S
MANUALE D’USO
ENGLISH
ITALIANO
96MAN0140 REV. /20-12
DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT
This marking shown on the product or its literature, indicates
that it should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the
enviroment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take
this item for environmentally safe recycling. Business users should
contact their supplier and check the terms an d conditions of the
purchase contract. This product should not be mixed with other
commercial wastes for disposal.
GENERAL SAFETY INSTRUCTIONS
Proel S.p.A. declines any liability for damages to objects or persons
caused by lack of maintenance, improper use, installation not performed
with safety precautions and at the state of the art.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
EN54-24 CERTIFICATION
The product is in compliance with EN54 24:2008 standard.-
CE CONFORMITY
The product is in compliance with CE Directive LVD 20 35 / as 14 / CE
stated in EN 60065 standard.
TECHNICAL SPECIFICATION
System Type
Wall Mount Speaker
Drivers
1" tweeter
5" woofer
Power Rating @ 8Ω (nominal)
50 W
Rated Noise Power 100h
50 W
Power rating @ 100V
50 / 25 / 12.5 / 6.25 W
Power rating @ 70V
50 / 25 / 12.5 / 6.25 / 3.12 W
Impedance
8 Ω (nominal)
200 / 400 / 800 / 1.6K Ω @ 100V
100 / 200 / 400 / 800 / 1.6K Ω @ 70V
Connector
Ceramic Terminal block
Power selection
Rotary Switch
Measure Environment
Free Field
Frequency Response ( 10 dB)-
90 - 20k Hz
Sensitivity at 1W (1 kHz, 1m /
4m)
89.6 / 77.6 dB
Sensitivity at 1W (Pink Noise
6dB Crest Factor, 1m / 4m)
86.6 / 74.6 dB
Max SPL (Pink Noise 6dB
Crest Factor, 1m / 4m)
100.4 / 88.4 dB
Coverage Angle at 500 / 1k /
2k / 4k Hz ( 6dB)-
Hor.: 36 / 180° / 130° / 0° 85°
Vert: 360° / 145° / 85° / 35°
Cabinet
Black (RAL 9011)/White (RAL 9016)
Material
ABS / Aluminium
Environmental Type
B
Protection Degree
IP43C using PG11 glands
Operating Temperature
- -25 ÷ +55 °C ( 13 ÷ +131 °F)
Relative humidity
<95%
Dimensions (mm)
170 x 245 x 175 (W x H x D)
Mounting
on wall using supplied bracket
Weight
2.3 kg (5.07 lb)
Standard Compliance
EN54 24:2008-
Certification
0051-CPR- 1996
DESCRIPTION
A51T is a compact, two way, surface mount loudspeaker system - -
designed for constant voltage constant-or -impedance applications. It is
equipped with a mm (5”) woofer and a 1” dome tweeter, able to 127
provide an excellent speech intelligibility with wide dispersion, together
with a very good background music reproduction.
A51T features a transformer to operate on 100V and 70V constant
voltage systems. In a sealed compartment on the rear panel, together
with the rotary selector for power taps or impedance, it includes, in
compliance with EN 54 24:2008, a ceramic terminal block and a thermal -
fuse and it is, therefore, suitable for the use in voice alarm systems.
The ABS cabinet is available in black ( ) or white ( ) color A51TB A51TW
finishing, allowing the best décor matching in any environment.
The IP C environment protection allows the A51T speaker to be 43
installed both indoors and outdoors.
INSTALLATION INSTRUCTIONS
[1] Separate the bracket parts (B) and (D) removing the screw and the
washers (A). Then mark on the wall the fixing points for the (B)
part (you can refer to the wall drilling template (H)).
[2] Fix the bracket (B) to the wall choosing an appropriate fastening
system for the wall type (no fastening system is provided with the
produc – C). For maximum safety, consider that the fastening has t
to hold 5 to 10 times the weight of A51T. Note that the slot holes
can accept two 6mm screws or bolts (C).
[3] Assemble the bracket part (D) to the speaker using the (E) screws.
[4] Remove the rear cover (F) and insert the speaker line cables into
the black rubber slots. We suggest to use a proper speaker cable
with two insulated wires in a single jacket, with diameter between
6mm and 12mm.
[5] Connect the speaker line wires to the terminator block (H), taking
care to follow the +/ polarity.-
[6] Set the power to be delivered to the speaker using the rotary
switch (I).
WARNING! When the speaker is used in a 100V system, take
special care NOT to set the rotary switch in position 5 (N.C.).
Failure to observe this warning may cause damage to the
product.
[7] Close the rear cover (F) and fix the speaker to the wall, combining
the two bracket parts (B) and (D) with the proper screw and
washers (A).
[8] Aim the speaker to the listening area to be covered, then tight en
the screw (A).

Specyfikacje produktu

Marka: Proel
Kategoria: głośnik
Model: Artia A51T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Proel Artia A51T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Proel

Proel

Proel Artia A51T Instrukcja

29 Grudnia 2024
Proel

Proel CSB10 Instrukcja

29 Grudnia 2024
Proel

Proel V12 Free Instrukcja

25 Września 2024
Proel

Proel EIKON 5 Instrukcja

22 Września 2024
Proel

Proel HS30AL Instrukcja

17 Września 2024
Proel

Proel V15 Plus Instrukcja

17 Września 2024
Proel

Proel V8Plus Instrukcja

15 Września 2024
Proel

Proel V12 WAVE Instrukcja

15 Września 2024
Proel

Proel PR10PLB Instrukcja

15 Września 2024
Proel

Proel LT12P Instrukcja

15 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025