Instrukcja obsługi Pioneer PRS-D1200SPL
Pioneer
Wzmacniacz samochodowy
PRS-D1200SPL
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pioneer PRS-D1200SPL (128 stron) w kategorii Wzmacniacz samochodowy. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/128
1
Before Using This Product ...................... 1
Product registration .......................................... 1
In case of trouble .............................................. 2
About This Product .......................................... 2
CAUTION ........................................................ 2
WARNING ........................................................ 2
Setting the Unit .......................................... 3
MODE SELECT Switch .................................. 3
Bass Boost Frequency Control .......................... 3
Bass Boost Level Control .................................. 3
Terminal Cover ................................................ 3
Cut Off Frequency Control for LPF .................. 3
Gain Control ...................................................... 4
BFC (Beat Frequency Control) Switch ............ 4
HEAT Indicator ................................................ 4
PROTECT Indicator .......................................... 4
Power Indicator ................................................ 4
Subsonic Select Switch .................................... 4
Setting the Gain properly .................................. 5
Connecting the Unit .................................. 6
Connection Diagram ........................................ 7
Solderless Terminal Connections ...................... 8
Connecting the Speaker Output Terminals ...... 8
Connecting the Power Terminal ........................ 9
Setting the Gain for synced amplifier ............ 10
Connecting the Speaker Wires ........................ 10
Installation ................................................ 15
Attaching the Bass boost remote control ........ 15
Example of installation on the floor mat
or on the chassis ...................................... 16
Replacing the terminal cover .......................... 16
Changing the Direction of the Badge .............. 16
Additional information ............................ 17
Troubleshooting .............................................. 17
Specifications .......................................... 18
Thank you for purchasing this PIONEER
product. Before attempting operation, be
sure to read this manual.
Private households in the 25 member
states of the EU, in Switzerland and
Norway may return their used electronic
products free of charge to designated col-
lection facilities or to a retailer (if you pur-
chase a similar new one).
For countries not mentioned above, please
contact your local authorities for the cor-
rect method of disposal.
By doing so you will ensure that your dis-
posed product undergoes the necessary
treatment, recovery and recycling and thus
prevent potential negative effects on the
environment and human health.
Product registration
Visit us at the following site:
Register your product. We will keep the
details of your purchase on file to help you
refer to this information in the event of an
insurance claim such as loss or theft.
If you want to dispose this
product, do not mix it with
general household waste. There
is a separate collection system
for used electronic products in
accordance with legislation that
requires proper treatment,
recovery and recycling.
Contents Before Using This Product
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO
NEDERLANDS
êìëëäàâ
2
In case of trouble
When the unit does not operate properly,
contact your dealer or the nearest autho-
rized PIONEER Service Station.
About This Product
This product is a class D amplifier for the
subwoofer. If both L (left) and R (right)
channels are connected to the RCA input
of this product, output is mixed because
this product is a mono amplifier.
CAUTION
•Never replace the fuse with one of greater value
or rating than the original fuse. Use of an
improper fuse could result in overheating and
smoke and could cause damage to the product
and injury including burns.
•Use the supplied hexagonal wrench to tighten
screws when fastening wires to the terminal or
when changing the direction of the badge. The
use of a long, commercially available hexagonal
wrench can cause excessive torque to be applied
possibly resulting in damage to terminals and
wires.
WARNING
•Always use the recommended battery wire and
ground wire, which is sold separately. Connect
the battery wire directly to the car battery positive
terminal (+) and the ground wire to the car body.
•Do not touch the amplifier with wet hands.
Otherwise you may get an electric shock. Also,
do not touch the amplifier when it is wet.
•For traffic safety and to maintain safe driving
conditions, keep the volume low enough so that
you can still hear normal traffic sound.
•Check the connections of the power supply and
speakers if the fuse of the separately sold battery
wire or the amplifier fuse blows. Detect the cause
and solve the problem, then replace the fuse with
another one of the same size and rating.
•To prevent malfunction of the amplifier and
subwoofer, the protective circuit will cut the
power supply to the amplifier (sound will stop)
when an abnormal condition occurs. In such a
case, switch the power to the system OFF and
check the connection of the power supply and
subwoofer. Detect the cause and solve the
problem.
•Contact the dealer if you cannot detect the cause.
•To prevent an electric shock or short-circuit
during connection and installation, be sure to
disconnect the negative (–) terminal of the battery
beforehand.
•Confirm that no parts are behind the panel when
drilling a hole for installation of the amplifier. Be
sure to protect all cables and important equipment
such as fuel lines, brake lines and the electrical
wiring from damage.
•DO NOT allow amplifier to come into contact
with liquids due to, for example, the location
where the amplifier is installed. Electrical shock
could result. Also, amplifier and speaker damage,
smoke, and overheating could result from contact
with liquids. In addition, the amplifier surface
and the surface of any attached speakers could
become hot to the touch and minor burns could
result.
Specyfikacje produktu
| Marka: | Pioneer |
| Kategoria: | Wzmacniacz samochodowy |
| Model: | PRS-D1200SPL |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Pioneer PRS-D1200SPL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wzmacniacz samochodowy Pioneer
4 Lipca 2024
4 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
Instrukcje Wzmacniacz samochodowy
- Wzmacniacz samochodowy Marquant
- Wzmacniacz samochodowy Phoenix Gold
- Wzmacniacz samochodowy Kenwood
- Wzmacniacz samochodowy JVC
- Wzmacniacz samochodowy Auna
- Wzmacniacz samochodowy JL Audio
- Wzmacniacz samochodowy Hifonics
- Wzmacniacz samochodowy Autotek
- Wzmacniacz samochodowy Macrom
Najnowsze instrukcje dla Wzmacniacz samochodowy
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024