Instrukcja obsługi Pioneer AVIC-X940BT

Pioneer Nawigacja AVIC-X940BT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pioneer AVIC-X940BT (240 stron) w kategorii Nawigacja. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/240
Operation Manual
MULTIMEDIA NAVIGATION RECEIVER
AVIC-Z140BH
AVIC-X940BT
Notice to all users:
This software requires that the navigation system is
properly connected to your vehicles parking brake and
depending on your vehicle, additional installation may
be required. For more information, please contact your
Authorized Pioneer Electronics retailer or call us at
(800) 421-1404.
Be sure to read Important Information for the User
first!
Important Information for the User includes the
important information that you must understand before
using this navigation system.
English
Thank you for buying this Pioneer product.
Please read through these instructions so you will know how to operate your model
properly. After you have finished reading the instructions, keep this document in a
safe place for future reference.
Important
The screens shown in the examples may differ
from actual screens.
Actual screens may be changed without notice
for performance and function improvements.
Introduction
Manual overview 10
How to use this manual 10
Conventions used in this manual 10
Terms used in this manual 10
Notice regarding video viewing 11
Notice regarding DVD-Video viewing 11
Notice regarding MP3 file usage 11
iPod compatibility 11
Map coverage 11
Protecting the LCD panel and screen 12
Notes on internal memory 12
Before removing the vehicle
battery 12
Data subject to erasure 12
Basic operation
Checking part names and functions 14
Protecting your product from theft 16
Removing the detachable
faceplate 16
Attaching the detachable faceplate 16
Adjusting the LCD panel angle 17
Inserting and ejecting a disc 17
Inserting a disc (for AVIC-Z140BH) 17
Ejecting a disc (for AVIC-Z140BH) 18
Inserting a disc (for AVIC-X940BT) 18
Ejecting a disc (for AVIC-X940BT) 18
Inserting and ejecting an SD memory
card 18
Inserting an SD memory card (for AVIC-
Z140BH) 19
Ejecting an SD memory card (for AVIC-
Z140BH) 19
Inserting an SD memory card (for AVIC-
X940BT) 20
Ejecting an SD memory card (for AVIC-
X940BT) 20
Plugging and unplugging a USB storage
device 21
Plugging in a USB storage device 22
Unplugging a USB storage device 22
Connecting and disconnecting an iPod 22
Connecting your iPod 22
Disconnecting your iPod 22
Startup and termination 23
On first-time startup 23
Regular startup 23
A message about the map
database 24
Demonstration images 24
How to use the navigation menu screens
Screen switching overview 26
What you can do on each menu 27
Shortcut Menu 27
Selecting the shortcut 27
Removing a shortcut 28
Operating list screens (e.g. POI list) 28
Operating the on-screen keyboard 28
How to use the map
How to read the map screen 29
Enlarged map of the intersection 30
Display during freeway driving 31
Types of the road stored in the map
database 31
Operating the map screen 31
Changing the scale of the map 31
Switching the map orientation 32
Scrolling the map to the position you
want to see 32
Contents
En
2
Viewing information about a specified
location 32
Using shortcut menus on the map 33
Switching the view mode 34
Eco-friendly driving functions
Checking the eco-friendly driving status 35
Displaying Eco Drive Level guidance 36
Sudden start alert 36
Searching for and selecting a location
The basic flow of creating your route 37
Searching for a location by address 38
Searching for a city name first 38
Finding the location by specifying the
house number 39
Searching by selected city history 40
Setting up a route to your home 40
Searching for Points of Interest (POI) 40
Searching for POIs by preset
categories 41
Searching for a POI directly from the
name of the facilities 41
Searching for a nearby POI 41
Searching for POIs around the
destination 42
Searching for POIs around the city 42
Selecting destination from Favorites43
Searching for POIs by using the data on the
SD memory card 43
Selecting a location you searched for
recently 44
Searching for a location by coordinates 44
After the location is decided
Setting a route to your destination 45
Displaying multiple routes 45
Checking and modifying the current
route
Displaying the route overview 46
Modifying the route calculation
conditions 46
Items that users can operate 46
Checking the current itinerary 47
Editing waypoints 48
Adding a waypoint 48
Deleting a waypoint 48
Sorting waypoints 49
Canceling the route guidance 49
Registering and editing locations
Storing favorite locations 50
Registering a location by
Favorites50
Registering a location by scroll
mode 50
Editing registered locations 50
Editing the favorite location in the
list 50
Editing your home 51
Sorting the favorite locations in the
list 51
Deleting a favorite location from the
list 52
Exporting and importing favorite
locations 52
Exporting favorite locations 52
Importing favorite locations 52
Deleting the destination history from the
list 53
Using traffic information
Checking all traffic information 54
Checking traffic information on the
route 55
How to read traffic information on the
map 55
En 3
Contents
Viewing the traffic flow 55
Setting an alternative route to avoid traffic
congestion 56
Checking for traffic congestion
automatically 57
Checking traffic information
manually 57
Selecting traffic information to display 58
Selecting preferred RDS-TMC service
provider manually 58
Registering and connecting a Bluetooth
device
Preparing communication devices 59
Registering your Bluetooth devices 59
Searching for nearby Bluetooth
devices 59
Pairing from your Bluetooth
devices 60
Searching for a specified Bluetooth
device 61
Deleting a registered device 62
Connecting a registered Bluetooth device
manually 62
Setting for priority connecting 63
Using hands-free phoning
Displaying the phone menu 64
Making a phone call 64
Direct dialing 64
Making a call home easily 65
Calling a number in the phone
book 65
Dialing from the history 66
Dialing a favorite location 66
Dialing a facilitys phone number 66
Dialing from the map 67
Receiving a phone call 67
Answering an incoming call 67
Transferring the phone book 68
Changing the order of names in the
phone book 69
Deleting registered contacts 69
Changing the phone settings 69
Editing the device name 69
Editing the password 70
Stopping Bluetooth wave
transmission 70
Echo canceling and noise
reduction 70
Answering a call automatically 70
Setting the automatic rejection
function 71
Clearing memory 71
Updating the Bluetooth wireless
technology software 72
Notes for hands-free phoning 72
Basic operations of the AV source
Displaying the AV operation screen 74
Selecting a source 74
Operating list screens (e.g. iPod list
screen) 74
Switching between the AV operation
screen and the list screen 74
Selecting an item 75
Returning to the previous display 75
Using the radio (FM)
Starting procedure 76
Reading the screen 76
Using the touch panel keys 77
Storing and recalling broadcast
frequencies 77
Operating by hardware buttons 78
Using advanced functions 78
Storing the strongest broadcast
frequencies 78
Tuning in strong signals 78
Contents
En
4
Using the radio (AM)
Starting procedure 80
Reading the screen 80
Using the touch panel keys 81
Storing and recalling broadcast
frequencies 81
Operating by hardware buttons 82
Using advanced functions 82
Storing the strongest broadcast
frequencies 82
Tuning in strong signals 82
HD Radioreception
HD Radio broadcasting 84
Starting procedure 84
Reading the screen 85
Using the touch panel keys 86
Storing and recalling broadcast
frequencies 87
Operating by hardware buttons 87
Switching the display 87
Scrolling the detailed information 88
Storing song information to an iPod (iTunes
Tagging) 88
Using advanced functions 88
Storing the strongest broadcast
frequencies 89
Switching the seek mode 89
Tuning in strong signals 89
Switching the reception mode 89
Playing audio CDs
Starting procedure 91
Reading the screen 91
Using the touch panel keys 92
Operating by hardware buttons 93
Using advanced functions 93
Playing music files on ROM
Starting procedure 94
Reading the screen 94
Using the touch panel keys 96
Operating by hardware buttons 97
Using advanced functions 97
Playing a DVD-Video
Starting procedure 99
Reading the screen 99
Using the touch panel keys 100
Resuming playback (Bookmark) 101
Searching for a specific scene and
starting playback from a specified
time 102
Direct number search 102
Operating the DVD menu 102
Using DVD menu by touch panel
keys 102
Frame-by-frame playback 103
Slow motion playback 103
Operating by hardware buttons 103
Using advanced functions 103
Playing a DivX video
Starting procedure 105
Reading the screen 105
Using the touch panel keys 106
Frame-by-frame playback 107
Slow motion playback 107
Starting playback from a specified
time 108
Operating by hardware buttons 108
Using advanced functions 108
DVD-Video or DivX setup
Displaying DVD/DivX® Setup menu 109
Setting the top-priority languages 109
Setting the angle icon display 109
Setting the aspect ratio 110
Setting the parental lock 110
En 5
Contents
Setting the code number and
level 110
Setting the auto play 111
Setting the subtitle file for DivX 111
Language code chart for DVDs 112
Playing music files (from USB or SD)
Starting procedure 113
Reading the screen 113
Using the touch panel keys (Music) 115
Operating by hardware buttons 116
Using advanced functions 116
Playing video files (from USB or SD)
Starting procedure 117
Reading the screen 117
Using the touch panel keys (Video) 118
Searching for a specific scene and
starting playback from a specified
time 119
Operating by hardware buttons 119
Using advanced functions 119
Using an iPod (iPod)
Starting procedure 120
Reading the screen 120
Using the touch panel keys 122
Operating by hardware buttons 124
Starting the video playback 124
Narrowing down a song or video with the
list 124
Operating an application for iPhone from the
navigation system 126
Starting procedure 126
Using the touch panel keys 127
Using the keyboard 127
When using an application not
compatible with Advanced App
Mode 128
Operating the functions from your iPod 128
Starting procedure 128
Using the touch panel keys 129
Playing MusicSphere 130
Starting procedure 130
Reading the screen 130
Using the touch panel keys 130
Using advanced functions 130
Using smartphone applications
Information for the smartphone
compatibility 132
Starting procedure 133
For Android device and BlackBerry
device users 133
For iPhone users 133
Using Pandora® internet radio 134
Reading the screen 134
Using the touch panel keys 135
Operating by hardware buttons 136
Using Aha Radio 136
Reading the screen 136
Using the touch panel keys 137
Functions coupled with Aha Radio and
the navigation system 138
Using the Bluetooth audio player
Starting procedure 139
Reading the screen 139
Using the touch panel keys 141
Operating by hardware buttons 141
Using advanced functions 142
Using the XM tuner
Starting procedure 143
Reading the screen 143
Using the touch panel keys 145
Selecting an XM channel directly 146
Displaying the Radio ID 146
Storing and recalling broadcast
stations 147
Contents
En
6
Selecting a channel from the list 147
Using MyMixfunction 147
Operating by hardware buttons 148
Using advanced functions 148
Setting the memorized songs 148
Using the SIRIUS tuner
Starting procedure 149
Reading the screen 149
Using the touch panel keys 150
Selecting a SIRIUS channel
directly 151
Display the Radio ID 151
Storing and recalling broadcast
stations 151
Using the song alert function 152
Using the Instant Replay
function 152
Operating by hardware buttons 153
Using advanced functions 153
Setting the memorized songs 153
Using the Game Alert function 153
Displaying Game Information 154
Using AV input
Reading the screen 155
Using AV1 155
Using AV2 155
Using the touch panel keys 155
Using the external unit (EXT1, EXT2)
Starting procedure 156
Reading the screen 156
Using the touch panel keys 157
Customizing preferences
Displaying the screen for navigation
settings 158
Checking the connections of leads 158
Checking sensor learning status and driving
status 159
Clearing status 159
Using the fuel consumption function 160
Inputting the fuel consumption
information for calculating the fuel
cost 160
Calculating the fuel consumption 160
Exporting the data of fuel cost
information 161
Recording your travel history 162
Using the demonstration guidance 162
Registering your home 163
Correcting the current location 163
Changing the eco-function setting 163
Clearing the fuel consumption
information 164
Displaying the screen for map settings 164
Setting the auto-zoom display 165
Setting the detailed city map 165
Setting the barrier graphic for city map 165
Displaying the traffic notification icon 166
Displaying the Bluetooth connection
icon 166
Setting the current street name display 166
Setting the display of icons of favorite
locations 167
Displaying the 3D landmarks 167
Displaying maneuvers 167
Displaying the fuel consumption
information 168
Displaying POI on the map 168
Displaying preinstalled POIs on the
map 168
Displaying the customized POIs 169
Changing the view mode 169
Setting the map color change between day
and night 169
Changing the road color 170
En 7
Contents
Changing the setting of navigation
interruption screen 170
Selecting the Quick Accessmenu 170
Displaying the screen for system
settings 171
Customizing the regional settings 171
Setting the Volume for Guidance and
Phone 173
Changing the preinstalled splash
screen 174
Changing to the splash screen stored
in the SD memory card 174
Setting for rear view camera 175
Adjusting the response positions of the
touch panel (touch panel
calibration) 175
Setting the illumination color 176
Checking the version information 176
Selecting the video for rear display 177
Adjusting the picture 177
Displaying the screen for AV system
settings 178
Setting video input 1 (AV1) 178
Setting video input 2 (AV2) 179
Changing the wide screen mode 179
Setting the rear output 180
Switching the muting/attenuation
timing 180
Switching the muting/attenuation
level 180
Acquiring/Cataloging iPod music
information 181
Displaying your DivX VOD registration
code 182
Displaying your DivX VOD
deregistration code 182
Selecting the smartphone connection
method 182
Displaying the screen for AV sound
settings 182
Using balance adjustment 183
Using the equalizer 183
Adjusting the equalizer curve
automatically (Auto EQ) 185
Using sonic center control 187
Adjusting loudness 187
Using subwoofer output 188
Using the high pass filter 188
Adjusting source levels 188
Enhancing bass (Bass Booster) 189
Replicating the settings 189
Turning off the screen 189
Operating your navigation system with
voice
To Ensure Safe Driving 190
Basics of the voice operation 190
Flow of the voice operation 190
Starting the voice operation 190
How to use the voice operation 191
Available basic voice commands 192
Basic commands 192
Voice operation for the iPod 192
Voice operation for AV source (other
than iPod) 193
Voice commands related to hands-free
phoning 194
Tips for the voice operation 194
Other functions
Setting the anti-theft function 196
Setting the password 196
Entering the password 196
Deleting the password 196
Forgotten password 196
Returning the navigation system to the
default or factory settings 197
Restoring the default setting 197
Contents
En
8
Returning the navigation system to the
initial state 197
Setting items to be deleted 198
Appendix
Troubleshooting 200
Messages for navigation functions 205
Messages for audio functions 207
Positioning technology 209
Positioning by GPS 209
Positioning by dead reckoning 209
How do GPS and dead reckoning work
together? 209
Handling large errors 210
When positioning by GPS is
impossible 210
Conditions likely to cause noticeable
positioning errors 211
Route setting information 213
Route search specifications 213
Handling and care of discs 213
Built-in drive and care 214
Ambient conditions for playing a
disc 214
Playable discs 214
DVD-Video and CD 214
AVCHD recorded discs 215
Playing DualDisc 215
Dolby Digital 215
Detailed information for playable media 215
Compatibility 215
Media compatibility chart 218
Bluetooth 222
About the SAT RADIO READY Logo 222
HD RadioTechnology 222
SD and SDHC logo 223
WMA/WMV 223
DivX 223
AAC 223
Android223
BlackBerry® 224
Detailed information regarding connected
iPod devices 224
iPod and iPhone 224
iTunes 224
Using app-based connected content 224
Pandora® internet 225
Aha Radio 225
Using the LCD screen correctly 225
Handling the LCD screen 225
Liquid crystal display (LCD)
screen 225
Maintaining the LCD screen 225
LED (light-emitting diode)
backlight 226
Display information 227
Destination Menu 227
Phone Menu 227
Settings Menu 228
Navi Settings menu 228
System Settings menu 229
Map Settings menu 229
Bluetooth Settings menu 230
AV System Settings menu 230
AV Sound Settings menu 231
Glossary 232
Specifications 235
En 9
Contents
Manual overview
Before using this product, be sure to read Im-
portant Information for the User (a separate
manual) which contains warnings, cautions,
and other important information that you
should note.
The screen examples shown in this manual
are the ones for AVIC-Z140BH. If you use a dif-
ferent model, the screens that appear may dif-
fer from the examples in the manual.
How to use this manual
Finding the operation procedure for
what you want to do
When you have decided what you want to do,
you can find the page you need from the Con-
tents.
Finding the operation procedure from
a menu name
If you want to check the meaning of an item
displayed on the screen, you will find the ne-
cessary page from the Display information at
the end of the manual.
Glossary
Use the glossary to find the meanings of
terms.
Conventions used in this manual
Before moving on, take a few minutes to read
the following information about the conven-
tions used in this manual. Familiarity with
these conventions will help you greatly as you
learn how to use your new equipment.
!Buttons on your navigation system are de-
scribed in ALL CAPITAL,BOLD lettering:
e.g.)
HOME button, MODE button.
!Menu items, screen titles, and functional
components are described in bold with
double quotation marks “”:
e.g.)
Destination Menuscreen or AV
Sourcescreen
!Touch panel keys that are available on the
screen are described in bold in brackets [ ]:
e.g.)
[Destination], [Settings].
!Extra information, alternatives and other
notes are presented in the following for-
mat:
e.g.)
pIf the home location has not been stored
yet, set the location first.
!Functions of other keys on the same screen
are indicated with #at the beginning of the
description:
e.g.)
#If you touch [OK], the entry is deleted.
!References are indicated like this:
e.g.)
=For details of the operations, refer to
Screen switching overview on page 26.
Terms used in this manual
Front displayand Rear display
In this manual, the screen that is attached to
the body of this navigation unit will be referred
to as the Front display. Any additional screen
that is commercially available and can be con-
nected to this navigation unit will be referred
to as the Rear display.
Video image
Video imagein this manual indicates mov-
ing images of DVD-Video, DivX®, iPod, and any
equipment that is connected to this system
with an RCA cable, such as general-purpose
AV equipment.
External storage device (USB, SD)
The SD memory card, SDHC memory card,
microSD card, microSDHC card and USB
memory device are collectively referred to as
the external storage device (USB, SD). If it in-
dicates the USB memory only, it is referred to
as the USB storage device.
En
10
Chapter
01 Introduction
SD memory card
The SD memory card, SDHC memory card,
microSD card and microSDHC card are col-
lectively referred to as the SD memory
card.
Notice regarding video
viewing
Remember that use of this system for com-
mercial or public viewing purposes may con-
stitute an infringement on the authors rights
as protected by the Copyright Law.
Notice regarding DVD-
Video viewing
This item incorporates copy protection tech-
nology that is protected by U.S. patents and
other intellectual property rights of Rovi
Corporation. Reverse engineering and disas-
sembly are prohibited.
Notice regarding MP3 file
usage
Supply of this navigation system conveys only
a license for private, non-commercial use and
does not convey a license nor imply any right
to use this product in any commercial (i.e. rev-
enue-generating), real time broadcasting (ter-
restrial, satellite, cable and/or any other
media), broadcasting/streaming via internet,
intranets and/or other networks or in other
electronic content distribution systems, such
as pay-audio or audio-on-demand applica-
tions. An independent license for such use is
required. For details, please visit
http://www.mp3licensing.com.
iPod compatibility
This product supports only the following iPod
models and iPod software versions. Others
may not work correctly.
!iPod touch (4th generation): iOS 5.0
!iPod touch (3rd generation): iOS 5.0
!iPod touch (2nd generation): iOS 4.2.1
!iPod touch (1st generation): iOS 3.1.3
!iPod classic 120GB: Ver. 2.0.1
!iPod classic 160GB (2009): Ver. 2.0.4
!iPod classic 80GB: Ver. 1.1.2
!iPod classic 160GB (2007): Ver. 1.1.2
!iPod nano (6th generation): Ver. 1.1
!iPod nano (5th generation): Ver. 1.0.2
!iPod nano (4th generation): Ver. 1.0.4
!iPod nano (3rd generation): Ver. 1.1.3
!iPhone 4S: iOS 5.0
!iPhone 4: iOS 5.0
!iPhone 3GS: iOS 5.0
!iPhone 3G: iOS 4.2.1
!iPhone: iOS 3.1.3
pIn this manual, iPod and iPhone will be re-
ferred to as iPod.
pWhen you use this navigation system with
a Pioneer USB interface cable for iPod (CD-
IU51V) (sold separately), you can control an
iPod compatible with this navigation sys-
tem.
pOperation methods may vary depending on
the iPod models and the software version
of iPod.
pDepending on the software version of the
iPod, it may not be compatible with this
equipment.
For details about iPod compatibility with
this navigation system, refer to the informa-
tion on our website.
Map coverage
For details about the map coverage of this na-
vigation system, refer to the information on
our website.
En 11
Chapter
01
Introduction
Introduction
Protecting the LCD panel
and screen
pDo not allow direct sunlight to fall on the
LCD screen when this product is not being
used. Extended exposure to direct sunlight
can result in LCD screen malfunction due
to the resulting high temperatures.
pWhen using a cellular phone, keep the an-
tenna of the cellular phone away from the
LCD screen to prevent disruption of the
video in the form of spots, colored stripes,
etc.
pTo protect the LCD screen from damage, be
sure to touch the touch panel keys with
your finger only and gently touch the
screen.
Notes on internal memory
Before removing the vehicle
battery
If the battery is disconnected or discharged,
the memory will be erased and must be repro-
grammed.
pSome data remains. Be sure to read Setting
items to be deleted first.
=For details, refer to Setting items to be
deleted on page 198.
Data subject to erasure
The information is erased by disconnecting
the yellow lead from the battery (or removing
the battery itself).
pSome data remains. Be sure to read Setting
items to be deleted first.
=For details, refer to Setting items to be
deleted on page 198.
En
12
Chapter
01 Introduction
En 13
Chapter
01
Introduction
Introduction
Checking part names and functions
This chapter gives information about the names of the parts and the main features using the buttons.
AVIC-Z140BH (with the LCD panel closed)
7654321
AVIC-Z140BH (with the LCD panel open)
8
9
En
14
Chapter
02 Basic operation
AVIC-X940BT
6 8
7
9
3
a
4
5
c
b
1button
!Press the button to activate voice op-
erations.
=For details, refer to Chapter 32.
!Press and hold the button to switch
the AV source to mute.
To cancel the muting, press and hold it
again.
2VOL (+/) button
Press to adjust the AV (Audio and Video)
source volume.
3HOME button
!Press the HOME button to display the
Top Menuscreen.
!Press to switch between the Classic
Menu and the Shortcut Menu while the
Top Menuis displayed.
=For details, refer to What you can do
on each menu on page 27.
!Press and hold to turn off the screen dis-
play.
4MODE button
!Press to switch between the map screen
and the AV operation screen.
!Press to display the map screen while
the navigation function screen is dis-
played.
!Press and hold to display the Picture
Adjustmentscreen.
=For details, refer to Adjusting the pic-
ture on page 177.
5TRK button
Press to perform manual seek tuning, fast
forward, reverse and track search controls.
6hbutton
7LCD screen
8Disc-loading slot
Insert a disc to play.
=For details, refer to Inserting and ejecting
a disc on page 17.
9SD card slot
=For details, refer to Inserting and ejecting
an SD memory card on page 18.
aMulti-control (Volume knob/ /MUTE)
!Rotate to adjust the AV (Audio and
Video) source volume.
En 15
Chapter
02
Basic operation
Basic operation
!Press the center of Multi-control to hear
the route guidance.
!Press and hold the center of Multi-con-
trol to mute the AV (Audio and Video)
source. To cancel the muting, press and
hold it again.
bDetachable faceplate
cbutton
Press to remove the detachable faceplate
from the navigation system.
=For details, refer to Removing the detach-
able faceplate on this page.
Protecting your product
from theft
pThis function is available for AVIC-X940BT
only.
The detachable faceplate can be detached
from the navigation system to discourage
theft, as described below.
CAUTION
!Do not expose the detachable faceplate to ex-
cessive shock or disassemble it.
!Never grip the buttons tightly or use force
when removing or attaching.
!Keep the detachable faceplate out of reach of
small children to prevent them from putting it
in their mouths.
!After removing the detachable faceplate, keep
it in a safe place so it is not scratched or da-
maged.
!Keep the detachable faceplate out of direct
sunlight and high temperatures.
!When removing or attaching the detachable
faceplate, do so after turning the ignition
switch off (ACC OFF).
Removing the detachable
faceplate
pThe navigation system cannot be operated
while the detachable faceplate is removed
from the navigation system.
1 Press and hold the button, and slide
it down.
When you release your finger, the bottom of
the detachable faceplate separates slightly
from the navigation system.
2 Gently grip the bottom of the detach-
able faceplate and slowly pull it outward.
Detachable faceplate
Attaching the detachable faceplate
1 Slide the detachable faceplate all the
way into the navigation system.
Make sure the detachable faceplate is se-
curely connected to the mounting hooks of
the navigation system.
En
16
Chapter
02 Basic operation
2 Push the lower part of the detachable
faceplate until you hear a click.
If you fail to successfully attach the detach-
able faceplate to the navigation system, try
again but be careful not to force it as the
panel could be damaged.
Adjusting the LCD panel angle
pThis function is available for AVIC-Z140BH
only.
WARNING
Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel. Be
especially cautious of childrens hands and fin-
gers.
CAUTION
Do not open or close the LCD panel by force. This
may cause malfunction.
1 Press the hbutton.
The Monitor Setupscreen appears.
2 Touch or to adjust the angle.
3 Touch .
pThe adjusted angle of the LCD panel will be
memorized and the LCD panel will automa-
tically return to that angle the next time the
LCD panel is opened or closed.
Inserting and ejecting a disc
Inserting a disc (for AVIC-Z140BH)
WARNING
!Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel.
Be especially cautious of childrens hands
and fingers.
!Do not use with the LCD panel left open. If
LCD panel is left open, it may result in injury
in the event of an accident.
CAUTION
!Do not open or close the LCD panel by force.
This may cause malfunction.
!Do not operate this navigation system until
the LCD panel completely opens or closes. If
this navigation system is operated while the
LCD panel is opening or closing, the LCD
panel may stop at that angle for safety.
!Do not place a glass or a can on the open
LCD panel. Doing so may break this naviga-
tion system.
!Do not insert anything other than a disc into
the disc-loading slot.
1 Press the hbutton.
The Monitor Setupscreen appears.
2 Touch [Open].
The LCD panel opens, and the disc-loading
slot appears.
En 17
Chapter
02
Basic operation
Basic operation
3 Insert a disc into the disc-loading slot.
The disc is loaded, and the LCD panel closes.
Ejecting a disc (for AVIC-Z140BH)
1 Press the hbutton.
The Monitor Setupscreen appears.
2 Touch [Disc Eject].
The LCD panel opens, and the disc is ejected.
3 Remove the disc, and press the hbut-
ton.
The LCD panel closes.
Inserting a disc (for AVIC-X940BT)
CAUTION
Do not insert anything other than a disc into the
disc-loading slot.
%Insert a disc into the disc-loading slot.
Ejecting a disc (for AVIC-X940BT)
1 Press the hbutton.
The touch panel keys for ejecting the media
appear.
2 Touch [Disc Eject].
The disc is ejected.
Inserting and ejecting an
SD memory card
CAUTION
!Ejecting an SD memory card during data
transfer can damage the SD memory card. Be
sure to eject the SD memory card by the pro-
cedure described in this manual.
!If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
!Do not insert anything other than SD memory
cards.
En
18
Chapter
02 Basic operation
pThis system is not compatible with Multi
Media Card (MMC).
pCompatibility with all SD memory cards is
not guaranteed.
pThis unit may not achieve optimum perfor-
mance with some SD memory cards.
Inserting an SD memory card
(for AVIC-Z140BH)
CAUTION
!Do not press the hbutton when an SD mem-
ory card is not fully inserted. Doing so may da-
mage the card.
!Do not press the hbutton before an SD mem-
ory card has been completely removed. Doing
so may damage the card.
1 Press the hbutton.
The Monitor Setupscreen appears.
2 Touch [SD Insert].
The LCD panel opens, and the SD card slot ap-
pears.
3 Insert an SD memory card into the SD
card slot.
Insert it with the label surface facing to the up-
side and press the card until it clicks and com-
pletely locks.
4 Press the hbutton.
The LCD panel closes.
pIf data related to map data, such as custo-
mized POI data, is stored on the SD mem-
ory card, the navigation system restarts.
Ejecting an SD memory card
(for AVIC-Z140BH)
1 Press the hbutton.
The Monitor Setupscreen appears.
2 Touch [Eject SD].
The LCD panel opens.
3 Press the middle of the SD memory
card gently until it clicks.
En 19
Chapter
02
Basic operation
Basic operation
4 Pull the SD memory card out straight.
5 Press the hbutton.
The LCD panel closes.
pWhen you eject the SD memory card by
touching [Eject SD], the model information
that you are using will be automatically
stored into the SD memory card.
The utility program AVIC FEEDS will use
this information to recognize the model
that you use.
When the data related to map data is
stored
pThis description is for AVIC-Z140BH.
If data related to map data, such as custo-
mized POI data, is stored on the SD memory
card, operating procedures are slightly differ-
ent.
1 Press the hbutton and then touch
[Eject SD].
2 Touch [Yes].
The navigation system restarts, and then the
LCD panel opens.
3 Eject the SD memory card.
4 Press the hbutton.
The LCD panel closes.
Inserting an SD memory card
(for AVIC-X940BT)
%Insert an SD memory card into the SD
card slot.
Insert the SD memory card with the terminal
contacts facing down, and press the card until
it clicks and locks completely.
pIf data related to map data, such as custo-
mized POI data, is stored on the SD mem-
ory card, the navigation system restarts.
Ejecting an SD memory card
(for AVIC-X940BT)
1 Press the hbutton.
The touch panel keys for ejecting the media
appear.
2 Touch [Eject SD].
A message prompting you to remove the SD
memory card appears.
En
20
Chapter
02 Basic operation
3 Press the middle of the SD memory
card gently until it clicks.
4 Pull the SD memory card out straight.
When the data related to map data is
stored
pThis description is for AVIC-X940BT.
If data related to map data, such as custo-
mized POI data, is stored on the SD memory
card, operating procedures are slightly differ-
ent.
1 Press the hbutton and then touch
[Eject SD].
2 Touch [Yes].
The navigation system restarts, and a message
prompting you to remove the SD memory card
appears.
3 Eject the SD memory card while the
message is displayed.
Eject the SD memory card before touching
[OK].
4 Touch [OK].
The navigation system restarts.
Plugging and unplugging a
USB storage device
CAUTION
!To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
!Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on media
players, smart phones, or other devices while
using this product.
pThis navigation system may not achieve op-
timum performance with some USB sto-
rage devices.
pConnection via a USB hub is not possible.
En 21
Chapter
02
Basic operation
Basic operation
Plugging in a USB storage device
%Plug a USB storage device into the USB
and mini-jack connector.
USB and mini-jack connector
USB storage device
Unplugging a USB storage device
%Pull out the USB storage device after
checking that no data is being accessed.
Connecting and
disconnecting an iPod
CAUTION
!To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
!Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on media
players, smart phones, or other devices while
using this product.
Connecting your iPod
Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
pA USB interface cable for iPod (CD-IU51V)
(sold separately) is required for connection.
pFor details about iPod compatibility with
this navigation system, refer to the informa-
tion on our website.
pConnection via a USB hub is not possible.
1 Check that no USB storage device is
connected.
2 Connect your iPod.
USB and mini-jack con-
nector
USB interface cable for
iPod
Disconnecting your iPod
%Pull out the USB interface cable for iPod
after checking that no data is being ac-
cessed.
En
22
Chapter
02 Basic operation
Startup and termination
1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
pTo protect the LCD screen from damage, be
sure to touch the touch panel keys with
your finger only and gently touch the
screen.
2 Turn off the vehicle engine to termi-
nate the system.
The navigation system is also turned off.
On first-time startup
When you use the navigation system for the
first time, select the language that you want to
use.
1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
2 Touch the language that you want to
use on the screen.
3 Touch the language that you want to
use for the voice guidance.
The navigation system will now restart.
4 Read the disclaimer carefully, checking
its details, and then touch [OK] if you
agree to the conditions.
The map screen appears.
Regular startup
%Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
pThe screen shown will differ depending on
the previous conditions.
pWhen there is no route, the disclaimer ap-
pears after the navigation system reboots.
Read the disclaimer carefully, checking its
details, and then touch [OK] if you agree to
the conditions.
pIf the anti-theft function is activated, you
must enter your password.
Read the disclaimer carefully, checking its
details, and then touch [OK] if you agree to
the conditions.
En 23
Chapter
02
Basic operation
Basic operation
A message about the map
database
After you start using this navigation system, a
message related to map data may be dis-
played.
pThis message is displayed the first time you
turn on the navigation system each month.
pTouch the message to close it or it will dis-
appear automatically after eight sec-
onds.
Demonstration images
If you do not operate this navigation system
for two minutes, demonstration images are
displayed.
pThe demonstration images will not be dis-
played if you drive after mounting this navi-
gation system.
En
24
Chapter
02 Basic operation
En 25
Chapter
02
Basic operation
Basic operation
Screen switching overview
2
5
6
11
34
En
26
Chapter
03 How to use the navigation menu screens
What you can do on each
menu
1Top Menu
Press the HOME button to display the Top
Menuscreen.
This is the starting menu to access the desired
screens and operate the various functions.
There are two types of the Top Menuscreen.
Classic Menu
Shortcut Menu
pIn this manual, Classic Menu will be re-
ferred to as Top Menu.
2Destination Menu
You can search for your destination on this
menu. You can also check or cancel your set
route from this menu.
3Phone Menu
You can access the screen that is related to
hands-free phoning.
4AV operation screen
This is the screen that normally appears when
you play the AV source.
5Settings Menu
You can access the screen to customize set-
tings.
6Map screen
You can use this screen to check the current
vehicle position information and route to the
destination.
Shortcut Menu
Registering your favorite menu items in short-
cuts allows you to quickly jump to the regis-
tered menu screen by a simple touch on the
Shortcut Menu screen.
Selecting the shortcut
pUp to 15 menu items can be registered in
shortcuts.
1 Press the HOME button repeatedly to
display the Shortcut Menu screen.
pWhen you use the navigation system for the
first time or no items are set on shortcut, a
message will appear. Touch [Yes] to pro-
ceed to next step.
2 Touch [Shortcut].
The Shortcut selection screen appears.
3 Touch the tab on the right edge or scroll
the bar to display the icon that you want
to set to shortcut.
Scroll bar
4 Touch and hold the icon that you want
to add to shortcut.
En 27
Chapter
03
How to use the navigation menu screens
How to use the navigation menu screens
5 Move the icon to the left side of the
screen, and then release it.
The selected item is added to shortcut.
Removing a shortcut
1 Touch and hold the icon of the shortcut
you want to remove.
2 Move the icon to the right side of the
screen, and then release it.
Operating list screens (e.g.
POI list)
1
54
2
3
6
1Screen title
2
Touching or on the scroll bar scrolls
through the list and allows you to view the re-
maining items.
3
The previous screen returns.
4Listed items
Touching an item on the list allows you to nar-
row down the options and proceed to the next
operation.
5Number of possible choices
pIf there are 10 000 or more possible
choices, ****is displayed.
6
If all of the characters cannot be displayed
within the displayed area, touching the key to
the right of the item allows you to see remain-
ing characters.
Operating the on-screen
keyboard
1
4
3
5 76
28
1Screen title
The screen title appears.
2Text box
Displays the characters that are entered. If
there is no text in the box, an informative
guide with text appears.
3Keyboard
Touch the keys to enter the characters.
4
The previous screen returns.
5Keys
Switches the on-screen keyboard layout.
6Sym.,Others,0-9
You can enter other characters of alphabet.
You can also enter text with marks such as [&]
or [+] or numbers.
Touch to toggle the selection.
pEven if you use any of A,Ä,Å,Æ,
the displayed result is the same.
7OK
Confirms the entry and allows you to proceed
to the next step.
8
Deletes the input text one letter at a time, be-
ginning at the end of the text. Continuing to
touch the key deletes all of the text.
En
28
Chapter
03 How to use the navigation menu screens
Most of the information provided by your navigation system can be seen on the map. You need to be-
come familiar with how information appears on the map.
How to read the map screen
This example shows an example of a 2D map screen.
1
89 a
b
2
3
4c
e
d
5
7
6
f
g
pInformation with an asterisk (*) appears
only when the route is set.
pDepending on the conditions and settings,
some items may not be displayed.
1Name of the street to be used (or next gui-
dance point)*
2Next direction of travel*
As you get closer to the guidance point, the
color of the item changes to green.
pTouching this item enables you to hear
the next guidance again.
pYou can select between display and
non-display.
=For details, refer to Displaying man-
euvers on page 167.
3Distance to the guidance point*
Shows the distance to the next guidance
point.
pTouching this item enables you to hear
the next guidance again.
4Second maneuver arrow*
Shows the turning direction after next gui-
dance point and the distance to there.
=For details, refer to Displaying maneu-
vers on page 167.
5Map control
Touching displays touch panel keys for
changing the map scale and the map orienta-
tion.
6Current position
Indicates the current location of your vehicle.
The apex of the triangular mark indicates your
orientation and the display moves automati-
cally as you drive.
pThe apex of the triangular mark is the
proper current position of the vehicle.
7Eco-Meter
Displays a graph comparing the past average
fuel mileage and the average fuel mileage
since the navigation system was last started.
=For details, refer to Displaying the fuel
consumption information on page 168.
En 29
Chapter
04
How to use the map
How to use the map
8Street name (or city name) that your vehi-
cle is traveling along
=For details, refer to Setting the current
street name display on page 166.
9Extension tab for the AV information bar
Touching this tab opens the AV information
bar and enables you to briefly view the current
status on the AV source. Touching it again re-
tracts the bar.
aShortcut to the AV operation screen
The AV source currently selected is shown.
Touching the indicator displays the AV opera-
tion screen of the current source directly.
pDepending on the source currently cho-
sen, an image is displayed.
bQuick Access icon
Displays the Quick Accessmenu.
=For details, refer to Using shortcut
menus on the map on page 33.
cMap orientation indicator
!When North upis selected, is dis-
played.
!When Heading upis selected, is
displayed.
pThe red arrow indicates north.
=For details, refer to Switching the map or-
ientation on page 32.
dCurrent route*
The route currently set is highlighted in color
on the map. If a waypoint is set on the route,
the route after the next waypoint is high-
lighted in another color.
eDirection line*
The direction towards your destination (next
waypoint, or the position of a cursor) is indi-
cated with a straight line.
fMulti-Info window
Each touch of Multi-Info window changes the
display information as follows.
!Distance to the destination (or dis-
tance to waypoint)*
!Estimated time of arrival at your des-
tination or waypoint*
The estimated time of arrival is an ideal
value calculated based on the value set
for Average Speedand the actual
driving speed. The estimated time of ar-
rival is only a reference value, and does
not guarantee arrival at that time.
!Travel time to your destination or
waypoint*
gCurrent time
Meaning of guidance flags
Destination
The checkered flag indicates your
destination.
Waypoint
The blue flags indicate your way-
points.
Guidance point
The next guidance point (next turn-
ing point, etc.) is shown by a yel-
low flag.
Enlarged map of the intersection
When Close Up Viewin the Map Settings
screen is On, an enlarged map of the inter-
section appears.
=For details, refer to Setting the auto-zoom
display on page 165.
En
30
Chapter
04 How to use the map
Display during freeway driving
In certain locations of the freeway, lane infor-
mation is available. The map indicates the re-
commended lane to be in to easily maneuver
the next guidance.
1
While driving on the freeway, freeway exit
numbers and freeway signs may be displayed
in the vicinity of interchanges and exits.
2 3
1Lane information
2Freeway exit information
Displays the freeway exit.
3Freeway signs
These show the road number and give direc-
tional information.
pIf the data for these items is not contained
in the built-in memory, the information is
not available even if there are the signs on
the actual road.
Types of the road stored in
the map database
Roads included in the route guidance
Turn by turn routable roads contain full attri-
bute data and can be used for full route gui-
dance. Pioneer navigation will display full
route guidance, including turn-by-turn voice
directions and arrow icons.
Roads without turn-by-turn
instructions
Routable roads (the route displayed and high-
lighted in violet) have only basic data and can
only be used to plot a navigable route. Pioneer
Navigation will only display a navigable route
on the map (only the arrival guidance for the
destination or a waypoint is available). Please
review and obey all local traffic rules along the
highlighted route for your safety.
No turn-by-turn directions will be displayed on
these roads.
Non routable roads (pink color road)
Map display is possible, but it cannot be used
for route calculation. Please review and obey
all local traffic rules along this route. (For your
safety.)
Operating the map screen
Changing the scale of the map
You can change the map scale between 25
yards and 1 000 miles (25 meters and 2 000
kilometers).
1 Display the map screen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch on the map screen.
and with the map scale appear.
3 Touch or to change the map
scale.
pIf you do not operate the function for a few
seconds, the touch panel keys for map dis-
play control disappear.
#If you touch the direct scale key, the map is
changed to the selected scale directly.
En 31
Chapter
04
How to use the map
How to use the map
Switching the map orientation
You can switch how the map shows your vehi-
cles direction between Heading upand
North up.
!Heading up:
The map display always shows the vehicles
direction as proceeding toward the top of
the screen.
!North up:
The map display always has north at the
top of the screen.
pThe map orientation is fixed at North up
when the map scale is 25 miles (50 kilo-
meters) or more.
pThe map orientation is fixed at Heading
upwhen the 3D map screen is displayed.
1 Display the map screen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch on the map screen.
or appears.
3 Touch or to switch the vehicles
direction.
Each time you touch the key changes the set-
ting.
pIf you do not operate the function for a few
seconds, the touch panel keys for map dis-
play control disappear.
Scrolling the map to the
position you want to see
1 Display the map screen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch and drag the map in the desired
direction to scroll.
2
1
1Cursor
2Distance from the current position
Positioning the cursor to the desired location
results displaying in a brief informational over-
view about the location at the bottom of
screen, with the street name and other infor-
mation for this location. (The information
shown varies depending on the position.)
pThe scrolling increment depends on your
dragging length.
#If you touch , the map returns to the cur-
rent position.
pPressing MODE button returns the map to
the current position.
Viewing information about a
specified location
An icon appears at registered places (home lo-
cation, specific places, Favorites entries) and
places where there is a POI icon or traffic in-
formation icon. Place the scroll cursor over
the icon to view detailed information.
1 Scroll the map and move the scroll cur-
sor to the icon you want to view.
2 Touch .
The Information Listscreen appears.
En
32
Chapter
04 How to use the map
3 Touch the item that you want to check
the detailed information.
Information for a specified location appears.
The information shown varies according to the
location. (There may be no information for that
location.)
=For details, refer to Setting the display of
icons of favorite locations on page 167.
=For details, refer to Displaying POI on the
map on page 168.
=For details, refer to How to read traffic infor-
mation on the map on page 55.
pTouching [Call] enables you to call the posi-
tion if a telephone number is available.
(Pairing with cellular phone featuring
Bluetooth wireless technology is required.)
=For details, refer to Dialing from the map
on page 67.
Using shortcut menus on the map
Quick Accessmenu allows you to perform
various tasks, such as route calculation for the
location indicated by the cursor or registering
a location in Favorites, faster than using the
navigation menu.
You can customize Quick Accessdisplayed
on screen. The Quick Accessdescribed here
are prepared as the default setting.
=For details, refer to Selecting the Quick Ac-
cessmenu on page 170.
pItems marked with an asterisk (*) cannot
be removed from the Quick Access
menu.
%When the map is displayed, touch .
Quick Access menu
:Route Options*
Displayed when the map is not scrolled. This
item can be selected only during route gui-
dance.
You can modify the conditions for route calcu-
lation and recalculate the current route.
=For details, refer to Modifying the route cal-
culation conditions on page 46.
:Destination*
Displayed when the map is scrolled. Set the
route to the place specified with the cursor.
:Registration
Register information on the location indicated
by the cursor to Favorites.
=For details, refer to Registering a location by
scroll mode on page 50.
:Vicinity Search
Find POIs (Points Of Interest) in the vicinity of
the cursor.
=For details, refer to Searching for a nearby
POI on page 41.
:Overlay POI
Displays icons for surrounding facilities (POI)
on the map.
=For details, refer to Displaying POI on the
map on page 168.
:Volume
Displays the Volume Settingsscreen.
=For details, refer to Setting the Volume for
Guidance and Phone on page 173.
:Contacts
Displays the Contacts Listscreen.
=For details, refer to Calling a number in the
phone book on page 65.
Close
Hides the Quick Accessmenu.
En 33
Chapter
04
How to use the map
How to use the map
Switching the view mode
Various types of screen displays can be se-
lected for navigation guidance.
1 Display the Map Settingsscreen.
=For details, refer to Displaying the screen for
map settings on page 164.
2 Touch [View Mode].
The View Modescreen appears.
3 Touch the type that you want to set.
You can select the following types:
!2D View (default):
Displays a normal map (2D map).
!3D View:
Displays a map with an antenna view (3D
map).
!Street View:
Information on the next four guidance
points closest to the current location ap-
pear in order from top to bottom on the left
side of the screen.
The following information is displayed.
Name of the next route to be taken by
the vehicle
Arrow indicating the direction of the ve-
hicle
Distance to the guidance points
pThis mode is available when the route is
set.
!Rear View:
Displays the rear view image on the left
side of the screen and the map on the right
side of the screen.
pThis mode is available when the rear
view camera setting is set to On.
=For details, refer to Setting for rear view
camera on page 175.
!Eco Graph:
Displays a graph for eco-driving on the left
side of the screen and the map on the right
side of the screen.
=For details, refer to Checking the eco-
friendly driving status on the next
page.
En
34
Chapter
04 How to use the map
This navigation system is equipped with eco-
friendly driving functions that can be used to
estimate whether you are driving in an envir-
onmentally friendly way.
This chapter describes these functions.
!The fuel mileage calculated is based on a
theoretical value determined from vehicle
speed and position information from the
navigation system. The fuel mileage dis-
played is only a reference value, and does
not guarantee the mileage displayed can be
obtained.
!The eco-friendly driving functions are an es-
timate of the real time fuel consumption to
average fuel consumption ratio and is not
an actual value.
!The eco-friendly driving functions and cal-
culations take into consideration the loca-
tion of the GPS position and speed of the
vehicle in determining a value.
Checking the eco-friendly
driving status
This function estimates approximate fuel mile-
age based on your driving, compares that with
your average fuel mileage in the past, and dis-
plays the results in a graph.
The graph appears when the map display is
set to Eco Graph.
1 Display the Map Settingsscreen.
=For details, refer to Displaying the screen for
map settings on page 164.
2 Touch [View Mode].
The View Modescreen appears.
3 Touch [Eco Graph].
The Eco Graphscreen appears.
2
4
3
1
1Eco Score
The result of the comparison of your past
average fuel mileage and current average
fuel mileage appears as a value from
0.0 Pts (points) to 10.0 Pts. The higher the
value, the better the fuel mileage when
compared to past route guidance.
The green gauge indicates the current
score, and the gray gauge indicates the
best score to date.
The Eco Scoreis updated every 5 min-
utes.
pThis is not displayed when Eco Score
is set to Offor when no route is set.
2Best Score
Displays the best score to date.
pThis is not displayed when Eco Score
is set to Offor when no route is set.
3Average fuel mileage comparison graph
Displays a comparison of the average fuel
mileage up to the point the navigation sys-
tem was last stopped (past average fuel
mileage) and the current average fuel mile-
age. The display is updated every 3 sec-
onds. The more the value moves in the
direction of +, the better the fuel mileage.
There are three different graph bars.
!Total
A comparison of the past average fuel
mileage and the average fuel mileage of
the current drive.
!:Ordinary Road
A comparison of the past average fuel
mileage and the average fuel mileage
for 90 seconds in the past, while the ve-
hicle is driving on an ordinary road.
!:Freeway
A comparison of the past average fuel
mileage and the average fuel mileage
for 90 seconds in the past, while the ve-
hicle is driving on a freeway.
En 35
Chapter
05
Eco-friendly driving functions
Eco-friendly driving functions
4Animal icons
The number of displayed animal icons in-
creases or decreases according to the value
of Eco Score.
pThis is not displayed when Eco Score
is set to Offor when no route is set.
pEven if you use the Eco Graphfunction
immediately after you start using the navi-
gation system for the first time, may be
displayed and the function may not be avail-
able.
=For details, refer to Troubleshooting on page
200.
pThe display settings can be changed.
=For details, refer to Changing the eco-func-
tion setting on page 163.
Displaying Eco Drive Level
guidance
This navigation system is equipped with the
Eco Drive Levelfunction that estimates how
well you have driven in an environmentally
friendly way.
The points of Eco Drive Levelchange ac-
cording to Eco Scorewhen the vehicle
reaches the destination. When a certain num-
ber of points is reached, the level increases
and a message appears.
Tree icon
As the level increases, a tree icon changes
from a young tree to a big tree.
pThis is not displayed when Eco Drive
Levelis set to Off.
=For details of the operation, refer to Chan-
ging the eco-function setting on page
163.
Sudden start alert
If the speed of the vehicle exceeds 25.5 mph
(41 km/h) within 5 seconds from the time it is
started, a message appears and a warning
sound beeps.
=For details of the operation, refer to Chan-
ging the eco-function setting on page
163.
En
36
Chapter
05 Eco-friendly driving functions
CAUTION
For safety reasons, these route-setting functions
are not available while your vehicle is in motion.
To enable these functions, you must stop in a
safe place and put on the parking brake before
setting your route.
pSome information regarding traffic regula-
tions depends on the time when the route
calculation is performed. Thus, the infor-
mation may not correspond with a certain
traffic regulation when your vehicle actually
passes through the location in question.
Also, the information on the traffic regula-
tions provided will be for a passenger vehi-
cle, and not for a truck or other delivery
vehicles. Always follow the actual traffic
regulations when driving.
The basic flow of creating
your route
1Park your vehicle in a safe place and apply
the parking brake.
j
2Display the Destination Menuscreen.
=For details of the operations, refer to
Screen switching overview on page 26.
j
3Select the method of searching for your
destination.
j
4Enter the information about your destina-
tion to calculate route.
j
5Confirm the location on the map.
=For details, refer to Setting a route to
your destination on page 45.
j
6The navigation system calculates the route
to your destination, and then shows the
route on the map.
j
7Check and decide the route.
=For details, refer to Setting a route to
your destination on page 45.
j
8Your navigation system sets the route to
your destination, and the map of your sur-
roundings appears.
j
9Release the parking brake, drive in accor-
dance with navigation guidance.
En 37
Chapter
06
Searching for and selecting a location
Searching for and selecting a location
Searching for a location by
address
The most frequently used function is Ad-
dress, in which the address is specified and
the destination is searched.
You can select the method of searching for a
location by address.
!Searching for a city name first
!Finding the location by specifying the
house number
Searching for a city name first
pDepending on the search results, some
steps may be skipped.
pWhen you enter characters, the system will
automatically search the database for all
possible options. Only the characters you
enter are active.
pIf the search candidates number reaches
20 or less, the screen automatically
changes to the search result screen.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Address].
3 Touch the key next to Countryto se-
lect the country.
If the destination is in another country, change
the country setting.
pOnce the country has been selected, you
only have to change countries when your
destination is outside of the country you se-
lected.
4 Touch the key next to Stateand
touch the desired state, province, or terri-
tory on the list.
If the location that you want to search for is in
another state, province, or territory, this
changes the area setting.
pOnce the state, province, or territory has
been selected, you only have to change
states, provinces, or territories when your
destination is outside of the state, province,
or territory you selected.
5 Touch [City].
#If you touch [History], the City History List
screen appears, enabling you to search by pre-
viously selected city history.
=For details, refer to Searching by selected
city history on page 40.
6 Enter the city name and then touch
[OK].
The Select Cityscreen appears.
7 Touch the desired city name.
The Street Namescreen appears.
#If you touch , the geographic center of the
city appears on the map screen.
En
38
Chapter
06 Searching for and selecting a location
8 Enter the street name and then touch
[OK].
The Street Selectionscreen appears.
9 Touch the street you want.
10 Enter the house number and then
touch [OK].
The House Number Selectionscreen ap-
pears.
#If you touch [OK] without entering the house
number, a representative location on the street in
the selected city appears.
11 Touch the desired house number range.
The searched location appears on the map
screen.
=For the subsequent operations, refer to Set-
ting a route to your destination on page 45.
Finding the location by
specifying the house number
pDepending on the search results, some
steps may be skipped.
pWhen you enter characters, the system will
automatically search the database for all
possible options. Only the characters you
enter are active.
pIf the search candidates number reaches
20 or less, the screen automatically
changes to the search result screen.
1 Display the Address Searchscreen.
2 Touch [House#].
The Enter House Numberscreen appears.
3 Enter the house number and then
touch [OK].
The Enter Street Namescreen appears.
4 Enter the street name and then touch
[OK].
The Street Selectionscreen appears.
5 Touch the street you want.
The Enter City Namescreen appears.
6 Enter the city name and then touch
[OK].
The Select Cityscreen appears.
En 39
Chapter
06
Searching for and selecting a location
Searching for and selecting a location
7 Touch the desired city name.
The House Number Selectionscreen ap-
pears.
If the house number you have entered is not
found, a message appears. In that case, all
house number ranges are listed after touching
[Yes].
#If you touch , the geographic center of the
city appears on the map screen.
8 Touch the desired house number range.
The searched location appears on the map
screen.
=For the subsequent operations, refer to Set-
ting a route to your destination on page 45.
Searching by selected city history
You can search the cities from the history that
you have searched by entering the name with
the keyboard and selected by Address,POI
or Favorites.
pThe history can store up to 50 cities.
pThe cities are listed in order of the most re-
cent search.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Address].
The Address Searchscreen appears.
3 Touch [History].
The City History Listscreen appears.
4 Touch the desired city name.
The Street Namescreen appears.
#If you touch , the geographic center of the
city appears on the map screen.
5 Enter the street name and then touch
[OK].
The Street Selectionscreen appears.
6 Touch the street you want.
The Enter House Numberscreen appears.
pIf the selected street has only one matching
location, the searched location appears on
the map screen.
7 Enter the house number and then
touch [OK].
The House Number Selectionscreen ap-
pears.
#If you touch [OK] without entering the house
number, a representative location on the street in
the selected city appears.
8 Touch the desired house number range.
The searched location appears on the map
screen.
=For the subsequent operations, refer to Set-
ting a route to your destination on page
45.
Setting up a route to your
home
If your home location is stored, the route to
your home can be calculated by touching a
single key.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Return Home].
pIf you have not registered your home loca-
tion, a message appears. Touch [Register]
to start registration.
=For details, refer to Registering your
home on page 163.
Searching for Points of
Interest (POI)
Information about various facilities (Points Of
Interest POI), such as gas stations, parking
lots or restaurants, is available. You can
search for a POI by selecting the category (or
entering the POI Name).
En
40
Chapter
06 Searching for and selecting a location
Searching for POIs by preset
categories
You can search for POIs with a single touch
from the preset category.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [POI].
3 Touch the desired category.
Preset categories
The POI Listscreen appears.
4 Touch the POI you want.
The searched location appears on the map
screen.
=For the subsequent operations, refer to Set-
ting a route to your destination on page 45.
Searching for a POI directly
from the name of the facilities
pIf the search candidates number reaches
20 or less, the screen automatically
changes to the search result screen.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [POI].
The POI Searchscreen appears.
3 Touch [Spell Name].
4 Enter the POI name and then touch
[OK].
The POI Listscreen appears.
#If you change the region to search, touch the
state code key and display the State Listscreen
to change the setting.
State code key
If the destination is in another country, touch
[Country] to change the country setting when
the State Listscreen is displayed.
pOnce the region has been selected, you
only have to change it when your destina-
tion is outside of the region you selected.
5 Touch the POI you want.
The searched location appears on the map
screen.
#If you touch [Sort], the order of POI can be
sorted.
pCurrent order is indicated on the upper
right of the screen.
!:
Sorts the items in the list in order by dis-
tance from the vehicle position.
!:
Sorts the items in the list in order by degree
of consistency with the entered text.
!:
Sorts the items in the list alphabetically.
=For the subsequent operations, refer to Set-
ting a route to your destination on page 45.
Searching for a nearby POI
You can search for POIs in your surroundings.
pUp to 300 POIs within a 100 miles (160 kilo-
meters) radius of the vehicle position are
listed in order by distance.
En 41
Chapter
06
Searching for and selecting a location
Searching for and selecting a location
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [POI].
The POI Searchscreen appears.
3 Touch [Near Me].
POIs are divided into several categories.
4 Touch the category you want.
The POI Listscreen appears.
pIf there are more detailed categories within
the selected category, repeat this step as
many times as necessary.
5 Touch the POI you want.
The searched location appears on the map
screen.
=For the subsequent operations, refer to Set-
ting a route to your destination on page 45.
Searching for POIs around the
destination
pThis function is available when the route is
set.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [POI].
The POI Searchscreen appears.
3 Touch [Near Destination].
POIs are divided into several categories.
4 Touch the category you want.
The POI Listscreen appears.
pIf there are more detailed categories within
the selected category, repeat this step as
many times as necessary.
5 Touch the POI you want.
The searched location appears on the map
screen.
=For the subsequent operations, refer to Set-
ting a route to your destination on page 45.
Searching for POIs around the city
You can search for POIs around a specified
city.
pIf the search candidates number reaches
20 or less, the screen automatically
changes to the search result screen.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [POI].
The POI Searchscreen appears.
3 Touch [Around City].
4 Enter the city name and then touch
[OK].
The Select Cityscreen appears.
#If you change the region to search, touch the
state code key and display the State Listscreen
to change the setting.
State code key
If the destination is in another country, touch
[Country] to change the country setting when
the State Listscreen is displayed.
pOnce the region has been selected, you
only have to change it when your destina-
tion is outside of the region you selected.
#If you touch [History], the City History List
screen appears, enabling you to search by pre-
viously selected city history.
=For details, refer to Searching by selected
city history on page 40.
5 Touch the desired city name.
POIs are divided into several categories.
#If you touch , the geographic center of the
city appears on the map screen.
En
42
Chapter
06 Searching for and selecting a location
6 Touch the category you want.
The POI Listscreen appears.
pIf there are more detailed categories within
the selected category, repeat this step as
many times as necessary.
7 Touch the POI you want.
The searched location appears on the map
screen.
=For the subsequent operations, refer to Set-
ting a route to your destination on page 45.
How to read the POI Listscreen
The following information is displayed on the
POI Listscreen.
12 3
1Facility name
2Facility address
3Distance from the position that the search
starts
pIf you touch , detailed information of the
facility appears.
Selecting destination from
Favorites
Storing locations you visit frequently saves
time and effort.
Selecting an item from the list provides an
easy way to specify the position.
pThis function is not available if no locations
have been registered in Favorites.
=For details, refer to Storing favorite locations
on page 50.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Favorites].
3 Touch the entry you want.
The searched location appears on the map
screen.
=For the subsequent operations, refer to Set-
ting a route to your destination on page
45.
Searching for POIs by using
the data on the SD memory
card
Creating a customized POI is possible by
using the utility program AVIC FEEDS which is
available separately, on your PC. (AVIC FEEDS
will be available on our website.) Storing the
customized POI properly and inserting the SD
memory card enables the system to use the
data for searches.
1 Store the item into the SD memory card
by using the AVIC FEEDS.
2 Insert an SD memory card into the SD
card slot.
=For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 18.
3 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
En 43
Chapter
06
Searching for and selecting a location
Searching for and selecting a location
4 Touch [AVIC FEEDS].
The Select POIscreen appears.
5 Touch the item you want.
6 Touch the POI you want.
The searched location appears on the map
screen.
=For the subsequent operations, refer to Set-
ting a route to your destination on the next
page.
Selecting a location you
searched for recently
The places that you have set as destination or
waypoint in the past are automatically stored
in History.
pIf no location is stored in Destination His-
tory, you cannot select [History]. (If you
perform a route calculation, you can select
[History].)
pHistorycan store up to 100 locations. If
the entries reach the maximum, the new
entry overwrites the oldest one.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [History].
3 Touch the entry you want.
The searched location appears on the map
screen.
=For the subsequent operations, refer to Set-
ting a route to your destination on the next
page.
Searching for a location by
coordinates
Entering a latitude and longitude pinpoints
the location.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Coordinates].
3 Touch [East] or [West], and then enter
the longitude.
To enter W 50°12.5for example, touch
[West], [0], [5], [0], [0], [1], [0], [2], and [5].
4 Touch [North] or [South], and then
enter the latitude.
To enter N 5°12.5for example, touch [North],
[0], [5], [0], [1], [0], [2], and [5].
5 Touch [OK].
The searched location appears on the map
screen.
=For the subsequent operations, refer to Set-
ting a route to your destination on the next
page.
En
44
Chapter
06 Searching for and selecting a location
Setting a route to your
destination
1 Search for a location.
=For details, refer to Chapter 6.
After searching for the destination, the Loca-
tion confirmation screen appears.
2 Touch [OK].
Location confirmation screen
The destination is set, and then route calcula-
tion starts.
When the route calculation is completed,
Route confirmation screen appears.
#If you press the MODE button during route
calculation, the calculation is canceled and the
map screen appears.
#If you touch [Scroll], the map display is chan-
ged to the scroll mode. In the scroll mode, you
can display the location more precisely to register
it, or make settings.
#If you touch [Waypoint], the location is added
to the Waypoints Listscreen.
pIf a destination is not set, [Waypoint] is not
available.
3 Touch [OK].
Route confirmation screen
123 4
Sets the displayed route as your route, and
starts the route guidance.
1Travel time to your destination
2Distance to the destination
3Estimated fuel cost to your destination
=For details, refer to Inputting the fuel
consumption information for calculating
the fuel cost on page 160.
4Route calculation condition
#If you touch , the message confirming
whether to cancel the calculated route appears.
If you touch [Yes], the calculated route is can-
celed and the map screen appears.
2
3
1
4
1Multiple Route
=For details, refer to Displaying multiple
routes on this page.
2Options
=For details, refer to Modifying the route
calculation conditions on the next page.
3Profile
=For details, refer to Checking the current
itinerary on page 47.
4Waypoints
=For details, refer to Editing waypoints on
page 48.
Displaying multiple routes
You can select a desired route from multiple
route options. Calculated routes are shown in
different colors.
pIf you set waypoints, you cannot display
multiple routes.
1 Touch [Multiple Route] on the Route
confirmation screen.
Multiple route options appear.
2 Touch to .
Another route is displayed.
3 Touch [OK].
Route confirmation screen appears.
En 45
Chapter
07
After the location is decided
After the location is decided
Displaying the route overview
pRoute Overviewis active only when the
route is set.
1 Press the HOME button to display the
Top Menuscreen.
2 Touch [Destination].
The Destination Menuscreen appears.
3 Touch [Route Overview].
2
3
1
1Options
=For details, refer to Modifying the route
calculation conditions on this page.
2Profile
=For details, refer to Checking the current
itinerary on the next page.
3Waypoints
=For details, refer to Editing waypoints on
page 48.
4 Touch [OK].
Modifying the route
calculation conditions
You can modify the conditions for route calcu-
lation and recalculate the current route.
1 Display the Route Overviewscreen.
=For details, refer to Displaying the route
overview on this page.
2 Touch [Options].
3 Touch the desired items to change the
route calculation conditions and then
touch [OK].
The route is recalculated, and the Route con-
firmation screen appears.
Items that users can operate
Settings marked with an asterisk (*) show that
these are default or factory settings.
Route Condition
This setting controls how the route should be
calculated by taking into account the time, dis-
tance or main road.
Determines which condition takes priority for
route calculation.
Fast*:
Calculates a route with the shortest travel time
to your destination as a priority.
Short:
Calculates a route with the shortest distance
to your destination as a priority.
Main Road:
Calculates a route that passes major arterial
roads as a priority.
En
46
Chapter
08 Checking and modifying the current route
Avoid Toll Road
This setting controls whether toll roads (in-
cluding toll areas) should be taken into ac-
count.
Off*:
Calculates a route that may include toll roads
(including toll areas).
On:
Calculates a route that avoids toll roads (in-
cluding toll areas).
pThe system may calculate a route that in-
cludes toll roads even if Onis selected.
Avoid Ferry
This setting controls whether ferry crossings
should be taken into account.
Off*:
Calculates a route that may include ferries.
On:
Calculates a route that avoids ferries.
pThe system may calculate a route that in-
cludes ferries even if Onis selected.
Avoid Freeway
This setting controls whether freeways may be
included in the route calculation.
Off*:
Calculates a route that may include freeways.
On:
Calculates a route that avoids freeways.
pThe system may calculate a route that in-
cludes freeways even if Onis selected.
Time restrictions
This setting controls whether streets or
bridges that have traffic restrictions during a
certain time should be taken into account.
pIf you want to set your route to avoid raised
draw bridges, select On.
On*:
Calculates a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
Off:
Calculates a route while ignoring traffic re-
strictions.
pThe system may calculate a route that in-
cludes streets or bridges that are subject to
traffic restrictions during a certain time
even if Onis selected.
CAUTION
If the time difference is not set correctly, the navi-
gation system cannot consider traffic regulations
correctly. Set the time difference correctly.
=For details, refer to Setting the time difference
on page 172.
Learning Route
The system learns the travel history of your ve-
hicle for each road.
This setting controls whether or not the travel
history should be taken into account.
On*:
Calculates a route with the travel history taken
into account.
Off:
Calculates a route without the travel history
taken into account.
Clear:
Clears the current travel history.
Checking the current itinerary
You can check the route details.
1 Display the Route Overviewscreen.
=For details, refer to Displaying the route
overview on the previous page.
2 Touch [Profile].
The Route Profilescreen appears.
En 47
Chapter
08
Checking and modifying the current route
Checking and modifying the current route
Editing waypoints
You can edit waypoints (locations you want to
visit on the way to your destination) and recal-
culate the route so that it passes through
these locations.
Adding a waypoint
Up to 5 waypoints can be set, and waypoints
and final destination can be sorted automati-
cally or manually.
1 Display the Route Overviewscreen.
=For details, refer to Displaying the route
overview on page 46.
2 Touch [Waypoints].
The Waypoints Listscreen appears.
3 Touch [Add].
The Select Search methodscreen appears.
4 Search for a location.
=For details, refer to Chapter 6.
5 Touch [OK].
6 Touch [OK] on the Waypoints List
screen.
The route is recalculated, and the Route con-
firmation screen appears.
pIf you set waypoints, you cannot display
multiple routes.
Deleting a waypoint
You can delete waypoints from the route and
then recalculate the route. (You can delete
successive waypoints.)
1 Display the Route Overviewscreen.
=For details, refer to Displaying the route
overview on page 46.
2 Touch [Waypoints].
The Waypoints Listscreen appears.
3 Touch [Delete] next to the waypoint
that you want to delete.
The touched waypoint will be deleted from the
list.
4 Touch [OK] on the Waypoints List
screen.
The route is recalculated, and the Route con-
firmation screen appears.
5 Touch [OK].
The map of the current position appears.
En
48
Chapter
08 Checking and modifying the current route
Sorting waypoints
You can sort waypoints and recalculate the
route.
pYou cannot sort waypoints that you have al-
ready passed.
1 Display the Route Overviewscreen.
=For details, refer to Displaying the route
overview on page 46.
2 Touch [Waypoints].
The Waypoints Listscreen appears.
3 Touch [Sort].
The Sort Waypointsscreen appears.
4 Touch the waypoint or destination.
Put them in the desired order.
#If you touch [Automatic], the destination and
waypoints are sorted in the order of a nearest
waypoint from the current location in the direct
antenna path.
#If you touch [Clear], waypoint sort is canceled.
5 Touch [OK].
The Waypoints Listscreen appears.
6 Touch [OK] on the Waypoints List
screen.
The route is recalculated, and the Route con-
firmation screen appears.
7 Touch [OK].
The map of the current position appears.
Canceling the route guidance
If you no longer need to travel to your destina-
tion, follow the steps below to cancel the route
guidance.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Cancel Route].
A message confirming the cancellation of the
current route appears.
3 Touch [Yes].
The current route is deleted, and a map of
your surroundings reappears.
#If you touch [Skip], the next waypoint is
skipped and a new route is calculated. All other
waypoints remain.
When the route calculation is completed, Route
confirmation screen appears.
p[Skip] is available only when a waypoint is
set.
#If you touch [No], the previous screen returns
without deleting the route.
En 49
Chapter
08
Checking and modifying the current route
Checking and modifying the current route
Storing favorite locations
Storing your favorite locations as Favorites
provides you with the opportunity to save the
time and effort of re-entering this information.
Stored items can be made available on Fa-
voriteslater.
Registering a location by
Favorites
Favoritescan store up to 400 locations.
Home location is counted as one of the items
in Favorites.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Favorites].
The Favoritesscreen appears.
3 Touch [Add].
The Select Search methodscreen appears.
4 Search for a location.
=For details about the search methods, refer
to Chapter 6.
5 When the map of the location you
want to register is displayed, touch [OK].
The location is registered, and then the Edit
Favoritescreen appears.
=For details, refer to Editing the favorite loca-
tion in the list on this page.
6 Touch [OK].
The registration is complete.
Registering a location by scroll
mode
pThis function is available when Registra-
tionis set in the Quick Accessmenu.
=For details, refer to Selecting the Quick
Accessmenu on page 170.
1 Touch and drag the screen to scroll the
map to the position that you want to regis-
ter.
2 Touch to display the Quick Access
menu.
3 Touch .
The location is registered, and then the Edit
Favoritescreen appears.
=For details, refer to Editing the favorite loca-
tion in the list on this page.
4 Touch [OK].
The registration is complete.
Editing registered locations
Editing the favorite location in
the list
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Favorites].
The Favoritesscreen appears.
3 Touch next to the location that you
want to edit.
The Edit Favoritescreen appears.
4 Touch the item that you want to
change the setting.
2
3
1
4
En
50
Chapter
09 Registering and editing locations
1Name
You can enter the desired name.
pUp to 17 characters can be input for the
name.
2Phone#
You can edit the registered phone number.
To dial the number, touch [Call].
The maximum digits you can enter for the
phone number is 15.
3Icon
You can change the symbol displayed on
the map and Favorites.
4Modify Location
You can change the registered location by
scrolling the map.
5 Touch [OK].
The registration is complete.
Editing your home
When you have already registered your home,
you can edit the information of your home.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Favorites].
pHome location is displayed on the top of
the list.
3 Touch next to the home location.
The Edit Favoritescreen appears.
4 Touch the item that you want to
change the setting.
1
2
1Phone#
To dial the number, touch [Call].
2Modify Location
You can change the registered location by
scrolling the map.
pFor home information, [Name] and [Icon]
are not editable.
5 Touch [OK].
The registration is complete.
Sorting the favorite locations
in the list
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Favorites].
The Favoritesscreen appears.
3 Touch [Sort].
Each time you touch [Sort] changes the sort
order.
pCurrent order is indicated on the upper
right of the screen.
!:
Sorts the items in the list in order of the re-
cently used items.
!:
Sorts the items in the list alphabetically.
!:
Sorts the items in the list in order by dis-
tance from the vehicle position.
En 51
Chapter
09
Registering and editing locations
Registering and editing locations
Deleting a favorite location
from the list
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Favorites].
The Favoritesscreen appears.
3 Touch [Delete].
4 Select the location you want to delete.
A check mark appears next to the selected lo-
cation.
#If you touch [All], you can select all entries. If
you want to deselect all entries, touch [None].
5 Touch [Delete].
A message will appear asking you to confirm
the deletion.
6 Touch [Yes].
The data you selected is deleted.
#If you touch [No], the deletion is canceled.
Exporting and importing
favorite locations
Exporting favorite locations
You can export the Favoritesdata to an SD
memory card for editing by using the utility
program AVIC FEEDS which is available sepa-
rately, on your PC.
pIf there is previous data in the SD memory
card, the data is overwritten with new data.
1 Insert an SD memory card into the SD
card slot.
=For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 18.
2 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
3 Touch [Favorites].
The Favoritesscreen appears.
4 Touch .
Data export starts.
After the data is exported, the completion mes-
sage appears.
5 Touch [OK].
The Favoritesscreen appears.
Importing favorite locations
You can import the locations that you have edi-
ted on the utility program AVIC FEEDS to Fa-
vorites.
pWhen a location that is already registered
in Favoritesis imported, the location is
overwritten.
1 Store the item into the SD memory card
by using the AVIC FEEDS.
En
52
Chapter
09 Registering and editing locations
2 Insert an SD memory card into the SD
card slot.
=For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 18.
3 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
4 Touch [Favorites].
The Favoritesscreen appears.
5 Touch .
The message confirming whether to replace
the stored items appears.
6 Touch [Yes].
Data import starts.
After importing the data is finished, the Fa-
voritesscreen appears.
Deleting the destination
history from the list
Items in Historycan be deleted. All entries
in Historycan be deleted at once.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [History].
The Destination History Listscreen ap-
pears.
3 Touch [Delete].
The Delete from Historyscreen appears.
4 Select the location you want to delete.
A check mark appears next to the selected lo-
cation.
#If you touch [All], you can select all entries. If
you want to deselect all entries, touch [None].
5 Touch [Delete].
A message will appear asking you to confirm
the deletion.
6 Touch [Yes].
The data you selected is deleted.
#If you touch [No], the deletion is canceled.
En 53
Chapter
09
Registering and editing locations
Registering and editing locations
pPlease note that use of the traffic informa-
tion function on AVIC-X940BT will require
that a separately sold Traffic tuner (ND-
TMC10) be connected.
You can check real-time traffic information
transmitted by the Traffic Management Chan-
nel (TMC) of the receive data services (RDS)
on the screen. Such traffic information is up-
dated periodically. When the navigation sys-
tem receives updated traffic information, the
navigation system will overlay the traffic infor-
mation on your map and also display detailed
text information when available. When you are
traveling along a route and there is traffic in-
formation on your current route, the system
will detect it and ask you if you would like to
be rerouted, or suggest another route automa-
tically.
pWhen used in North America, this product
receives traffic information provided by
Clear Channel Broadcasting, Inc.
©Clear Channel Broadcasting, Inc.
pThe system acquires the traffic information
up to 100 miles in radius from the vehicle
position. (If there is a lot of traffic informa-
tion around your vehicle, the radius will be
shorter than 100 miles.)
pThe navigation system provides the follow-
ing functions by using the information
from RDS-TMC service:
!Displaying a list of traffic information
!Displaying traffic information on a map
!Suggesting a route to avoid traffic con-
gestion by using traffic information
pThe term traffic congestionin this section
indicates the following types of traffic infor-
mation: stop and go, stopped traffic,
closed/blocked roads. This information is
always taken into consideration when
checking your route, and the information
related with these events cannot be turned
off. If you select other traffic information in
Traffic Settings, the information can be
displayed in a list or on a map.
=For details, refer to Selecting traffic infor-
mation to display on page 58.
Checking all traffic
information
Traffic information except traffic flow informa-
tion is listed on screen. This allows you to
check how many traffic incidents have oc-
curred, their location and their distance from
your current position.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Traffic].
The Traffic Menuscreen appears.
3 Touch [Traffic Events].
The Traffic Event Listscreen appears.
The list with received traffic information is
shown.
4 Select an incident you want to view in
detail.
The details of the selected incident are dis-
played.
pTouching an incident you want to see allows
you to view the detailed information of the
incident. If the information cannot be dis-
played on one screen, touch or to view
the remaining information.
pTouching allows you to check the loca-
tion on a map. (Traffic information without
positional information cannot be checked
on a map.)
#If you touch [Sort], the traffic information can
be sorted.
Each time you touch the key changes the setting.
!:
You can sort the traffic information by dis-
tance from your current position.
En
54
Chapter
10 Using traffic information
When you touch [Traffic Events], the list
displayed will be sorted according to the lin-
ear distance from the vehicle position to the
traffic information.
When you touch [Traffic on Route], the list
displayed will be sorted according to the
distance from the vehicle position to the
traffic information.
!:
You can sort the traffic information in alpha-
betical order.
!:
You can sort the traffic information accord-
ing to the incident.
The list will be sorted in the order of closed/
blocked roads, traffic congestion, acci-
dents, road works and others.
Current order is indicated on the upper right of
the screen.
#If you touch [Refresh] while new traffic infor-
mation is received, current information is chan-
ged and old information is removed. The traffic
information list is updated to reflect the new si-
tuation.
5 Touch .
The previous screen returns.
Checking traffic
information on the route
All traffic information on the current route is
displayed on screen in a list.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Traffic].
The Traffic Menuscreen appears.
3 Touch [Traffic on Route].
The Traffic on Routescreen appears.
The method for checking the content dis-
played on the screen is the same as Traffic
Event Listscreen.
=For details, refer to Checking all traffic infor-
mation on the previous page.
How to read traffic
information on the map
The traffic event information displayed on the
map is as follows.
pA line is displayed only when the map scale
is 2.5 miles (5 km) or lower.
pIcons appear only when the scale on the
map is 10 miles (20 km) or lower. If the
scale is changed, the icons are resized ac-
cording to the selected scale.
Traffic event icon
!with yellow line:
Stop-and-go traffic
!with red line:
Stopped traffic
!with black line:
Closed/blocked roads
!etc.:
Accidents, constructions, etc.
pFor meanings of other icons, check them
the Traffic Type Settingsscreen.
=For details of the operations, refer to Select-
ing traffic information to display on page
58.
Viewing the traffic flow
All traffic flow information is displayed on
screen in a list.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Traffic].
The Traffic Menuscreen appears.
En 55
Chapter
10
Using traffic information
Using traffic information
3 Touch [Traffic Flow].
A list with traffic flow information that has
been received is shown. The list is sorted by
distance from your current position.
Places (street names) where incidents have
occurred are displayed on the list.
4 Select an incident you want to view in
detail.
The details of the selected incident are dis-
played.
pTouching an incident you want to see allows
you to view the detailed information of the
incident. If the information cannot be dis-
played on one screen, touch or to view
the remaining information.
pTouching allows you to check the loca-
tion on a map. (Traffic information without
positional information cannot be checked
on a map.)
#If you touch [Sort], the traffic information can
be sorted.
Each time you touch the key changes the setting.
!:
You can sort the traffic information by the
linear distance from your current position.
!:
You can sort the traffic information in alpha-
betical order.
!:
You can sort the traffic information by the
average speed.
The list will be sorted in the order of closed/
blocked roads, traffic congestion, acci-
dents, road works and others.
Current order is indicated on the upper right of
the screen.
#If you touch [Refresh] while new traffic infor-
mation is received, current information is chan-
ged and old information is removed. The traffic
information list is updated to reflect the new si-
tuation.
#Touch .
The traffic event information displayed on the
map is as follows.
Traffic flow icon and line
!Red: average speed in this area is slower
than 15 mph (24 km/h)
!Yellow: average speed in this area is be-
tween 15 mph to 45 mph (24 km/h to 72 km/
h)
!Green: average speed in this area is faster
than 45 mph (72 km/h) (An icon without a
line will be displayed)
Setting an alternative route
to avoid traffic congestion
The navigation system checks at regular inter-
vals whether or not there is the traffic informa-
tion on your route. If the navigation system
detects any traffic congestion on your current
route, the system tries to find a better route in
the background.
pThe following types of traffic incidents on
the route will be checked: stop and go,
stopped traffic and closed/blocked roads
except for closed freeway exits/entrances.
En
56
Chapter
10 Using traffic information
Checking for traffic congestion
automatically
If there is information about traffic congestion
on your current route and if an alternative
route can be found, the navigation system will
recommend a new alternative route automati-
cally. In such a case, the following screen will
appear.
12
1Difference in distance and travel time between
the existing route and new route.
2Distance from the current position of your ve-
hicle to the point of entry into the new route.
pThere is no action if the system cannot find
any traffic congestion information on your
route or the system cannot find an alterna-
tive.
1 Touch [New].
The recommended route is displayed on the
screen.
#If you touch [Current] while the recom-
mended route is displayed, the screen switches
to the current route display.
2 Touch [OK].
The displayed route is set.
pWhen no selection is made, the screen re-
turns to the previous screen.
Checking traffic information
manually
Touching the notification icon on the map
screen allows you to check traffic information
on your route while the icon is displayed. The
notification icon is only displayed on the navi-
gation map screen if there is any traffic infor-
mation on your route.
pThe notification icon is not available if your
vehicle deviates from the route.
1 Set [Show Traffic Incident] to View.
=For details, refer to Displaying the traffic no-
tification icon on page 166.
2 Display the map screen.
The icon appears when the system acquires
traffic information on the current route.
=For details of the operations, refer to Screen
switching overview on page 26.
3 Touch the notification icon while the
icon is displayed.
Notification icon
Traffic information on the current route is dis-
played on the map screen.
4 Touch [Diversion] to search for an alter-
native route.
After touching [Diversion], the route is recal-
culated taking all traffic congestion on your
current route into account.
p[Diversion] will be available only when the
system can find traffic congestion.
En 57
Chapter
10
Using traffic information
Using traffic information
pNotification icon shows the nearest traffic
information on the route. However, if you
touch [Diversion], the route is recalculated
by taking into account not only this infor-
mation, but also all traffic congestion infor-
mation on the route.
=For details, refer to Checking for traffic con-
gestion automatically on the previous page.
#If you touch [List], the Traffic on Route
screen appears.
#If you touch , the message disappears and
the map screen returns.
Selecting traffic
information to display
There are different types of traffic information
that can be received via the RDS-TMC service,
and you can select which types will be incor-
porated and displayed on your navigation sys-
tem.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Traffic].
The Traffic Menuscreen appears.
3 Touch [Traffic Settings].
The Traffic Settingsscreen appears.
4 Touch [Displayed Traffic Info].
The Traffic Type Settingsscreen appears.
5 Touch the traffic information item to
display.
A check mark appears next to the selected
traffic information.
#If you touch [All], you can select all entries. If
you want to deselect all entries, touch [None].
6 Touch [OK].
The selected traffic information icon is added
to the screen.
7 Touch [OK].
Selecting preferred RDS-TMC
service provider manually
A default preferred TMC service provider for
each country has been set. The navigation sys-
tem tunes to the radio station with good recep-
tion among the preferred RDS-TMC service
providers. If you want to set another preferred
RDS-TMC service provider, you can manually
select one from available RDS-TMC service
providers.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Traffic].
The Traffic Menuscreen appears.
3 Touch [TMC Provider Selection].
4 Touch the desired service provider on
the list.
After touching a service provider, the system
starts tuning to the selected RDS-TMC service
provider. When the tuning is successful, the
system returns to the map display.
En
58
Chapter
10 Using traffic information
If your devices feature Bluetooth®technology,
this navigation system can be connected to
your devices wirelessly. This section describes
how to set up a Bluetooth connection.
For details about the connectivity with the de-
vices featuring Bluetooth wireless technology,
refer to the information on our website.
Preparing communication
devices
This navigation system has a built-in function
to use devices featuring Bluetooth wireless
technology.
=For details, refer to Notes for hands-free
phoning on page 72.
You can register and use devices that feature
the following profiles with this navigation sys-
tem.
!HFP (Hands Free Profile)
!A2DP (Advanced Audio Distribution Pro-
file)
pIf the registered device features both HFP
and A2DP, the hands-free connection is
made and then the Bluetooth audio con-
nection is made.
If the registered device features either pro-
file, the corresponding connection is made.
pWhen the navigation system is turned off,
the Bluetooth connection is also discon-
nected. When the system restarts, the sys-
tem automatically attempts to reconnect
the previously-connected device. Even
when the connection is severed for some
reason, the system automatically recon-
nects the specified device (except when the
connection is severed due to device oper-
ation).
Registering your Bluetooth
devices
You need to register your devices featuring
Bluetooth wireless technology when you con-
nect it for the first time. A total of 5 devices
can be registered. Three registration methods
are available:
!Searching for nearby Bluetooth devices
!Pairing from your Bluetooth devices
!Searching for a specified Bluetooth device
pIf you try to register more than 5 devices,
the system will ask you to select one of the
registered devices to delete.
=For details, refer to Deleting a registered
device on page 62.
Searching for nearby Bluetooth
devices
The system searches for available Bluetooth
devices near the navigation system, displays
them in a list, and registers them for connec-
tion.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific-action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
3 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
4 Touch [Registration].
The Nearby Device Listscreen appears.
The system searches for Bluetooth devices
waiting for the connection and displays them
in the list if a device is found.
pUp to 30 devices will be listed in the order
that the devices are found.
En 59
Chapter
11
Registering and connecting a Bluetooth device
Registering and connecting a Bluetooth device
5 Wait until your Bluetooth device ap-
pears in the list.
pIf you cannot find the Bluetooth device that
you want to connect, check that the device
is waiting for the Bluetooth wireless tech-
nology connection.
6 Touch the Bluetooth device name you
want to register.
#If you touch [Search Again], the system starts
searching for Bluetooth devices waiting for con-
nection, and displays them in the list format
when any devices are detected.
7 Enter the password (the default pass-
word is 1111) using the Bluetooth de-
vice.
Enter the password while the message Please
follow the instructions on your mobile
phone.appears.
The device is registered in the navigation sys-
tem.
After the device is successfully registered, the
Bluetooth connection is established from the
navigation system.
Pairing from your Bluetooth
devices
You can register the Bluetooth device by set-
ting the navigation system to standby mode
and requesting connection from the Bluetooth
device.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific-action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
3 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
4 Touch [Registration].
The Nearby Device Listscreen appears.
5 Touch [Register from mobile phone].
The navigation system waits for a Bluetooth
wireless technology connection.
En
60
Chapter
11 Registering and connecting a Bluetooth device
6 Register the navigation system on your
Bluetooth device.
If your device asks you to enter a password,
enter the password of the navigation system.
When the device is successfully registered,
the connection settings are made from the de-
vice.
pIf registration fails, repeat the procedure
from the beginning.
Searching for a specified
Bluetooth device
If you cannot connect your Bluetooth device
using the nearby device search and if your
Bluetooth device is found in the list, try the fol-
lowing method.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific-action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
3 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
4 Touch [Registration].
The Nearby Device Listscreen appears.
5 Touch [Select specific devices].
The Select specific devicesscreen appears.
6 Touch the Bluetooth device name to be
connected.
The system searches for Bluetooth devices
waiting for the connection and displays them
in the list if a device is found.
pIf you cannot find the desired device name
on the list, touch [Other phones] to search
the devices available nearby.
7 Wait until your Bluetooth device ap-
pears in the list.
pIf you cannot find the Bluetooth device that
you want to connect, check that the device
is waiting for the Bluetooth wireless tech-
nology connection.
En 61
Chapter
11
Registering and connecting a Bluetooth device
Registering and connecting a Bluetooth device
8 Touch the Bluetooth device name you
want to register.
#If you touch [Search Again], the system starts
searching for Bluetooth devices waiting for con-
nection, and displays them in the list format
when any devices are detected.
9 Enter the password (the default pass-
word is 1111) using the Bluetooth de-
vice.
Enter the password while the message Please
follow the instructions on your mobile
phone.appears.
The device is registered in the navigation sys-
tem.
After the device is successfully registered, the
Bluetooth connection is established from the
navigation system.
Deleting a registered device
When you have already registered 5 Bluetooth
devices and you want to add another one, you
must first delete one of the registered devices.
pIf a registered phone is deleted, all the
phone book entries and call history lists
that correspond to the phone will be also
cleared.
1 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
3 Touch [Registration].
A message prompting you to delete a regis-
tered device appears.
4 Touch [OK].
The Delete from Connection Listscreen
appears.
5 Touch the Bluetooth device name that
you want to delete.
The device is deleted.
Connecting a registered
Bluetooth device manually
The navigation system automatically connects
the Bluetooth device selected as the target of
connection. However, connect the Bluetooth
device manually in the following cases:
!Two or more Bluetooth devices are regis-
tered, and you want to manually select the
device to be used.
!You want to reconnect a disconnected
Bluetooth device.
En
62
Chapter
11 Registering and connecting a Bluetooth device
!Connection cannot be established automa-
tically for some reason.
If you start connection manually, carry out the
following procedure. You can also connect the
Bluetooth device by having the navigation sys-
tem detect it automatically.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific-action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
3 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
4 Touch [Connection].
The Connection Listscreen appears.
5 Touch the name of the device that you
want to connect.
The Select Profilescreen appears.
6 Touch the profile that you want to con-
nect.
You can select the following profiles:
!Handsfree and Audio:
Connects the device as the hands-free
phone and the Bluetooth audio player.
!Audio:
Connects the device as Bluetooth audio
player.
!Handsfree:
Connects the device as the hands-free
phone.
Connection starts.
When a connection is successfully estab-
lished, a connection complete message ap-
pears and the map screen returns by touching
[OK].
pTo cancel the connection to your device,
touch [Cancel].
pIf connection fails, check whether your de-
vice is waiting for a connection and then
retry.
Setting for priority connecting
The selected device is set for priority connect-
ing.
And one of the following icons is indicated
next to the device name.
!:
Appears when the device is registered so
that it will be preferentially paired with both
the hands-free and Bluetooth audio con-
nection.
!:
Appears when the device is registered so
that it will be preferentially paired with the
Bluetooth audio connection.
!:
Appears when the device is registered so
that it can be preferentially paired with the
hands-free connection.
En 63
Chapter
11
Registering and connecting a Bluetooth device
Registering and connecting a Bluetooth device
CAUTION
For your safety, avoid talking on the phone as
much as possible while driving.
If your cellular phone features Bluetooth tech-
nology, this navigation system can be con-
nected to your cellular phone wirelessly. Using
this hands-free function, you can operate the
navigation system to make or receive phone
calls. You can also transfer the phone book
data stored in your cellular phone to the navi-
gation system. This section describes how to
set up a Bluetooth connection and how to op-
erate a cellular phone featuring Bluetooth
technology on the navigation system.
For details about the connectivity with the de-
vices featuring Bluetooth wireless technology,
refer to the information on our website.
Displaying the phone menu
Use the Phone Menuif you connect the cel-
lular phone to the navigation system for utiliza-
tion.
=For details, refer to Chapter 11.
1 Press the HOME button to display the
Top Menuscreen.
2 Touch [Phone].
The Phone Menuscreen appears.
21 3 45
1Name of connected cellular phone
2Network name of the cellular phone com-
pany
3Strength of the Bluetooth connection be-
tween the navigation system and the device
4Reception status of the cellular phone
5Battery status of the cellular phone
Making a phone call
You can make a phone call in many different
ways.
Direct dialing
1 Display the Phone Menuscreen.
=For details, refer to Displaying the phone
menu on this page.
2 Touch [Dial Pad].
The Dial Inputscreen appears.
3 Touch the number keys to enter the
phone number.
The phone number that was input is dis-
played.
When the input is complete, [OK] becomes
active.
#If you touch , the entered number is deleted
one digit at a time from the end of the number.
Press and hold to delete all digits.
#If you touch , the previous screen returns.
4 Touch [OK] to make a call.
pTo cancel the call after the system starts
dialing, touch .
5 Touch to end the call.
En
64
Chapter
12 Using hands-free phoning
Making a call home easily
You can call home without taking the time to
enter the phone number if the phone number
has been registered.
1 Display the Phone Menuscreen.
=For details, refer to Displaying the phone
menu on the previous page.
2 Touch [Call Home].
Dialing home starts.
pIf you have not registered your home num-
ber, a message appears. Touch [Register]
to start registration.
=For details, refer to Registering your
home on page 163.
Calling a number in the phone
book
You can select and call a contact from the
phone book entries transferred to the naviga-
tion system.
pBefore using this function, you need to
transfer the phone book entries stored in
your cellular phone to the navigation sys-
tem.
=For details, refer to Transferring the phone
book on page 68.
Searching for a contact to call on the
alphabet tabs
1 Display the Phone Menuscreen.
=For details, refer to Displaying the phone
menu on the previous page.
2 Touch [Contacts].
The Contacts Listscreen appears.
3 Touch alphabet tabs.
The screen jumps to the top of the page dis-
playing the entries that start with the selected
letter or number.
pTouching [#ABCDE] displays all entries that
start with symbols or numbers.
pTouching [Others] displays the page includ-
ing entries that are not assigned to any of
the other tabs.
4 Touch the desired name on the list.
The Contacts Type Selectionscreen ap-
pears.
5 Touch the desired entry on the list to
make a call.
6 Touch to end the call.
Calling a number by searching by name
1 Display the Phone Menuscreen.
=For details, refer to Displaying the phone
menu on the previous page.
2 Touch [Contacts].
The Contacts Listscreen appears.
3 Touch [Search].
The Contacts Name Searchscreen appears.
You can search by the names registered in the
Contacts Listscreen.
En 65
Chapter
12
Using hands-free phoning
Using hands-free phoning
4 Enter the desired name and then touch
[OK].
The Contacts Name Search Resultsscreen
appears.
5 Touch the desired name on the list.
The Contacts Type Selectionscreen ap-
pears.
6 Touch the desired entry on the list to
make a call.
7 Touch to end the call.
Dialing from the history
The most recent calls made (dialed), received
and missed are stored in the call history list.
You can browse the call history list and call
numbers from it.
pEach call history saves 30 calls per regis-
tered cellular phone. If the number of calls
exceeds 30, the oldest entry will be deleted.
1 Display the Phone Menuscreen.
=For details, refer to Displaying the phone
menu on page 64.
2 Touch [Received Calls], [Dialed Calls] or
[Missed Calls].
The selected call history list appears.
3 Touch an entry on the list.
Dialing starts.
pTo cancel the call after the system starts
dialing, touch .
#If you touch [Detail], the Detailed Informa-
tionscreen appears.
You can check the details of the party before mak-
ing a phone call.
4 Touch to end the call.
Dialing a favorite location
You can make a call to an entry stored in the
Favoriteslist.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Favorites].
The Favoritesscreen appears.
3 Touch next to the location that you
want to make a call.
The Edit Favoritescreen appears.
4 Touch [Call] to make a call.
pTo cancel the call after the system starts
dialing, touch .
5 Touch to end the call.
Dialing a facilitys phone number
You can make a call to facilities with phone
number data.
pYou cannot make a call to locations or POIs
that have no phone number data.
1 Display the Destination Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
En
66
Chapter
12 Using hands-free phoning
2 Touch [POI].
The POI Searchscreen appears.
3 Search for the POI.
The POI Listscreen appears.
=For details of the operation, refer to Search-
ing for Points of Interest (POI) on page 40.
4 Touch next to the POI that you want
to call.
The POI Informationscreen appears.
5 Touch [Call] to make a call.
pTo cancel the call after the system starts
dialing, touch .
6 Touch to end the call.
Dialing from the map
You can make a call by selecting the icon of a
registered location or a POI icon from the map
screen.
pYou cannot make a call to locations or POIs
that have no phone number data.
1 Scroll the map, and place the cursor on
an icon on the map.
2 Touch .
The Information Listscreen appears.
3 Touch the POI you want.
The POI Informationscreen appears.
4 Touch [Call] to make a call.
pTo cancel the call after the system starts
dialing, touch .
5 Touch to end the call.
Receiving a phone call
You can perform hands-free answering by
using the navigation system.
Answering an incoming call
The system informs you that it is receiving a
call by displaying a message and producing a
ring sound.
pYou can set the system to automatically an-
swer incoming calls. If not set to automati-
cally answer incoming calls, you will have
to answer the calls manually.
=For details, refer to Answering a call
automatically on page 70.
pIf the voice on the other end of the call is
too quiet to hear, you can adjust the volume
of the received voice.
=For details, refer to Setting the Volume
for Guidance and Phone on page 173.
pThe registered name appears if the phone
number of the received call is already regis-
tered in Contacts.
pDepending on the caller ID service, the
phone number of the received call may not
be displayed. Unknownappears instead.
1 To answer an incoming call, touch .
The operation menu during a call appears.
#If you touch [Vol ]or[Vol +], you can adjust
the ring tone volume.
#If you touch , an incoming call is re-
jected.
The rejected call is recorded in the missed call
history list.
=For details, refer to Dialing from the history
on the previous page.
En 67
Chapter
12
Using hands-free phoning
Using hands-free phoning
2 Touch to end the call.
The call ends.
pYou may hear a noise when you hang up
the phone.
#If you touch [Vol ]or[Vol +], you can adjust
the volume when talking.
#If you touch [Close Menu], the operation
menu during call is minimized.
To display the menu again, touch .
