Instrukcja obsługi Polar Equine Wearlink

Polar Niesklasyfikowane Equine Wearlink

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Polar Equine Wearlink (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Polar Equine Wearlink
1. Placing the WearLink belt and
transmitter
Place the WearLink belt as indicated, with the
transmitter pocket on the left side of the horse.
By doing so, you ensure the electrodes of the
belt are in the right position.
Clip the transmitter to its contact points, as
indicated.
Then close the pocket by using the velcro
straps.
This pocket protects your transmitter from
shocks and scratches and prevent it from falling
off the belt.
The range of the WearLink transmitter is over
10m, therefore you can follow your horse’s
heart rate when working with a leash.
Using contact gel on the
electrodes of the WearLink belt
is highly recommended. It
ensures a better detection of
the horse’s heart rate.
The hypo-allergenic and
chloride-free electrode gels
ensure a better conductivity.
Non-thinning formula will not
break down or irritate after
lengthy contact.
Here is an example of
conductive gel recommended
by the biggest electrodes
manufacturers, to be used on
multifunctional electrodes.
The gel should be placed on the electrodes
located at the back of the WearLink transmitter.
Put a "dab" of gel on the top electrode...
... And on the bottom electrode (under the
transmitter pocket).
You can now saddle up, your WearLink belt and
transmitter are now ready for use!


Specyfikacje produktu

Marka: Polar
Kategoria: Niesklasyfikowane
Model: Equine Wearlink

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Polar Equine Wearlink, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Polar

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane