Instrukcja obsługi PlayBridgeDealer Dealer4 Maintenance

PlayBridgeDealer Różnorodny Dealer4 Maintenance

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PlayBridgeDealer Dealer4 Maintenance (36 stron) w kategorii Różnorodny. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/36
__________________________________________1_________________________________________
Dealer4 Maintenance, Adjusting and Cleaning Manual ver: 1.1
Version information:
Ver 1.0: First issued : 14/04/2008
- use word “Board” instead of “Card Box”
- combine with “Delaer4 Adjusting Manual 1V0”
Ver 1.1 issued: 30/01/2014
- added Front Board Pocket Adjustment
- added Adjustment of Gates
- updated instructions and materials to represent newest version of Dealer 4 machines
__________________________________________2_________________________________________
1 Dealer4 Maintenance....................................................................3
2 Dealer4 Cleaning ...........................................................................5
2.1 Cleaning tools......................................................................................... 5
2.2 Cleaning Feeder Rollers..........................................................................6
2.3 Cleaning Driving Rollers..........................................................................7
2.4 Cleaning the Camera and illumination LEDs............................................9
2.5 Cleaning photointerruptors.................................................................. 11
3 Dealer4 Adjustments................................................................... 15
3.1 Feeder Gap Adjustment ....................................................................... 15
3.1.1 Define proper gap size........................................................................................17
3.1.2 Measure existing gap size...................................................................................18
3.1.3 Feeder gap adjustment for machines with serial numbers less than 5027 ............20
3.1.4 Feeder gap adjustment for machines with serial numbers 5028 and above .........23
3.1.5 Adjusting the Feeder Gap without a Feeler Gauge ..............................................25
3.2 Card Width Adjustment........................................................................ 28
3.3 Board Pocket Adjustment..................................................................... 30
3.4 Front Board Pocket Adjustment ........................................................... 31
3.5 Inspection and Adjustment of Gates .................................................... 32
__________________________________________3_________________________________________
1 Dealer4 Maintenance
In this manual the following signs are used to highlight important information:
Critical information for safety and proper machine operation. Always read and follow.
Warnings
Additional important information
The Dealer4 is designed to operate without any special maintenance. Apart from the cleaning and
adjustment when required (see chapter 3) there is no other regular maintenance required. The Dealer4
does not require any lubrication, there are no belts, seals or any other elements which have to be
replaced on a regular basis by the user.
Despite that the Dealer4 is virtually maintenance free it is recommended that the machine be serviced
by an authorized Service Center at least every 3 years or every 40000 dealt boards. During these services
the machine will be disassembled, thoroughly cleaned, all parts will be checked and replaced if required.
Then the machine will be adjusted and tested. Serviced machines will provide correct, reliable operation
and decrease possibility of malfunction.
The only elements which are subject to wear during normal operation are the rubber rollers. There are
two types of rollers used in the machine
- 4 Pairs of Green polyurethane rollers used as a Drive Rollers. Some older machines may still have black
rubber Drive Rollers. These typically last 40000 deals.
For machines with a Serial Number less than 4218:
- 2 Black Rubber Feeder Rollers
For machines with a Serial Number 4218 and above:
- 1 Long Feeder Roller. These may be varying colors such as black, blue or grey.

Specyfikacje produktu

Marka: PlayBridgeDealer
Kategoria: Różnorodny
Model: Dealer4 Maintenance

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PlayBridgeDealer Dealer4 Maintenance, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Różnorodny PlayBridgeDealer

PlayBridgeDealer

PlayBridgeDealer Dealer4 Maintenance Instrukcja

28 Września 2024
PlayBridgeDealer

PlayBridgeDealer Board Number Reader Instrukcja

28 Września 2024
PlayBridgeDealer

PlayBridgeDealer 4 plus Instrukcja

28 Września 2024

Instrukcje Różnorodny

Najnowsze instrukcje dla Różnorodny

Walkera

Walkera Goggle 3 Instrukcja

15 Października 2024
Walkera

Walkera Goggle 4 Instrukcja

15 Października 2024
Somfy

Somfy Telis Lounge Instrukcja

5 Października 2024
Navman

Navman NavBus Instrukcja

5 Października 2024
Trelock

Trelock LS 320 Instrukcja

5 Października 2024
DJI

DJI Phantom 3 Standard Instrukcja

5 Października 2024
Bobike

Bobike Maxi City Instrukcja

5 Października 2024
Tanita

Tanita 1210N Instrukcja

5 Października 2024
Kerbl

Kerbl 81685 Cat flap Instrukcja

5 Października 2024
Tanita

Tanita HC-212F Breath Checker Instrukcja

5 Października 2024