Transferring the phone book
You can transfer the phone book entries from
your cellular phone to the phone book of the
navigation system.
pDepending on the cellular phone, phone
book may be called Contacts, Business
Card or something else.
pWith some cellular phones, it may not be
possible to transfer the entire phone book
at once. In this case, transfer addresses
one at a time from your phone book using
your cellular phone.
pIf you connect the cellular phone featuring
auto-synchronization function, phone book
transfer or synchronization will be automa-
tically performed.
pA maximum of 1 000 entries can be trans-
ferred per cellular phone. If the entries ex-
ceed 1 000, the extra entries will not be
transferred. If more than one number is re-
gistered for one person, such as work place
and home, each number may be counted
separately.
pEach entry can hold up to 5 phone num-
bers.
pDepending on the cellular phone that is
connected to this navigation system via
Bluetooth technology, this navigation sys-
tem may not be able to display the phone
book correctly. (Some characters may be
garbled.)
pIf the phone book in the cellular phone con-
tains image data, the phone book may not
be correctly transferred.
pThe transferred data cannot be edited on
the navigation system.
1 Connect the cellular phone that has the
phone book to transfer.
=For details, refer to Connecting a registered
Bluetooth device manually on page 62.
2 Touch [Contacts Transfer] on the
Phone Menuscreen.
3 Check that the following screen is dis-
played, and operate your cellular phone to
transfer the phone book entries.
When data transfer is finished, a message ask-
ing whether you want to transfer more data
appears.
Touch [Yes] to continue the transfer.
En
68
Chapter
12 Using hands-free phoning
4 Touch [No].
The transferred data is imported to the naviga-
tion system.
When the data is successfully imported, an
import complete message is displayed and the
Contacts Listscreen appears.
pIt may take time depending on how many
entries will be transferred.
Changing the order of names in
the phone book
1 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
3 Touch [Sort Order].
Each touch of [Sort Order] changes the set-
tings as follows:
!First (default):
Switches the contacts entries to first/last
name display and sort the entries by order
of first name.
!Last:
Switches the contacts entries to last/first
name display and sort the entries by order
of last name.
pDepending on the type of cellular phone,
the settings may not be available.
Deleting registered contacts
1 Display the Phone Menuscreen.
=For details, refer to Displaying the phone
menu on page 64.
2 Touch [Contacts].
The Contacts Listscreen appears.
3 Touch [Delete].
The Delete from Contactsscreen appears.
4 Touch the entry you want to delete.
A check mark appears next to the entry.
#If you touch [All], you can select all entries. If
you want to deselect all entries, touch [None].
5 Touch [Delete].
The message confirming whether to delete the
entry appears.
6 Touch [Yes].
The entry is deleted.
#If you touch [No], the deletion is canceled.
Changing the phone settings
Editing the device name
You can change the device name to be dis-
played on your cellular phone. (Default is
PIONEER NAVI.)
1 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
3 Touch [Device Name].
The keyboard to enter the name appears.
4 Touch to delete the current name,
and enter the new name by using the key-
board.
En 69
Chapter
12
Using hands-free phoning
Using hands-free phoning
pUp to 16 characters can be entered for a de-
vice name.
5 Touch [OK].
The name is changed.
Editing the password
You can change the password to be used for
authentication on your cellular phone. (De-
fault is 1111.)
pFour to eight characters can be entered for
a password.
1 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
3 Touch [Password].
The Set Passwordscreen appears.
4 Touch to delete the current pass-
word, and enter the new password by
using the keyboard.
5 Touch [OK].
The password is changed.
Stopping Bluetooth wave
transmission
You can stop transmission of electric waves by
turning off the Bluetooth function. If you do
not use the Bluetooth wireless technology, we
recommend selecting Off.
1 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
3 Touch [Bluetooth On/Off].
Each touch of [Bluetooth On/Off] changes
the settings as follows:
!On (default):
Turns on Bluetooth function.
!Off:
Turns off Bluetooth function.
Echo canceling and noise reduction
When you are operating hands-free phoning
in the vehicle, you may hear an undesirable
echo. This function reduces the echo and
noise while you are using hands-free phoning,
and maintains a certain sound quality.
1 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
3 Touch [Echo Cancel].
Each touch of [Echo Cancel] changes the set-
tings as follows:
!On (default):
Activates echo canceling and noise reduc-
tion.
!Off:
Deactivates echo canceling and noise re-
duction.
Answering a call automatically
The navigation system automatically answers
incoming calls to the cellular phone, so you
can answer a call while driving without taking
your hands off the steering wheel.
1 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
3 Touch [Auto Answer Preference].
The Auto Answer Preferencescreen ap-
pears.
En
70
Chapter
12 Using hands-free phoning
4 Touch the desired option.
On this screen, you can select the following
items:
!Off (default):
No automatic response. Respond manually.
!Immediately:
Answers immediately.
!After 3 seconds:
Answers after three seconds.
!After 6 seconds:
Answers after six seconds.
!After 10 seconds:
Answers after ten seconds.
Setting the automatic rejection
function
If this function is on, the navigation system
automatically rejects all incoming calls.
1 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
3 Touch [Refuse All Calls].
Each touch of [Refuse All Calls] changes the
settings as follows:
!Off (default):
Accepts all incoming calls.
!On:
Rejects all incoming calls.
pIf both Refuse All Callsand Auto An-
swer Preferenceare activated, Refuse
All Callstakes priority and all incoming
calls are automatically rejected.
pIf Refuse All Callsis set to On, rejected
incoming calls will not be stored in the
missed call list.
Clearing memory
You can clear the memory of each item that
corresponds to the connected cellular phone:
phone book, dialed/received/missed call his-
tory list and preset dials.
1 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
3 Touch [Clear Memory].
The Clear Memoryscreen appears.
4 Touch the desired option.
On this screen, you can select the following
items:
!Contacts:
Clears the registered phone book.
!Received Calls List:
Clears the received call history list.
!Dialed Calls List:
Clears the dialed call history list.
!Missed Calls List:
Clears the missed call history list.
#If you touch [Clear All], all the data is cleared
that correspond to the connected cellular phone.
5 Touch [Yes].
Data on the selected item is cleared from this
navigation systems memory.
#If you do not want to clear the memory that
you have selected, touch [No].
En 71
Chapter
12
Using hands-free phoning
Using hands-free phoning
Updating the Bluetooth
wireless technology software
Update files will be available for download in
the future. You will be able to download the lat-
est update from an appropriate website to
your PC.
pBefore you download the files and install
the update, read through the instructions
on the website. Follow the instructions on
the website for steps until [Firmware up-
date] becomes active.
1 Store the updated files into the SD
memory card.
2 Insert an SD memory card into the SD
card slot.
=For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 18.
3 Display the Settings Menuscreen.
=For details of the operations, refer to Screen
switching overview on page 26.
4 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
5 Touch [Firmware update].
The current version is displayed.
6 Touch [Firmware update].
The message confirming whether or not to
start the update will appear.
7 Touch [Yes].
Update starts.
8 Wait until the upgrade process is com-
plete.
A message will appear after the update is
complete.
9 Touch [OK].
The message disappears, and the map screen
returns.
10 Eject the SD memory card.
Notes for hands-free phoning
General notes
!Connection to all cellular phones featuring
Bluetooth wireless technology is not guar-
anteed.
!The line-of-sight distance between this na-
vigation system and your cellular phone
must be 10 meters or less when sending
and receiving voice and data via Bluetooth
technology. However, the actual transmis-
sion distance may be shorter than the esti-
mated distance, depending on the usage
environment.
!With some cellular phones, the ring sound
may not be output from the speakers.
!If private mode is selected on the cellular
phone, hands-free phoning may be dis-
abled.
Registration and connection
!Cellular phone operations vary depending
on the type of cellular phone. Refer to the
instruction manual that came with your cel-
lular phone for detailed instructions.
!With cellular phones, phone book transfer
may not work even though your phone is
paired with the navigation system. In that
case, disconnect your phone, perform pair-
ing again from your phone to the naviga-
tion system, and then perform the phone
book transfer.
Making and receiving calls
!You may hear a noise in the following situa-
tions:
En
72
Chapter
12 Using hands-free phoning
When you answer the phone by using
the button on the phone.
When the person on the other end of
line hangs up the phone.
!If the person on the other end of the phone
call cannot hear the conversation due to an
echo, decrease the volume level for hands-
free phoning. This may reduce the echo.
!With some cellular phones, even if you
press the accept button on the cellular
phone when a call comes in, hands-free
phoning may not be performed.
!The registered name appears if the phone
number of the received call is already regis-
tered in the phone book. When one phone
number is registered under different
names, the name that comes first in the
phone book is displayed.
!If the phone number of the received call is
not registered in the phone book, the
phone number of the received call appears.
The received call history and the dialed
number history
!Calls made or editing performed only on
your cellular phone will not be reflected to
the dialed number history or phone book in
the navigation system.
!You cannot make a call to the entry of an
unknown user (no phone number) in the re-
ceived call history.
!If calls are made by operating your cellular
phone, no history data will be recorded in
the navigation system.
Phone book transfers
!If there are more than 1 000 phone book en-
tries on your cellular phone, all entries may
not be downloaded completely.
!With some cellular phones, it may not be
possible to transfer all items in the phone
book at one time. In this case, transfer
items one by one from your cellular phone.
!Depending on the cellular phone, this navi-
gation system may not display the phone
book correctly. (Some characters may be
garbled, or first and last names may be re-
versed.)
!If the phone book in the cellular phone con-
tains image data, the phone book may not
be transferred correctly. (Image data can-
not be transferred from the cellular phone.)
!Depending on the cellular phone, phone
book transfer may not be available.
En 73
Chapter
12
Using hands-free phoning
Using hands-free phoning
This chapter describes the basic operations of
the AV source.
You can play or use the following sources with
your Pioneer navigation system.
!Tuner (HD Radiotuner) (*1)
!FM (*2)
!AM (*2)
!CD
!ROM (in MP3, AAC, WMA)
!DVD-Video
!DivX
!USB
!SD
The following sources can be played back or
used by connecting an auxiliary device.
!HD Radio (HD Radiotuner) (*2)
!iPod
!Smartphone application (Pandora, Aha
Radio)
!Bluetooth audio
!XM Tuner
!SIRIUS Tuner
!AV input 1 (AV1)
!AV input 2 (AV2)
!External unit 1 (EXT1)
!External unit 2 (EXT2)
p(*1) A source available only on AVIC-
Z140BH.
p(*2) Sources available on AVIC-X940BT.
Displaying the AV
operation screen
%Press the MODE button when the map
screen is displayed.
pThe AV operation screen can also be dis-
played by touching [AV Source & Con-
tents] on the Top Menu.
Selecting a source
Source icons
1 Touch, then drag any source icons up or
down to display additional source icons.
The AV source icons will scroll, and previously
hidden icons will appear.
2 Tap the icon of the source you want to
select.
The operation screen of the selected source
appears.
pThe currently selected source icon is high-
lighted.
Operating list screens (e.g.
iPod list screen)
This describes the operations when a list
screen is displayed.
pFor information on how to display the list
screen, refer to the descriptions within the
desired source portion of this manual.
Switching between the AV
operation screen and the list
screen
The following example describes how to
switch between the AV operation screen and
the artist list screen of iPod.
En
74
Chapter
13 Basic operations of the AV source
1 Touch the appropriate key to display
the list that you want.
2 Touch the key on the right edge of the
screen.
The AV operation screen returns.
Selecting an item
1 Scroll the list by dragging items up or
down to display the item you want to se-
lect.
pFlicking a list item enables you to quickly
scroll through the list.
To stop scrolling, gently touch the list.
2 Tap the item.
pThe item currently selected is highlighted.
Returning to the previous display
%Touch to return to the previous
screen.
En 75
Chapter
13
Basic operations of the AV source
Basic operations of the AV source
pThis function is available for AVIC-X940BT
only.
You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio (FM).
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 74.
2 Tap [FM] on the left edge of the screen
to display the FMscreen.
When the tuner has been tuned in to an HD
Radio broadcasting, [FM] cannot be selected.
3 Use the touch panel keys on the screen
to control the radio.
=For details, refer to Using the touch panel
keys on the next page.
Reading the screen
1
23 6
54 7
8
9
1Source icon
Shows which source has been selected.
2Band indicator
Shows which band the radio is tuned to: FM1
to FM3.
3Program service name indicator
Shows the program service name (station
name) of the current station.
4Signal level indicator
5Frequency indicator
6STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
7Current time
8Program service name or frequency indi-
cator
Shows the frequency of the preset item. If the
program service name can be obtained, the
program service name is shown instead of the
frequency.
9Preset number indicator
Shows what preset item has been selected.
En
76
Chapter
14 Using the radio (FM)
Using the touch panel keys
6
5
1
34
2
1Performs manual tuning
To tune manually, touch [o]or[p] briefly.
The frequencies move up or down one step at
a time.
Performs seek tuning
To perform seek tuning, touch and hold [o]
or [p] for about one second and then re-
lease. The tuner will scan frequencies until a
broadcast strong enough for good reception
is found.
pYou can cancel seek tuning by touching
either [o]or[p] briefly.
pIf you keep holding [o]or[p], you
can skip broadcasting frequencies.
Seek tuning will start at the time you re-
lease the keys.
2Selects a preset channel
The keys can be used to switch preset chan-
nels.
Scroll by dragging the keys up or down to dis-
play the preset channel you want to select,
and tap the channel.
pThe lower keys and the upper keys ap-
pear only when the preset channel is se-
lected.
3Recalls equalizer curves
=For details, refer to Using the equalizer
on page 183.
4Displays the Functionmenu
=For details, refer to Using advanced func-
tions on the next page.
5Switches between the AV operation
screen and the preset list display
You can switch the screen display according
to your preference.
=For details of the operation, refer to
Switching between the AV operation
screen and the list screen on page 74.
6Selects an FM band
Tapping the key repeatedly switches between
the following FM bands: FM1,FM2,orFM3.
pThis function is convenient for preparing
different preset lists for each band.
Storing and recalling broadcast
frequencies
With a tap of any of the preset tuning keys
(P1to P6), you can easily store up to six
broadcast frequencies for later recall (also
with the tap of a key).
En 77
Chapter
14
Using the radio (FM)
Using the radio (FM)
1 Select a frequency that you want to
store in memory.
2 Display the preset channel list.
=For details, refer to Switches between the
AV operation screen and the preset list
display on the previous page.
3 Keep touching a preset tuning key [P1]
to [P6].
Preset list display
Preset tuning keys
The selected radio station has been stored in
memory.
The next time you tap the same preset tuning
key P1to P6, the radio station frequencies
are recalled from memory.
pUp to 18 FM stations, six for each of the
three FM bands can be stored in memory.
=For details of the list operations, refer to Op-
erating list screens (e.g. iPod list screen) on
page 74.
Operating by hardware
buttons
Pressing the TRK button
You can move preset channels up or down.
Pressing and holding the TRK button
You can perform seek tuning.
Using advanced functions
%Touch on the FMscreen.
The Functionmenu appears.
1 2
1Stores the strongest broadcast frequen-
cies
2Tunes in strong signals
=For details of each function, refer to sec-
tions below with the relative titles.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under the preset tuning keys P1to
P6and, once stored there, you can tune into
them with the touch of a key.
pStoring broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved.
1 Touch on the FMscreen.
The Functionmenu appears.
2 Touch [BSM].
3 Touch [Start] to begin a search.
BSMbegins to flash. While BSMis flash-
ing, the six strongest broadcast frequencies
will be stored under the preset tuning keys
P1to P6in order of their signal strength.
When this is complete, BSMstops flashing.
#If you touch [Stop], the storage process is
canceled.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
En
78
Chapter
14 Using the radio (FM)
1 Touch on the FMscreen.
The Functionmenu appears.
2 Touch [Local].
3 Touch [On] to turn local seek tuning on.
#If you touch [Off], local seek tuning is turned
off.
4 Touch [cPrev] or [Nextd] to set the sen-
sitivity.
There are four levels of sensitivity for FM.
Level: 1234
pThe level 4setting allows reception of only
the strongest stations, while lower settings
let you receive weaker stations.
En 79
Chapter
14
Using the radio (FM)
Using the radio (FM)
pThis function is available for AVIC-X940BT
only.
You can listen to the radio using this naviga-
tion system. This section describes operations
for radio (AM).
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 74.
2 Tap [AM] on the left edge of the screen
to display the AMscreen.
When the tuner has been tuned in to an HD
Radio broadcasting, [AM] cannot be selected.
3 Use the touch panel keys on the screen
to control the radio.
=For details, refer to Using the touch panel
keys on the next page.
Reading the screen
1
32 4
3
5
1Source icon
Shows which source has been selected.
2Signal level indicator
3Frequency indicator
Shows the current frequency.
4Current time
5Preset number indicator
Shows what preset item has been selected.
En
80
Chapter
15 Using the radio (AM)
Using the touch panel keys
5
1
34
2
1Performs manual tuning
To tune manually, touch [o]or[p] briefly.
The frequencies move up or down one step at
a time.
Performs seek tuning
To perform seek tuning, touch and hold [o]
or [p] for about one second and then re-
lease. The tuner will scan frequencies until a
broadcast strong enough for good reception
is found.
pYou can cancel seek tuning by touching
either [o]or[p] briefly.
pIf you keep holding [o]or[p], you
can skip broadcasting frequencies.
Seek tuning will start at the time you re-
lease the keys.
2Selects a preset channel
The keys can be used to switch preset chan-
nels.
Scroll by dragging the keys up or down to dis-
play the preset channel you want to select,
and tap the channel.
pThe lower keys and the upper keys ap-
pear only when the preset channel is se-
lected.
3Recalls equalizer curves
=For details, refer to Using the equalizer
on page 183.
4Displays the Functionmenu
=For details, refer to Using advanced func-
tions on the next page.
5Switches between the AV operation
screen and the preset list display
You can switch the screen display according
to your preference.
=For details of the operation, refer to
Switching between the AV operation
screen and the list screen on page 74.
Storing and recalling broadcast
frequencies
With a tap of any of the preset tuning keys
(P1to P6), you can easily store up to six
broadcast frequencies for later recall (also
with the tap of a key).
1 Select a frequency that you want to
store in memory.
En 81
Chapter
15
Using the radio (AM)
Using the radio (AM)
2 Display the preset channel list.
=For details, refer to Switches between the
AV operation screen and the preset list
display on the previous page.
3 Keep touching a preset tuning key [P1]
to [P6].
Preset list display
Preset tuning keys
The selected radio station has been stored in
memory.
The next time you tap the same preset tuning
key P1to P6, the radio station frequencies
are recalled from memory.
=For details of the list operations, refer to Op-
erating list screens (e.g. iPod list screen) on
page 74.
Operating by hardware
buttons
Pressing the TRK button
You can move preset channels up or down.
Pressing and holding the TRK button
You can perform seek tuning.
Using advanced functions
%Touch on the AMscreen.
The Functionmenu appears.
1 2
1Stores the strongest broadcast frequen-
cies
2Tunes in strong signals
=For details of each function, refer to sec-
tions below with the relative titles.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under the preset tuning keys P1to
P6and, once stored there, you can tune into
them with the touch of a key.
pStoring broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved.
1 Touch on the AMscreen.
The Functionmenu appears.
2 Touch [BSM].
3 Touch [Start] to begin a search.
BSMbegins to flash. While BSMis flash-
ing, the six strongest broadcast frequencies
will be stored under the preset tuning keys
P1to P6in order of their signal strength.
When this is complete, BSMstops flashing.
