Instrukcja obsługi Pro-form PFMC99110
Pro-form
Monitor pracy serca
PFMC99110
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pro-form PFMC99110 (12 stron) w kategorii Monitor pracy serca. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
Heart Rate Monitor User’s Guide Model No.
PFMC99110
Congratulations for purchasing the new AccuRate™
heart rate monitor. To install and use the heart rate
monitor, read and follow all instructions in this
user’s guide. For detailed instructions about using
the heart rate monitor with your treadmill, refer to the
user’s manual included with your treadmill.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following conditions: (1)
this device may not cause harmful interference, and
(2) this device must accept any interference re-
ceived, including interference that may cause unde-
sired operation. Changes or modifications not ex-
pressly approved by ICON Health & Fitness, Inc.
could void the user’s authority to operate this device.
WARNING
If you have an implanted medical device such
as a pacemaker, check with your physician be-
fore using the heart rate monitor.
If you have heart problems, or if you are over 60
years of age and have been inactive, do not use
pulse-driven programs.
If you are taking medication regularly, consult
your physician to find whether the medication
will affect your exercise heart rate.
2
How to Install the Receiver
Before the heart rate monitor can be used, the included receiver must be installed. Pages 2 through 7 of this
user’s guide include eight sections that show how the receiver is to be installed in eight different styles of tread-
mills. Look at pages 2 through 7 and find the drawings that most closely resemble your treadmill. Then,
follow the instructions in that section to install the receiver. Note: Your treadmill may not look exactly like the
treadmills shown in the drawings. If you have questions, call toll-free 1-800-999-3756.
1. Make sure that the power cord is unplugged. Remove
the indicated Screws from the Console Back (A).
Important: The Screws may be different lengths. Keep
track of which Screws were removed from which holes.
2. Peel the paper off the pad on the bottom of the Receiver
(B). Turn the Receiver so the cylinder is on the side
shown, and press the Receiver into the bottom of the
Console Base (C) in the indicated location.
A
C
Screws
1
2C
B
Cylinder
3. Connect the Short Jumper Wire (D) to the wire on the
Receiver (B). Connect the other end of the Short Jumper
Wire to the PULSE jack on the back of the Console (C). If
there is a wire already plugged into the PULSE jack, un-
plug it. Note: The included Long Jumper Wire can be dis-
carded. The Wire Tie can be used to tie wires if needed.
Make sure that no wires are pinched. See step 1.
Reattach the Console (C) with the 1” Screws, 1 3/4”
Screws, and 2” Screws. Important: If the Screws are
not put back into the same holes that they were
removed from, the Console will be damaged.
3C
B
D
PULSE
Jack
3
1. Make sure that the power cord is unplugged. Remove
the indicated Screws (A) from the Console Back (B).
2. Peel the paper off the pad on the bottom of the Receiver
(C). Turn the Receiver so the cylinder is on the side
shown, and press the Receiver into the bottom of the
Console Back (B) in the indicated location.
Connect the Short Jumper Wire (D) to the wire on the
Receiver (C). Connect the other end of the Short Jumper
Wire to the PULSE jack on the back of the Console (E).
Note: The included Long Jumper Wire can be discarded.
The Wire Tie can be used to tie wires if needed.
Make sure that no wires are pinched. See step 1.
Reattach the Console Base (E) with the Screws (A).
B
E
A
1
2
PULSE
Jack
D
E
C
B
Cylinder
Specyfikacje produktu
| Marka: | Pro-form |
| Kategoria: | Monitor pracy serca |
| Model: | PFMC99110 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Pro-form PFMC99110, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Monitor pracy serca Pro-form
20 Września 2024
12 Września 2024
11 Września 2024
7 Września 2024
6 Września 2024
1 Września 2024
Instrukcje Monitor pracy serca
- Monitor pracy serca Beurer
- Monitor pracy serca Sanitas
- Monitor pracy serca Mio
- Monitor pracy serca Rossmax
- Monitor pracy serca Polar
- Monitor pracy serca Garmin
- Monitor pracy serca Sigma
- Monitor pracy serca Homedics
- Monitor pracy serca Medisana
- Monitor pracy serca IRiver
- Monitor pracy serca Omron
- Monitor pracy serca Pyle
- Monitor pracy serca Suunto
- Monitor pracy serca IGPSport
- Monitor pracy serca Oregon Scientific
- Monitor pracy serca Lezyne
- Monitor pracy serca Maxxus
- Monitor pracy serca Christopeit
- Monitor pracy serca Terraillon
- Monitor pracy serca TomTom
- Monitor pracy serca Bushnell
- Monitor pracy serca Wahoo Fitness
- Monitor pracy serca Magellan
- Monitor pracy serca Lanaform
- Monitor pracy serca Domyos
- Monitor pracy serca ProfiCare
- Monitor pracy serca VirtuFit
- Monitor pracy serca BBB
- Monitor pracy serca Bowflex
- Monitor pracy serca Runtastic
- Monitor pracy serca Flow Fitness
- Monitor pracy serca Echowell
- Monitor pracy serca Dexford
- Monitor pracy serca Ranex
- Monitor pracy serca CicloSport
- Monitor pracy serca Digi-tech
- Monitor pracy serca BBB Cycling
- Monitor pracy serca Osynce
- Monitor pracy serca Fusion Sport
Najnowsze instrukcje dla Monitor pracy serca
15 Stycznia 2025
11 Stycznia 2025
6 Października 2024
3 Października 2024
1 Października 2024
30 Września 2024
Oregon Scientific AH300E Talking Heart Rate Monitor Instrukcja
28 Września 2024
Oregon Scientific AH300 Talking Heart Rate Monitor Instrukcja
28 Września 2024
Oregon Scientific AH300A Talking Heart Rate Monitor Instrukcja
28 Września 2024
28 Września 2024