Instrukcja obsługi Planet POE-161

Planet Karta sieciowa/adapter POE-161

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Planet POE-161 (4 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

IEEE 802.3at Gigabit

High Power over Ethernet Injector

POE-161

User’s Manual

Version 1.1

2. Product Features

POE-161:

Interface

2-Port RJ-45 interfaces

1-Port Data + Power output

1-Port Data input

1 DC 56V input power socket

PoE

Gigabit High Power over Ethernet Mid-Span PSE

IEEE 802.3at POE compliant

IEEE 802.3af splitter devices compatible

Support PoE Power up to 30 Watts for PoE port

Up to 1 IEEE 802.3at devices powered

Provides DC 56V power over RJ-45 Ethernet cable to

device with Ethernet port

Auto-detect of POE IEEE 802.3at equipment and

devices from being damaged by incorrect installation

Remote power feeding up to 100m

Hardware

Plastic case

LED indicators for Power LED and PoE In-use

4. Product Outlook

Figure 1: shows a front panel of 802.3at PoE Injector.

Figure1: POE-161 Outlook

LED Indicators

LED Color Function

PWR Green Lights to indicate that the POE-161

has power.

PoE In-use Green Lights to indicate the port is

providing 56V DC in-line power.

3. Product Specication

Product POE-161

Hardware Specication

Interface

“Data” Input Port 1 x RJ-45 STP

“PoE

(Data+Power)”

Output Port

1 x RJ-45 STP

DC 56V Input

power socket 1

LED Indicator System: Power x 1 (Green)

PoE Port: PoE in Use x 1 (Green)

Network Cable

10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to

100m (328ft)

100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up

to 100m (328ft)

1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up

to 100m (328ft)

EIA/TIA- 568 100-ohm STP (100m)

Data Rate 10/100/1000Mbps

Dimension (W x D x H) 95 x 70 x 25 mm

Weight 83g

Unit Input Voltage DC 56V, 0.53A

Power Requirement 100-240V AC, 50/60Hz

Power Consumption 30 Watts max.

1. Package Content

Thank you for purchasing PLANET IEEE 802.3at High Power

over Ethernet Injector, POE-161. Terms of “802.3at PoE

Injector” in following section of this User’s Manual means

the POE-161.

Upon open the box of the IEEE 802.3at High Power over

Ethernet Injector and carefully unpack it. The box should

contain the following items:

POE-161:

The IEEE 802.3at Gigabit High Power over Ethernet

Injector x 1

User’s Manual x 1

DC 56V Power Adapter x 1

Power Cord x 1

If any of these are missing or damaged, please contact your

dealer immediately, if possible, retain the carton including

the original packing material, and use them against to

repack the product in case there is a need to return it to us

for repair.

Standard Compliance

IEEE 802.3 10Base-T

IEEE 802.3u 100Base-TX

IEEE 802.3ab 1000Base-T

IEEE 802.3at Power over Ethernet

FCC Part 15 Class A, CE

PD (Powered Device) is a PoE-enabled terminal by PSE

and thus consumes energy, such as IP Phones, network

cameras and Wireless access points, etc

Note

PSE (Power Sourcing Equipment) is a

device (switch, or hub for instance) that will

provide power in a PoE setup. Maximum allowed

continuous output power per such device in

IEEE 802.3af is 15.4W, 30W in IEEE 802.3at.

Number of device can be

powered 1

Operating Temperature 0 ~ 50 Degree C

Storage Temperature -10 ~ 70 Degree C

Humidity 5 ~ 95% (Non-condensing)

Power over Ethernet

PoE Standard IEEE 802.3at High Power over Ethernet /

Mid-Span PSE

PoE Power Output DC 56V / 30 Watts

PoE Power Supply Type Mid-Span

Power Pin Assignment 4/5(+), 7/8(-)

Standards Conformance

Standards Compliance

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast Ethernet

IEEE 802.3ab 1000Base-T Gigabit

Ethernet

IEEE 802.3at Power over Ethernet

Regulation Compliance FCC Part 15 Class A, CE

5. Hardware Installation

This IEEE 802.3at Gigabit High Power over Ethernet Injector

provides three different running speeds – 10Mbps, 100Mbps

and 1000Mbps in the same device and automatically

distinguishes the speed of incoming connection. Please

refer to following sections for detail information about IEEE

802.3at Gigabit High Power over Ethernet Injector.