#If you touch [Stop], the storage process is
canceled.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
En
82
Chapter
15 Using the radio (AM)
1 Touch on the AMscreen.
The Functionmenu appears.
2 Touch [Local].
3 Touch [On] to turn local seek tuning on.
#If you touch [Off], local seek tuning is turned
off.
4 Touch [cPrev] or [Nextd] to set the sen-
sitivity.
There are two levels of sensitivity for AM.
Level: 12
pThe level 2setting allows reception of only
the strongest stations, while lower settings
let you receive weaker stations.
En 83
Chapter
15
Using the radio (AM)
Using the radio (AM)
You can listen to the radio by using the naviga-
tion system. This section describes operations
for HD Radio reception.
For AVIC-X940BTusers
This navigation system is ready to receive HD
Radio broadcasts when connected to the GEX-
P20HD, GEX-P10HD, sold separately.
pFor details concerning operation, refer to
the HD Radio tuners operation manual.
pAVIC-Z140BH shows Tunerand AVIC-
X940BT shows HD Radioas the source
icon.
This chapter describes operation proce-
dures for AVIC-Z140BH.
HD Radio broadcasting
HD Radio broadcasting is high quality audio
and data services. HD Radio broadcasting is
brought to you by your local FM or AM sta-
tions.
HD Radio broadcasting features the following:
!High quality audio
!FM multicasting
!Data services
: Sub channel
AM band
Analog AM
Analog AM Digital AM
FM band
Analog FM
Analog FM Digital FM
Analog FM Digital FM-1ch
Digital FM-2ch
Digital FM-3ch
: Main channel
Digital, CD-quality sound. HD Radio Technology enables
local radio stations to broadcast a clean digital signal.
AM sounds like todays FM and FM sounds like a CD.
Program Service Data: Contributes to the superior user
experience of HD Radio Technology. Presents song
name, artist, station IDs, HD2/HD3 Channel Guide, and
other relevant data streams.
Adjacent to traditional main stations are extra local FM
channels. These HD2/HD3 Channels provide new, origi-
nal music as well as deep cuts into traditional genre.
iTunes®Tagging provides you the opportunity to discover
a wide range of content and the means to tagthat con-
tent for later review and purchase from the iTunes®
Store.
Visual information related to content being played on
your HD Radio receiver, such as Album Art, historical
photographs, still art from live broadcasts, among other
related content.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 74.
2 Tap [Tuner] on the left edge of the
screen to display the Tunerscreen.
3 Use the touch panel keys on the screen
to control the radio.
=For details, refer to Using the touch panel
keys on page 86.
En
84
Chapter
16 HD Radioreception
Reading the screen
e
d
12 6
54 783 9
a
cb
pItems marked with asterisk (*) appear only
on AVIC-Z140BH.
1Band indicator
Shows which band the radio is tuned to: FM1,
FM2, FM3 or AM.
2Detailed information
=For details, refer to Switching the display
on page 87.
3Signal level indicator
4Frequency indicator
5Signal type indicator
Shows the type of signal currently being re-
ceived. If a digital broadcasting is received,
Dappears. Otherwise, Aappears.
6Blending mode indicator
=For details, refer to Switching the recep-
tion mode on page 89.
7Song info reception indicator*
Shows the reception status of song informa-
tion.
Indicator Meaning
Appears when the navigation
system receives song informa-
tion and can store it.
The icon is displayed on the op-
eration screen of the HD Radio
receiver.
Appears when the navigation
system is storing song informa-
tion.
The icon is displayed on all op-
eration screens of AV sources.
8Song info status indicator*
Shows the status of the song information
stored in the navigation system.
Indicator Meaning
The number of song information
items stored in the navigation
system is displayed.
The icon is displayed on all op-
eration screens of AV sources.
Appears when song information
is transferred to iPod.
The icon is displayed on all op-
eration screens of AV sources.
9Current time
aAlbum artwork
Shows the album artwork of the current song
if it is available.
pIf the album artwork cannot be ac-
quired, the station logo is displayed.
When the station logo cannot be ac-
quired either, the preset number indica-
tor is displayed.
pThe AVIC-X940BT shows the preset num-
ber indicator only.
bPreset number indicator
=Shows what preset item has been se-
lected.
cSeek type indicator
=For details, refer to Switching the seek
mode on page 89.
dMulticasting indicator
Shows the number of multicast channels in
the current frequency.
eSource icon
Shows which source has been selected.
En 85
Chapter
16
HD Radioreception
HD Radioreception
Using the touch panel keys
7
8
1
56
2
4 3
pItems marked with asterisk (*) appear only
on AVIC-Z140BH.
1Performs manual tuning
To tune manually, touch [o]or[p] briefly.
The frequencies move up or down one step at
a time.
Performs seek tuning
To perform seek tuning, touch and hold [o]
or [p] for about one second and then re-
lease. The tuner will scan frequencies until a
broadcast strong enough for good reception
is found.
pYou can cancel seek tuning by touching
either [o]or[p] briefly.
pWhen an analog station is received, tun-
ing up or down is conducted within ana-
log broadcasts.
If a digital broadcast is not yet received,
tuning up or down tunes into the next or
previous analog station.
Analog FM
Analog FM
Analog FM Digital FM-1ch
Digital FM-2ch
Digital FM-3ch
2Selects a preset channel
The keys can be used to switch preset chan-
nels.
Scroll by dragging the keys up or down to dis-
play the preset channel you want to select,
and tap the channel.
pThe lower keys and the upper keys ap-
pear only when the preset channel is se-
lected.
3Stores song information to an iPod*
En
86
Chapter
16 HD Radioreception
pOnly when the tuner has been tuned in to
an HD Radio station, can the display be
changed.
pWhen the tuner has been tuned in to an HD
Radio station, default display is changed
into station name instead of frequency.
Scrolling the detailed information
You can turn the detailed information scroll
mode on and off.
%Touch and hold [Disp].
Storing song information
to an iPod (iTunes Tagging)
pThis function is available for AVIC-Z140BH
only.
You can store the song information to the
iPod, when the navigation system has received
the song information. The songs will show up
in a playlist called Tagged playlistin iTunes
next time you sync your iPod. You can directly
buy the songs via the navigation system.
Depending on when the song information is
stored, information on the songs before and
after the song on air may also be stored. Be
sure to confirm the song before you purchase.
pThe iTunes Tagging function is available
during reception of digital broadcasts.
pThis function can be operated with the fol-
lowing iPod models:
!iPod touch 4th generation
!iPod touch 3rd generation
!iPod touch 2nd generation
!iPod touch 1st generation
!iPod classic
!iPod nano 6th generation
!iPod nano 5th generation
!iPod nano 4th generation
!iPod nano 3rd generation
!iPhone 4S
!iPhone 4
!iPhone 3GS
!iPhone 3G
!iPhone
pThe version of iTunes must be 7.4 or higher.
1 Tune into the digital broadcast station.
When song information is received, is
displayed while the desired song is being
broadcast, and [Tag] becomes active.
=For details, refer to Song info reception in-
dicator* on page 85.
2 Touch [Tag].
The information on the song on air is stored in
the navigation system.
While the information is being acquired,
is displayed.
When completed, turns off and is
displayed.
pThe song information for up to 50 songs
can be stored on this navigation system.
Depending on when the song information
is stored, information for the previous song
or song after the current song may also be
stored.
3 Connect your iPod.
The song information stored in the navigation
system is transferred to your iPod.
pIf the iPod is already connected, every time
you touch [Tag], the song information will
be transferred to your iPod.
When the song information is stored on
your iPod, disappears.
pWhen transfer of song information is com-
pleted, the information stored in the naviga-
tion system will be automatically cleared.
pIf you turn off the navigation system or dis-
connect the iPod while transferring song in-
formation to it, the transfer may not
complete.
pWhile the song information is stored in the
navigation system, transfer to iPod is not
possible.
Using advanced functions
%Touch on the Tunerscreen.
The Functionmenu appears.
En
88
Chapter
16 HD Radioreception
Using the touch panel keys
9
8
7
123
56
4
1Scans tracks of a CD
Scan play is performed by touching only one
key.
=For details of the operation, refer to
Scans tracks of a CD on the next page.
2Plays tracks in random order
All of the tracks in the disc can be played at
random by touching only one key.
=For details of the operation, refer to
Plays tracks in random order on the
next page.
3Sets a repeat play range
The repeat play range can be changed by
touching only one key.
=For details, refer to Changes the repeat
range on the next page.
4Selects a track to play
Scrolling the keys up or down displays tracks,
and tapping a track starts playback.
Tapping the lower key during random play-
back skips to the next track. Tapping the
upper key jumps to the start of the current
track.
5Recalls equalizer curves
=For details, refer to Using the equalizer
on page 183.
6Displays the Functionmenu
=For details, refer to Using advanced func-
tions on the next page.
7Playback and Pause
Touching [f] switches between playback
and pause.
8Selects a track from the list
Touching the key displays the list which lets
you see the list of track titles on a disc. You
can play a track on the list by tapping it.
p-------is displayed if there is no corre-
sponding information.
=For details, refer to Operating list screens
(e.g. iPod list screen) on page 74.
9Switches the media file type played
=For details, refer to Switches the
media file type played on page 97.
En
92
Chapter
17 Playing audio CDs
Operating by hardware
buttons
Pressing the TRK button
You can skip tracks forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
Using advanced functions
%Touch on the CDscreen.
The Functionmenu appears.
1 2 3 4
1Changes the repeat range
Each touch of [Repeat] changes the setting
as follows:
!Disc: Repeats the current disc.
!Track: Repeats just the current track.
pIf you perform track search or fast for-
ward or reverse, track repeat playback is
automatically canceled.
2Plays tracks in random order
Each touch of [Random] turns it on or off.
pIf you turn the random play on when the
repeat play range is set to Track, the
repeat play range changes to Disc
automatically.
3Scans tracks of a CD
Each touch of [Scan] turns it on or off. Scan
play lets you hear the first 10 seconds of
each track on the CD. When you find the
track you want, touch [Scan] to turn scan
play off.
pAfter scanning is finished, normal play-
back of the tracks will begin again.
pIf you turn the scan play on when the re-
peat play range is set to Track, the re-
peat play range changes to Disc
automatically.
4Uses Sound Retrieverfunction
Sound Retrieverfunction automatically
enhances compressed audio and restores
rich sound.
Each touch of [Sound Retriever] changes
the setting as follows:
!MODE 1: Activates Sound Retriever
function.
!MODE 2: Activates Sound Retriever
function.
!Off: Deactivates Sound Retriever
function.
pMODE 2has a stronger effect than
MODE 1and is more effective when
playing back highly compressed audio
data.
En 93
Chapter
17
Playing audio CDs
Playing audio CDs
You can play a disc that contains compressed
audio files using the built-in drive of the navi-
gation system. This section describes these
operations.
pIn the following description, the MP3,
WMA, AAC files are collectively referred to
as Compressed audio file.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 74.
2 Insert the disc you want to play into
disc-loading slot.
Playback starts from the first file of the ROM.
=For details, refer to Inserting and ejecting a
disc on page 17.
pIf the disc is already set, tap [Disc] on the
left edge of the screen.
=For details, refer to Selecting a source on
page 74.
3 Use the touch panel keys on the screen
to control the disc.
=For details concerning operations, refer to
Using the touch panel keys on page 96.
Reading the screen
1
23
4
5
1Source icon
Shows which source has been selected.
2Playback condition indicator
Indicates the current playback condition.
Scanning folders and files
Indicator Meaning
Cancels the scan play.
Plays the first audio files of each
folder for about 10 seconds
when the repeat range is set to
Disc.
Plays the beginning of each
audio file in the current folder
for about 10 seconds when the
repeat range is set to Folder.
Playing files in random order
Indicator Meaning
Does not play files in random
order.
Plays all audio files in the cur-
rent repeat play range in ran-
dom order.
Setting a repeat play range
Indicator Meaning
Repeats all compressed audio
files.
Repeats just the current file.
Repeats the current folder.
3Current file information
!:Folder name
Shows the folder name currently play-
ing.
!:Artist name
Shows the artist name currently playing
(when available).
!:Album title
Shows the title of the album of the cur-
rent file (when available).
!:Track title
Shows the title of the track currently
playing (when available).
pIf the title of a track is not available,
the file name appears.
!Play time
Shows the elapsed playing time within
the current file.
En
94
Chapter
18 Playing music files on ROM
=For details, refer to Operating list screens
(e.g. iPod list screen) on page 74.
Touching displays the content of the upper
folder (parent folder). If the uppermost folder
is listed, cannot be used.
9Switches the media file type played
When playing a disc containing a mixture of
various media file types, you can switch be-
tween media file types to play.
Tap the key repeatedly to switch between the
following media file types:
CD (audio data (CD-DA)) ROM (com-
pressed audio file) DivX (DivX video
files)
Operating by hardware
buttons
Pressing the TRK button
You can skip files forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
Using advanced functions
%Touch on the ROMscreen.
The Functionmenu appears.
1 2 3 4
1Changes the repeat range
Each touch of [Repeat] changes the setting
as follows:
!Disc: Repeats all compressed audio
files.
!Track: Repeats just the current file.
!Folder: Repeats the current folder.
pIf you select another folder during repeat
play, the repeat play range changes to
Disc.
pIf you perform fast reverse or fast for-
ward during Track, the repeat play
range changes to Folder.
pWhen Folderis selected, it is not pos-
sible to playback a subfolder of that
folder.
pWhen playing discs with compressed
audio files and audio data (CD-DA), re-
peat play is performed within the cur-
rently playing data session even if Disc
is selected.
2Plays files in random order
Each touch of [Random] turns it on or off.
When the random play is turned on, the
files in the current repeat play range are
randomly played.
pIf you turn the random play on when the
repeat play range is set to Track, the
repeat play range changes to Folder
automatically.
3Scans folders and files
Scan play lets you hear the first 10 seconds
of each file. Scan play is performed in the
current repeat play range.
Each touch of [Scan] turns it on or off.
When you find the file you want, touch
[Scan] to turn the scan play off.
pAfter completion of file or folder scan-
ning, normal playback of the files will
begin again.
pIf you turn the scan play on when the re-
peat play range is set to Track, the re-
peat play range changes to Folder
automatically.
pIf you turn the scan play on while the re-
peat play range is set to Disc, scan
play is performed for only the first file of
each folder.
4Uses Sound Retrieverfunction
Sound Retrieverfunction automatically
enhances compressed audio and restores
rich sound.
En 97
Chapter
18
Playing music files on ROM
Playing music files on ROM
Each touch of [Sound Retriever] changes
the setting as follows:
!MODE 1: Activates Sound Retriever
function.
!MODE 2: Activates Sound Retriever
function.
!Off: Deactivates Sound Retriever
function.
pMODE 2has a stronger effect than
MODE 1and is more effective when
playing back highly compressed audio
data.
En
98
Chapter
18 Playing music files on ROM
You can play a DVD-Video using the built-in
drive of the navigation system. This section de-
scribes operations for playing a DVD-Video.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 74.
2 Insert the disc you want to play into
disc-loading slot.
The source changes and then playback will
start.
=For details, refer to Inserting and ejecting a
disc on page 17.
pIf the disc is already set, tap [Disc] on the
left edge of the screen.
=For details, refer to Selecting a source on
page 74.
3 Use the touch panel keys on the screen
to control the disc.
=For details, refer to Using the touch panel
keys on the next page.
Reading the screen
b
1 5 6 72 3 4
a
8
9
1Title number indicator
Shows the title number currently playing.
2Audio track indicator
Shows the audio track number and audio lan-
guage currently selected.
3Chapter number indicator
Shows the chapter number currently playing.
4Audio channel indicator
Shows the current audio channel type, such
as Mch(Multi-channel).
5Subtitle number indicator
Shows the subtitle number currently selected.
6Subtitle language indicator
Shows the subtitle language currently se-
lected.
7Viewing angle indicator
Shows what viewing angle has been selected.
8Current time
9Digital sound format indicator
Shows which digital sound format (surround
sound format) has been selected.
aPlay time indicator
Shows the elapsed playing time within the
current title.
bSource icon
Shows which source has been selected.
En 99
Chapter
19
Playing a DVD-Video
Playing a DVD-Video
Using the touch panel keys
Playback screen (page 1)
7
a
9
8
b
654321
Playback screen (page 2) Playback screen (page 3)
g
f
e
dc jih
pWith some discs, the icon 9may be dis-
played, meaning that the operation is inva-
lid.
1Displays the Functionmenu
=For details, refer to Using advanced func-
tions on page 103.
2Recalls equalizer curves
=For details, refer to Using the equalizer
on page 183.
3Switches the display
Touching [Disp] changes the indication on the
information plate as follows:
Disc information display Repeat range and
L/R select display
4Switches to the next page of touch panel
keys
5Displays the DVD menu keypad
=For details, refer to Using DVD menu by
touch panel keys on page 102.
6Playback and Pause
Touching [f] switches between playback
and pause.
7Hides the touch panel keys and informa-
tion of the current video
Touching [Hide] shows only the current video.
pIf you want to display the touch panel
keys and information of the current
video again, touch anywhere on the LCD
screen.
En
100
Chapter
19 Playing a DVD-Video
You can bookmark one point for each of up to
five discs. If you try to memorize another point
for the same disc, the older bookmark will be
overwritten by the newer one.
pTo clear the bookmark on a disc, touch and
hold [BookM.].
Searching for a specific scene
and starting playback from a
specified time
You can search for the scene you want by spe-
cifying a title or a chapter, and the time.
pChapter search and time search are not
available when disc playback has been
stopped.
1 Touch [Search] and then touch [Title]
(title), [Chapter] (chapter), [Time] (time).
2 Touch the keys to input the target num-
ber or time and then touch [Enter].
For titles, chapters
!To select 3, touch [3] and [Enter] in order.
!To select 10, touch [1] and [0] and [Enter]in
order.
For time (time search)
!To select 5 minutes 3 seconds, touch [5],
[min], [3], [sec] and [Enter] in order.
!To select 71 minutes 00 seconds, touch [7],
[1], [min] and [Enter] in order.
!To select 100 minutes 05 seconds, touch
[1], [0], [0], [5], [sec] and [Enter] in order.
pTo cancel an input number, touch [Clear].
To cancel the input numbers, touch and
hold [Clear].
Direct number search
You can use this function when you need to
enter a numerical command during DVD play-
back.
1 Touch [Search].
2 Touch [10Key].
3 Touch [0] to [9] to input the desired
number.
4 While the input number is displayed,
touch [Enter].
Operating the DVD menu
You can operate the DVD menu by touching
the menu item on the screen directly.
pThis function can be used when the
key is displayed on the lower right corner of
the LCD screen.
pThis function may not work properly with
some DVD disc content. In that case, use
touch panel keys to operate the DVD menu.
pIf you touch the screen while is dis-
played, the touch panel keys will not be dis-
played.
1 Touch the screen to display the touch
panel keys.
2 Touch [Top Menu] or [Menu] to display
touch panel keys to operate the DVD
menu.
3 Touch the desired menu item.
#If you touch , the touch panel keys for
selecting the menu item are displayed.
Using DVD menu by touch
panel keys
If items on the DVD menu appear, the touch
panel keys may overlay them. If so, select an
item using those touch panel keys.
En
102
Chapter
19 Playing a DVD-Video
1 Touch [a], [b], [c]or[d] to select the
desired menu item.
pIf the touch panel keys for DVD menu selec-
tion disappear, touching anywhere on the
screen, then touch . The touch panel
keys are displayed again.
