Instrukcja obsługi PolyJohn PSD1-1000

PolyJohn pralka PSD1-1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PolyJohn PSD1-1000 (2 stron) w kategorii pralka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
PSD1-1000 - Soap Dispenser
February 2016
Page 1 of 4
PSD1-1000 - Soap Dispenser
February 2016
Page 2 of 4
PSD1-1000
Soap Dispenser
POLYJOHN
USA
PolyJohn Enterprises Corp
2500 Gaspar Ave.
Whiting, IN 46394
Phone: 800-292-1305
Fax: 219-659-0625
www.polyjohn.com
info@polyjohn.com
POLYJOHN
WORLDWIDE
PolyJohn (UK) Ltd.
Equinox 1 Audby Lane
Wetherby, England LS22 7RD
Phone: 44 (0) 1937-583333
Fax: 44 (0) 1937-583322
sales@polyjohn.co.uk
POLYJOHN
CANADA
PolyJohn Canada
P.O. Box 2300
199 Forest Plain Rd.
Orillia, Ontario LV3 6S2
Phone: 800-465-9590
Fax: 705-325-8250
info@polyjohncanada.ca
We recommend reading through the entire information booklet prior to proceeding with
installation, service and maintenance. All references to left and right throughout the booklet
are as viewed from the front of the restroom.
~~Tools Required~~
Drill • 13/64 Drill Bit • Rivet Gun
Installation
Step 1. Remove the lid by turning
counterclockwise and lift up.
Step 2. Push the locking tab back and lift up
on the soap dispenser container.
Step 3. Holding the backing plate in the place
where you would like to mount the dispenser,
mark the placement for the three mounting
holes.
Step 4. Secure the backing plate in place using
the desired fasteners.
Step 5. Slide the soap container back in place,
making sure the locking tab is in place, and ll with
liquid soap. If the dispenser is tted with a foaming
pump, only foaming soap may be used.
Step 6. Replace the lid and secure in place by
turning clockwise.
Full Size Scale Fasteners
(3) PC-000102 Rivet
1) Push In Tab
2) Lift Up Container
Maintenance and Care
Use only mild cleaners with no abrasives
using a soft cloth to clean all surfaces.
Some silicone grease should be applied
occasionally to the o-ring at the top of the
soap container to keep the lid from sticking.
Mineral oil should NEVER be used.
If there is a chance for freezing, remove the
dispenser and drain the soap. Be sure to
remove the soap from the pump as well.
The PSD1-1000 PolyJohn soap dispenser is the
rst soap dispenser designed speci cally
for the portable restroom environment.
These features include:
A completely sealed soap container
to keep soap from spilling when
transporting the restroom
A lid that secures onto the soap
container after removing from the
restroom for spill-less storage
Easy to clean, smooth surfaces
Capable of regular liquid soap or
foaming soap by changing out the
pump
One hand operation
Clear container to see the level of soap
NOT FOR USE WITH ALCOHOL BASED
PRODUCTS
General Overview
Capacity: 30oz / 887ml
(3) PC-000105 Rivet
(3) PC-000106 Washer
PSD1-1000 - Soap Dispenser
February 2016
Page 3 of 4
PSD1-1000 - Soap Dispenser
February 2016
Page 4 of 4
For a source of cleaning, deodorizing and paper products contact:
COOPER’S OWN
2500 GASPAR AVE.
WHITING, IN 463942175
8002921305
www.polyjohn.com/products/supplies/cooper-s-own
MISSION STATEMENT
“PolyJohn is a family owned, state of the art, plastics manufacturing company
dedicated to providing its employees with a work environment committed to
excellence, and its customers with innovative products, services and technology
that meet or exceed their requirements.
THANK YOU FOR PURCHASING POLYJOHN PRODUCTS!
Look for us on the Web @ www.PolyJohn.com
We highly recommend membership in the Portable Sanitation Association International
(PSAI); the worldwide authority on portable sanitation services. The PSAI, “Portable
Sanitation Industry Certi cation Program manual contains a wealth of information on
standards and service procedures. For more information contact the PSAI:
PORTABLE SANITATION ASSOCIATION INTERNATIONAL PSAI
7800 METRO PARKWAY, SUITE 104
BLOOMINGTON, MINNESOTA 55425 USA
8008223020 / 6128548300 FAX 6128547560
www.psai.org
PSD1-0003 - Lid
PC-000243 - O-Ring
FP1-0021 - Valve
PSD1-0002 - Soap Body
PSD1-0001 - Mounting Plate
PSD1-0012 - Check Valve
PSD1-0020 - Return Spring
PSD1-0010 - Pump Cup
PSD1-0030 - Check Ball
PSD1-0021 - Check Spring
PSD1-0011 - Pump Shaft
PSD1-0005 - Pump Retainer
PSD1-0004 - Pump Button
Exploded View Parts Diagram


Specyfikacje produktu

Marka: PolyJohn
Kategoria: pralka
Model: PSD1-1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PolyJohn PSD1-1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje pralka PolyJohn

Instrukcje pralka

Najnowsze instrukcje dla pralka

Candy

Candy CS 15102D3-80 Instrukcja

15 Października 2024
GE

GE GSD3715FAA Instrukcja

15 Października 2024
Siemens

Siemens iQ700 WI14W540EU Instrukcja

15 Października 2024
LG

LG WTP22BK Instrukcja

15 Października 2024
Freggia

Freggia WTIE148 Instrukcja

15 Października 2024
Freggia

Freggia WISE126R Instrukcja

15 Października 2024
Freggia

Freggia WISE126B Instrukcja

15 Października 2024
Freggia

Freggia WISE126 Instrukcja

15 Października 2024
Freggia

Freggia WISA105 Instrukcja

15 Października 2024
Freggia

Freggia WISA106 Instrukcja

15 Października 2024