5-1 POE-161:

The following section describes the hardware features of

POE-161. Before connecting any network device to the

POE-161, read this chapter carefully.

Before Installation

Before your installation, it is recommended to check your

network environment. If there is any IEEE 802.3at devices

need higher power to power on and work normally, the

POE-161 can provide you a way to supply power for this

Ethernet device conveniently and easily. The POE-161

equips with an AC-DC adapter with DC 56V input and

injects this DC power into the pin of the twisted pair cable

(pair 4, 5 and pair 7, 8).

If there is very difcult to nd a power socket for AC-DC

Adapter of your non IEEE 802.3at networked device, the

POE-161 and POE-162S can provide you a way to supply

DC power for this Ethernet device conveniently and easily.

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

Note

The POE-161 and POE-162S can be installed

in pair. However, the use of third-party device

is allowed if the device complied with IEEE

802.3at Power over Ethernet.

POE-161, the Injector Installation

1. Connect the AC adapter to “DC 56V” of POE-161. The

power LED will be steady on.

2. Connect a standard network cable from Switch/worksta-

tion to port of POE-161.“Ethernet”

3. Connect the long cable that will be used to connect to

the remote device to the port “Ethernet + DC”.

4. Connect with IEEE 802.3at devices, due to the capability

of IEEE 802.3at Power over Ethernet, the POE-161 can

directly connect with any IEEE 802.3at end-nodes such

as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed

Dome, color touch- screen Voice over IP (VoIP) tele-

phones, multi- channel wireless LAN access points where

support IEEE 802.3af In-line Power over Ethernet port.

The screen in Figure 2 appears.

POE-161 and POE-162S, the IEEE 802.3at Injector

Splitter Installation

1. Connect the AC adapter to “DC 56V” of POE-161. The

power LED will be steady on.

2. Connect a standard network cable from “Ethernet+DC”

port of POE-161 to “PoE In” port of POE-162S. The POE

In-use LED of POE-161 / POE-162S will light on continu-

ance.

3. Connect a standard network cable from Switch/worksta-

tion to port of POE-161.“Ethernet”

4. Connect the UTP cable in the package from “Ethernet”

port of POE-162S to the RJ-45 port of remote device.

5. Adjust proper DC power output and connect DC plug

from of POE-162S to remote device.“DC OUT”

6. Power on the remote device and its power LED indicator

will remains on.

Switch

100 meters

PoE

PTZ Speed

Dome

POE-161

1000Base-T UTP

PoE

1000Base-T UTP with PoE

Power Line (AC)

Figure 2: Connection to IEEE 802.3at device

Once POE-161 detects the existence of an IEEE 802.3at

device, the POE In-use LED indicator will be steady on to

shows it is providing power.

Note

1. Since the POE-161 PoE port supports 56V

DC PoE power output, please check and

assure the Powered Device (PD) acceptable

DC power range is from 52 to 56V DC.

Otherwise, it will damage the Powered

Device (PD).

2. If the connected device is not fully complying

with IEEE 802.3at Power over Ethernet or in-

line power device, the LED indicator of POE-

161 will not be steady on.

Switch

POE-162S

POE-161

100 meters

PoE

DCDC

PTZ Camera

1000Base-T UTP

PoE

1000Base-T UTP with PoE

Power Line (DC)

Power 12V/24V

Figure 3: Connection architecture over POE-161/POE-162S

Note

1. According to IEEE 802.3at Power over

Ethernet, the POE-161 will not inject power

to the cable if not connecting to IEEE

802.3at devices.

