Instrukcja obsługi Pioneer S-81B-LR-K

Pioneer Głośniki S-81B-LR-K

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pioneer S-81B-LR-K (54 stron) w kategorii Głośniki. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/54
1
En
2
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
Before you start
• The nominal impedance of this speaker system is 6 Ω.
Connect the speaker system to an amplifier with a load
impedance ranging from 6 Ω to 16 Ω (a model with “6 Ω to
16 Ω” displayed on the speaker output terminals).
In order to prevent damage to the speaker system resulting
from input overload, please observe the following precautions:
• Do not supply power to the speaker system in excess of the
maximum permissible input.
• When using a graphic equalizer to emphasize loud sounds
in the high-frequency range, do not use excessive amplifier
volume.
• Do not try to force a low-powered amplifier to produce loud
volumes of sound (the amplifier’s harmonic distortion will
be increased, and you may damage the speaker).
Caution: installation
• Do not attach these speakers to the wall or ceiling. They may
fall off and cause injury.
• Do not install your speakers overhead on the ceiling or wall. If
improperly attached, the speaker grille can fall and cause
damage or personal injury.
• Switch off and unplug your AV equipment and consult the
instructions when connecting up components. Make sure you
use the correct connecting cables.
• The grille is affixed with magnets. The grille may fall if force is
applied to the grille in a horizontal direction. When cleaning
the speaker, remove the grille first.
Caution: in use
• Do not place the speaker on an unstable surface. It could
present a hazard if it falls, as well as damaging the equipment.
• Do not use the speaker to output distorted sound for long
periods of times. This can result in a fire hazard.
• Do not sit or stand on the speaker, or let children play on the
speaker.
• Do not put large or heavy objects on top of the speaker.
• Do not place magnetic objects such as screwdrivers or iron
parts near the tweeter or woofer. Since the speakers use
strong magnets, the objects may be attracted, causing injury
or damaging the diaphragm.
Cleaning the speaker cabinet
With normal use, wiping with a dry cloth should be sufficient to
keep the cabinet clean. If necessary, clean with a cloth dipped in
a neutral cleanser diluted five or six times with water, and wrung
out well. Do not use furniture wax or cleansers.
Never use thinners, benzine, insecticide sprays or other chemicals
on or near this unit since these will corrode the surfaces.
Cleaning the glossy finish of the speaker system
S-81B-LR-K only
• If you use a dusty or hard cloth or if you rub the screen hard,
the finish of the product will be scratched.
• If you clean the surface of the speaker system with a wet cloth,
water droplets on the surface may enter into the product,
resulting in malfunction.
• When cleaning the finish of the speaker system, gently wipe it
with a dry soft cloth; the supplied cleaning cloth.
What’s in the box
Spikes x 6
Spike bases x 6
Non-skid pads x 8
Grille x 2
Cleaning cloth (for S-81B-LR-K only) x 1
Operating instructions
For U.S. model
For European model
WARNING:
Handling the cord on this product or
cords associated with accessories sold with the
product will expose you to chemicals listed on
proposition 65 known to the State of California and
other governmental entities to cause cancer and
birth defect or other reproductive harm.
D36-P4_A_En
Wash hands after handling
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used
electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to
designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential
negative effects on the environment and human health.
K058_A_En
3
En
English
How to install
Choosing where to place the speaker systems
• Sounds played through speaker systems are easily affected in
subtle ways by the conditions in the listening space.
• For best sound, choose a solid floor upon which to place the
speakers, and position the speakers as shown below. The level
of low sounds can be adjusted by moving the speakers closer
to or further from the wall. Adjust the speakers so that they are
equidistant from their respective side walls to assure balanced
sound.
• Place the left and right speakers equal distances from your
listening position for good stereo sound. Use speaker cords of
the same length for each speaker.
• So far as possible, place the front left and front right speakers
on the same plane as the TV screen.
• To achieve optimum surround sound, you should place the TV
between the left and right speakers, with the speakers
pointing at a 50 to 60 degree angle toward the listening
position.
• If the room has a lot of reverberation, we recommend hanging
heavy fabric on the walls, and/or putting a carpet on the floor
to damp the sound. For best results, cover walls completely.
• These speakers are bookshelf-type speakers which will give
their best performance when placed on a solid, level surface
off the floor. Placing the speakers directly on the floor will
result in boomy, undefined sound. Ideally, the tweeters should
be at about ear level when seated in your listening position.
We recommend using the CP-81B-K/MK speaker stand for
optimal sound and stability.
If you choose to use the CP-81B-K/MK speaker stand, make
sure you secure it with the screws provided.
(for more details, refer to the operating instructions of
CP-81B-K/MK)
• Pioneer assumes no liability whatsoever for damages
resulting from assembly, improper mounting, insufficient
reinforcement, misuse of the product, acts of nature, etc.
S-81B-LR-QL/W only
• The cabinet uses sliced veneer made of natural wood. Do not
place the speaker where it will be in direct sunlight, and avoid
positioning it near heaters and air conditioners. Doing so may
cause warping and discoloration of the speaker cabinet and
damage to the speaker.
When installing directly on the floor
Use the furnished spikes or non-skid pads when installing the
speaker directly on floor surface.
Using the spikes
This speaker system includes spikes that you can use to isolate
the speaker from the floor. Use the supplied spike bases to avoid
scratching the floor or other surface where the speaker is placed.
1 Twist the spikes into the threaded metal inserts
embedded in the bottom of the speaker.
2 Set the spike bases in the positions where the points of
the three spikes will strike when the speaker is set down.
3 Set the speaker on the spike bases and check to confirm
the speaker does not rock.
• Always use the spike bases as shown, with the indented
surface facing up to receive the spike point.
• It is very dangerous to try and set the spike while tilting the
speaker. Be sure to place the unit on a soft area (such as a
blanket) so that it does not damage the floor, and carry out the
installation with at least two people.
50 to 60
20 cm
(7 7/8 in.)
50 cm
(19 11/16 in.)
If you do not use the spike bases when placing the
speakers, the spikes may cause damage to the floor. If
you plan on using the spikes we highly recommend to
use the spike bases.

Specyfikacje produktu

Marka: Pioneer
Kategoria: Głośniki
Model: S-81B-LR-K

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pioneer S-81B-LR-K, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Głośniki Pioneer

Pioneer

Pioneer CS-3070 Instrukcja

6 Października 2024
Pioneer

Pioneer S-81B-LR-K Instrukcja

5 Lipca 2024
Pioneer

Pioneer S-31B-LR-QL Instrukcja

4 Lipca 2024
Pioneer

Pioneer S-HS100 Instrukcja

1 Lipca 2024

Instrukcje Głośniki

Najnowsze instrukcje dla Głośniki

Steren

Steren SPK-1100BL Instrukcja

15 Października 2024
Pyle

Pyle PBMSPG6 Instrukcja

14 Października 2024
Marshall

Marshall Tufton Instrukcja

14 Października 2024
Sunstech

Sunstech SPUBT780 Instrukcja

14 Października 2024
Definitive Technology

Definitive Technology Mythos XTR-50 Instrukcja

14 Października 2024
Wharfedale

Wharfedale Diamond 8.2 Pro Instrukcja

14 Października 2024
Bang & Olufsen

Bang & Olufsen BeoLab Penta Instrukcja

13 Października 2024
Marquant

Marquant 002-222 Instrukcja

13 Października 2024
Naxa

Naxa NAS-3060 Instrukcja

13 Października 2024
Philips

Philips SPA1301 Instrukcja

13 Października 2024