2. Please ensure the output voltage is correct

before applying power to remote device.

Customer Support

Thank you for purchase PLANET products. You can browse

our online FAQ resource at the PLANET Web site rst to

check if it could solve you issue. If you need more support

information, please contact PLANET switch support team.

PLANET online FAQ :

http://www.planet.com.tw/en/support/faq.php?type=2

Switch support team mail address :

support_switch@planet.com.tw

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology

Corp. All other trademarks belong to their respective

owners.

EC Declaration of Conformity

For the following equipment:

*Type of Product : IEEE 802.3at High Power over Ethernet Injector (25 Watts)

*Model Number : POE-161

* Produced by:

Manufacturer‘s Name : Planet Technology Corp.

Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist.,

New Taipei City 231, Taiwan (R.O.C.).

is herewith confirmed to comply with the requirements set out in the Council Directive on the

Approximation of the Laws of the Member States relating to Electromagnetic Compatibility

Directive on (2004/108/EC).

For the evaluation regarding the EMC, the following standards were applied:

EN 55022 (CLASS A: 2006 + A1:2007)

EN 61000-3-2 (2006)

EN 61000-3-3 (1995+A1:2001+A2:2005)

EN 55024 (1998+A1:2001+A2:2003) EN 50130-4 (1995+A1:1998+A2:2003)

IEC 61000-4-2 (2008) EN 61000-4-2 (1995)

IEC 61000-4-3 (2008) EN 61000-4-3 (1996)

IEC 61000-4-4 (2004) EN 61000-4-4 (1995)

IEC 61000-4-5 (2005) EN 61000-4-5 (1995)

IEC 61000-4-6 (2008) EN 61000-4-6 (1996)

IEC 61000-4-8 (2009) EN 61000-4-11 (1994)

IEC 61000-4-11 (2004)

Responsible for marking this declaration if the:

Manufacturer  Authorized representative established within the EU

Authorized representative established within the EU (if applicable):

Company Name: Planet Technology Corp.

Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)

Person responsible for making this declaration

Name, Surname Kent Kang

Position / Title : Product Manager

Taiwan 27, Aug., 2010

Place Date Legal Signature

PLANET TECHNOLOGY CORPORATION

e-mail: sales@planet.com.tw http://www.planet.com.tw

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528

Specyfikacje produktu

Marka:	Planet
Kategoria:	Karta sieciowa/adapter
Model:	POE-161

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Planet POE-161, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Karta sieciowa/adapter Planet

Planet IPOE-270-12V Instrukcja

11 Września 2024

Planet WNL-U556M Instrukcja

10 Września 2024

Planet POE-171A-60 Instrukcja

10 Września 2024

Planet WNL-U554A Instrukcja

7 Września 2024

Planet HPOE-2400G Instrukcja

5 Września 2024

Planet WNL-U555HA Instrukcja

4 Września 2024

Planet VC-203PT Instrukcja

4 Września 2024

Planet POE-400 Instrukcja

4 Września 2024

Planet POE-152 Instrukcja

31 Sierpnia 2024

Planet POE-164 Instrukcja

28 Sierpnia 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

ZyXEL WBE510D Instrukcja

14 Stycznia 2025

StarTech.com 107B-USB-HDMI Instrukcja

14 Stycznia 2025

StarTech.com ST1000SPEXD4T Instrukcja

8 Stycznia 2025

Edimax EU-4307 V2 Instrukcja

29 Grudnia 2024

StarTech.com O1210I-NETWORK-CARD Instrukcja

28 Grudnia 2024

Micro Connect MC-POEADAPTER-USB-C Instrukcja

27 Grudnia 2024

Lindy 43237 Instrukcja

27 Grudnia 2024

Lindy 43247 Instrukcja

27 Grudnia 2024

Akasa AK-PCCE25-01 Instrukcja

26 Grudnia 2024

OpenVox AE2410E40 Instrukcja

26 Grudnia 2024