2 Touch [Enter].
Playback starts from the selected menu item.
The way to display the menu differs depending
on the disc.
#If you touch [Position], the display position of
touch panel keys is changed each time you touch
it.
#If you touch [Hide], the touch panel keys dis-
appear and the icon is displayed. You can
select a menu item by touching it.
Frame-by-frame playback
This lets you move ahead one frame at a time
during pause.
%Touch [r] during pause.
Each time you touch [r], you move ahead
one frame.
pTo return to normal playback, touch [f].
pWith some discs, images may be unclear
during frame-by-frame playback.
Slow motion playback
This lets you slow down playback speed.
1 Touch and hold [r] until is dis-
played during playback.
The icon is displayed, and forward slow
motion playback begins.
pTo return to normal playback, touch [f].
2 Touch [q]or[r] to adjust playback
speed during slow motion playback.
Each time you touch [q]or[r] it changes
the speed in four steps in the following order:
1/16 f1/8 f1/4 f1/2
pThere is no sound during slow motion play-
back.
pWith some discs, images may be unclear
during slow motion playback.
pReversed slow motion playback is not possi-
ble.
Operating by hardware
buttons
Pressing the TRK button
You can skip chapters forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
Using advanced functions
%Touch on the DVD-Vscreen.
The Functionmenu appears.
1 2 3
1Changes the repeat range
Each touch of [Repeat] changes the setting
as follows:
!Disc: Plays throughout the current disc.
!Chapter: Repeats just the current chap-
ter.
!Title: Repeats just the current title.
En 103
Chapter
19
Playing a DVD-Video
Playing a DVD-Video
pIf you perform chapter (title) search, fast
forward, fast reverse or slow motion
playback, the repeat play range changes
to Disc.
pThis function is not available when disc
playback has been stopped.
2Selects audio output
When playing DVDs recorded with LPCM
audio, you can switch the audio output.
Touch [L/R Select] repeatedly until the de-
sired audio output appears on the display.
Each touch of [L/R Select] changes the set-
tings as follows:
!L+R: Left and right
!L: Left
!R: Right
!Mix: Mixing left and right
pThis function is not available when disc
playback has been stopped.
3DVD setup adjustments
=For details, refer to Displaying DVD/
DivX® Setup menu on page 109.
En
104
Chapter
19 Playing a DVD-Video
Starting playback from a
specified time
You can search for a desired scene by specify-
ing the time.
pTime search are not possible when disc
playback has been stopped.
1 Touch [Search].
2 Touch the keys to input the target num-
ber or time and then touch [Enter].
!To select 5 minutes 3 seconds, touch [5],
[min], [3], [sec] and [Enter] in order.
!To select 71 minutes 00 seconds, touch [7],
[1], [min] and [Enter] in order.
!To select 100 minutes 05 seconds, touch
[1], [0], [0], [5], [sec] and [Enter] in order.
pTo cancel an input number, touch [Clear].
To cancel the input numbers, touch and
hold [Clear].
Operating by hardware
buttons
Pressing the TRK button
You can skip files forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
Using advanced functions
%Touch on the DivXscreen.
The Functionmenu appears.
1 2
1Changes the repeat range
Each touch of [Repeat] changes the setting
as follows:
!Disc: Plays throughout the current disc.
!File: Repeats just the current file.
!Folder: Repeats just the current folder.
pIf you select another folder during repeat
play, the repeat play range changes to
Disc.
pIf you perform fast reverse or fast for-
ward during File, the repeat play range
changes to Folder.
pWhen Folderis selected, it is not pos-
sible to playback a subfolder of that
folder.
pWhen playing discs with compressed
audio files and audio data (CD-DA), re-
peat play is performed within DivX vi-
deos even if Discis selected.
2DVD setup adjustments
=For details, refer to Displaying DVD/
DivX® Setup menu on the next
page.
En
108
Chapter
20 Playing a DivX video
Language code chart for DVDs
Two-letter
code,
input code
Language
Two-letter
code,
input code
Language
Two-letter
code,
input code
Language
aa, 0101 Afar ia, 0901 Interlingua rn, 1814 Rundi
ab, 0102 Abkhazian ie, 0905 Interlingue ro, 1815 Romanian
af, 0106 Afrikaans ik, 0911 Inupiaq ru, 1821 Russian
am, 0113 Amharic in, 0914 Indonesian rw, 1823 Kinyarwanda
ar, 0118 Arabic is, 0919 Icelandic sa, 1901 Sanskrit
as, 0119 Assamese it, 0920 Italian sd, 1904 Sindhi
ay, 0125 Aymara ja, 1001 Japanese sg, 1907 Sango
az, 0126 Azerbaijani ji, 1009 Yiddish sh, 1908 Serbo-Croatian
ba, 0201 Bashkir jw, 1023 Javanese si, 1909 Sinhala
be, 0205 Belarusian ka, 1101 Georgian sk, 1911 Slovak
bg, 0207 Bulgarian kk, 1111 Kazakh sl, 1912 Slovenian
bh, 0208 Bihari kl, 1112 Kalaallisut sm, 1913 Samoan
bi, 0209 Bislama km, 1113 Central Khmer sn, 1914 Shona
bn, 0214 Bengali kn, 1114 Kannada so, 1915 Somali
bo, 0215 Tibetan ko, 1115 Korean sq, 1917 Albanian
br, 0218 Breton ks, 1119 Kashmiri sr, 1918 Serbian
ca, 0301 Catalan ku, 1121 Kurdish ss, 1919 Swati
co, 0315 Corsican ky, 1125 Kirghiz; Kyrgyz st, 1920 Sotho, Southern
cs, 0319 Czech la, 1201 Latin su, 1921 Sundanese
cy, 0325 Welsh ln, 1214 Lingala sv, 1922 Swedish
da, 0401 Danish lo, 1215 Lao sw, 1923 Swahili
de, 0405 German lt, 1220 Lithuanian ta, 2001 Tamil
dz, 0426 Dzongkha lv, 1222 Latvian te, 2005 Telugu
ee, 0505 Ewe mg, 1307 Malagasy tg, 2007 Tajik
el, 0512 Greek mi, 1309 Maori th, 2008 Thai
en, 0514 English mk, 1311 Macedonian ti, 2009 Tigrinya
eo, 0515 Esperanto ml, 1312 Malayalam tk, 2011 Turkmen
es, 0519 Spanish mn, 1314 Mongolian tl, 2012 Tagalog
et, 0520 Estonian mo, 1315 Moldavian tn, 2014 Tswana
eu, 0521 Basque mr, 1318 Marathi to, 2015 Tonga
fa, 0601 Persian ms, 1319 Malay tr, 2018 Turkish
fi, 0609 Finnish mt, 1320 Maltese ts, 2019 Tsonga
fj, 0610 Fijian my, 1325 Burmese tt, 2020 Tatar
fo, 0615 Faroese na, 1401 Nauru tw, 2023 Twi
fr, 0618 French ne, 1405 Nepali uk, 2111 Ukrainian
fy, 0625 Western Frisian nl, 1412 Dutch; Flemish ur, 2118 Urdu
ga, 0701 Irish no, 1415 Norwegian uz, 2126 Uzbek
gd, 0704 Gaelic oc, 1503 Occitan vi, 2209 Vietnamese
gl, 0712 Galician om, 1513 Oromo vo, 2215 Volapuk
gn, 0714 Guarani or, 1518 Oriya wo, 2315 Wolof
gu, 0721 Gujarati pa, 1601 Panjabi; Punjabi xh, 2408 Xhosa
ha, 0801 Hausa pl, 1612 Polish yo, 2515 Yoruba
hi, 0809 Hindi ps, 1619 Pushto; Pashto zh, 2608 Chinese
hr, 0818 Croatian pt, 1620 Portuguese zu, 2621 Zulu
hu, 0821 Hungarian qu, 1721 Quechua
hy, 0825 Armenian rm, 1813 Romansh
En
112
Chapter
21 DVD-Video or DivX setup
Setting a repeat play range
Indicator Meaning
Repeats all compressed audio
files in the selected external sto-
rage device (USB, SD).
Repeats just the current file.
Repeats the current folder.
3Current file information
!:Folder name
Shows the folder name currently play-
ing.
!:Artist name
Shows the artist name currently playing
(when available).
!:Album title
Shows the title of the album of the cur-
rent file (when available).
!:Track title
Shows the title of the track currently
playing (when available).
pIf the title of a track is not available,
the file name appears.
!Play time
Shows the elapsed playing time within
the current file.
p-------is displayed if there is no corre-
sponding information.
4Current time
5File information
!File number indicator
!File name indicator
!File type indicator
Shows the type of audio files.
En
114
Chapter
22 Playing music files (from USB or SD)
This function shuffles songs or albums and
plays them in random order.
Each touch of [Shuffle] changes the setting
as follows:
!Off: Does not shuffle.
!Songs: Plays back songs or videos in
random order within the selected list.
!Albums: Selects an album randomly,
and then plays back all songs in that
album in order.
3Sets the audiobook play speed
While listening to an audiobook on iPod,
playback speed can be changed.
Each touch of [Audio Book] changes the
setting as follows:
!Normal: Playback in normal speed
!Faster: Playback faster than normal
speed
!Slower: Playback slower than normal
speed
4Plays video in wide screen mode
If the video is compatible with wide screen
format, set Widescreento Onin order
to view the video image in the wide screen.
Each touch of [Widescreen] changes the
setting as follows:
!On: Outputs the wide-screen video from
an iPod.
!Off: Outputs the normal-sized video
from an iPod.
pDisplay size is changed after you
change Widescreensetting and select
the video to play.
pThis setting is available only during the
video operation.
5Plays songs related to the currently
playing song
You can play songs related to the currently
playing song, using of the following lists.
!Link Artists: Songs related to the cur-
rently playing artist will be played in the
album order.
!Link Albums: Songs related to the cur-
rently playing album will be played.
!Link Genres: Songs related to the cur-
rently playing genre will be played in the
artist order.
6Selects the display language of the key-
board
You can select the display language of the
keyboard used in Advanced App Mode.
pThis setting is available only when you
change the screen of the navigation sys-
tem to the screen of the application for
iPhone.
En 131
Chapter
24
Using an iPod (iPod)
Using an iPod (iPod)
Starting procedure
The procedure varies depending on your type
of smartphone.
For Android device and
BlackBerry device users
1 Register the device in this navigation
system.
pWhen registering the device, you must se-
lect either Handsfree and Audioor
Audio.
pThe registered device must be selected as
the priority device.
=For details, refer to Registering your
Bluetooth devices on page 59.
2 Display the AV System Settings
screen.
=For details, refer to Displaying the screen for
AV system settings on page 178.
3 Touch [App Connection] and set to
Bluetooth.
pThis key is not available when an Aha Radio
source has already been selected.
4 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 74.
5 Tap [Pandora] or [aha] on the left side
of the screen to display Pandoraor aha
screen.
When you tap [Pandora]or[aha], the naviga-
tion system attempts to establish the
Bluetooth connection.
After the connection is successfully estab-
lished, the touch panel keys on the Pandora
or ahascreen are activated.
=For details, refer to Selecting a source on
page 74.
6 Use the touch panel keys on the screen
to control the Pandora or Aha Radio.
=For details, refer to Using Pandora®internet
radio on the next page.
=For details, refer to Using Aha Radio on
page 136.
For iPhone users
1 Display the AV System Settings
screen.
=For details, refer to Displaying the screen for
AV system settings on page 178.
2 Touch [App Connection] and set to
Wired.
pThis key is not available when an Aha Radio
source has already been selected.
3 Start up the Pandora or Aha application
installed on the iPhone.
pIn some iPhone modes, selecting a source
may start up an iPhone application. If the
message Please check your smartphone
screen when it is safe and lawful for you
to do so.appears, start up the application
from your iPhone.
pBefore starting up, sign-in to Pandora from
your iPhone.
4 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 74.
En 133
Chapter
25
Using smartphone applications
Using smartphone applications
5 Connect your iPhone.
The source changes and then playback will
start.
=For details, refer to Connecting your iPod on
page 22.
pIf the iPod is already connected, tap
[Pandora]or[aha] on the left edge of the
screen.
=For details, refer to Selecting a source on
page 74.
6 Tap [Pandora] or [aha] on the left side
of the screen to display Pandoraor aha
screen.
7 Use the touch panel keys on the screen
to control the Pandora or Aha Radio.
=For details, refer to Using Pandora®internet
radio on this page.
=For details, refer to Using Aha Radio on
page 136.
Using Pandora
®
internet radio
You can experience Pandora by connecting an
smartphone that has the Pandora application
installed.
Note:
!Certain functionality of the Pandora service is
not available when accessing the service
through the Pioneer navigation system, in-
cluding, but not limited to, creating new sta-
tions, deleting stations, emailing current
stations, buying songs from iTunes, viewing
additional text information, logging in to
Pandora, and adjusting Cell Network Audio
Quality.
!Pandora internet radio is a music service not
affiliated with Pioneer. More information is
available at
http://www.pandora.com
!To insure compatibility, install the latest ver-
sion of the Pandora®internet radio application
by navigating to
www.pandora.com on your mobile device.
Reading the screen
4
1
2
3
1Current song information
!Station name indicator
Shows the Pandora station name the
tuner is currently tuned in.
!:Artist name
Shows the artist name currently playing.
!:Album title
Shows the title of the album of the cur-
rent track.
!:Track title
Shows the title of the current track.
!Play time indicator
Shows the elapsed playing time within
the current track.
p-------is displayed if there is no corre-
sponding information.
2Current time
3Album artwork
Album art of the current track is displayed if it
is available.
4Source icon
Shows which source has been selected.
En
134
Chapter
25 Using smartphone applications
Using the touch panel keys
1
7
64 235
1Selects a Pandora station from the list
Touching the key displays the list of your
Pandora stations to select one of them to play.
=For details, refer to Operating list screens
(e.g. iPod list screen) on page 74.
Scroll the list by dragging items up or down to
display the item you want to select.
pTouching [QuickMix] plays only one
track based on particular musical char-
acteristics at a time from shuffled sev-
eral stations.
pStations indicated by are shared sta-
tions.
pEach time you touch [List] changes the
sort order.
Current order is indicated on the upper
right of the screen.
!:
You can sort the items in the list al-
phabetically.
!:
You can sort the items in the list in
order of dates the items were cre-
ated.
2Thumbs Up
Touching the key gives Thumbs Upto the
track currently playing.
pThis function is not available when
using a shared station.
3Thumbs Down
Touching the key gives Thumbs Downto the
track currently playing and skip to the next
track.
pThis function is not available when
using a shared station.
4Bookmark
Touching the key displays the screen which
lets you select the artist or track to add book-
marks.
5Connecting a registered Bluetooth device
manually
pThis is displayed when App Connec-
tionis set to Bluetooth.
=For details, refer to Starting procedure on
page 133.
En 135
Chapter
25
Using smartphone applications
Using smartphone applications
6Recalls equalizer curves
=For details, refer to Using the equalizer
on page 183.
7Playback and Pause
Touching [f] switches between playback
and pause.
Operating by hardware buttons
Pressing the TRK button
You can skip the track forward.
Using Aha Radio
When connecting iPod with the Aha Radio in-
stalled, you can control, view, and/or hear Aha
Radio content from this navigation system.
You can also display POI information from the
Aha Radio application on the map screen and
route to these POIs.
pFor details concerning operations, refer to
the Help and Tips section within the Aha
Radio application.
pAha Radio stations may require initial
setup or sign-in before the station can be
accessed.
Note:
!Certain functionality of the Aha Radio service
may not be available when accessing the ser-
vice through the Pioneer navigation system,
including, but not limited to, creating new
Aha stations, deleting Aha stations, recording
shoutsby voice, adjusting Aha Radio App
settings, logging into Facebook, creating a Fa-
cebook account, logging into Twitter, or creat-
ing a Twitter account.
!Aha Radio is a service not affiliated with
Pioneer. More information is available at
http://www.ahamobile.com.
!A specific version of the Aha Radio applica-
tion is required to be installed on your smart-
phone in order to enjoy Aha Radio content on
this navigation system.
!Because the application for the smartphone is
not provided by Pioneer, the required version
of the application may not yet be available at
the time of purchase of the navigation system.
Availability, version and update information
can be found at
http://www.pioneerelectronics.com/aharadio
Reading the screen
4
1
2
3
1Current station information
Shows which source has been selected.
!Station name
Shows the name of the Aha Radio sta-
tion that the navigation system is cur-
rently tuned to.
!Detailed information
Shows the information on the content
currently being played.
p-------is displayed if there is no
corresponding information.
!Rating information
Shows the rated value of the current
content displayed (only when and where
applicable).
2Current time
3Content image
Displays an image of the current content if
one is available.
4Source icon
Shows which source has been selected.
En
136
Chapter
25 Using smartphone applications
Using advanced functions
pThis menu is available only when the con-
nected Bluetooth audio player features
AVRCP 1.3.
%Touch on the Audioscreen.
The Functionmenu appears.
1 2
1Changes the repeat range
Each touch of [Repeat] changes the setting
as follows:
!All: Repeats all audio files in the
Bluetooth audio player.
!Track: Repeats just the current file.
!Off: Does not repeat.
pIf you skip the file forward or backward
when the repeat play range in Track,
the repeat play range changes to All.
2Plays files in random order
Random play lets you playback files in ran-
dom order within the current repeat range.
Each touch of [Random] turns it on or
off.
En
142
Chapter
26 Using the Bluetooth audio player
You can use the navigation system to control
an XM satellite digital tuner, which is sold se-
parately.
For details concerning operation, refer to the
XM tuners operation manuals. This section
provides information on XM operations with
the navigation system which differs from that
described in the XM tuners operation man-
ual.
The following XM satellite digital tuner units
cannot be connected:
GEX-P900XM, GEX-P910XM
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 74.
2 Tap [XM] on the left edge of the screen
to display the XMscreen.
3 Use the touch panel keys on the screen
to control the XM tuner.
=For details, refer to Using the touch panel
keys on page 145.
Reading the screen
All CH Mode
7
1
6
2
3
4
Category Mode
7
5
1
6
2
3
4
About the logo for channel name
Only the logo data that is contained in the na-
vigation system can be displayed for each
channel. The logo of a newly established chan-
nel that is not contained cannot be displayed.
When a logo is not available, the following
substitute icon is displayed.
Substitute icon
pThe icon of each broadcast station is con-
tained in the NAND flash memory based
on the data provided by XM Satellite Radio
as of October 2011.
pAny changes made by XM Satellite Radio
in the lineup or icon of the broadcast sta-
tion in the future may not be supported by
the navigation system, and may cause the
unit to display incorrect icons.
1XM band indicator
Shows the XM band that has been selected.
2Current XM station information
Shows the detailed information of the broad-
cast channel currently being received.
!XM channel number
Shows the XM channel number the
tuner is currently tuned to.
!:XM station name
Shows the XM broadcast station name
the tuner is currently tuned in.
!:Artist (performer) name
Shows the artist (performer) name cur-
rently playing (when available).
!:Song title (program name)
En 143
Chapter
27
Using the XM tuner
Using the XM tuner
Shows the title of the current song (pro-
gram).
p-------is displayed if there is no corre-
sponding information.
3Current time
4XM station information
!XM station name logo
!XM channel number
!Preset number
Shows what preset item has been se-
lected.
5XM channel category
Shows the category of broadcast channel.
6XM channel select mode indicator
Shows what channel select mode has been
selected. You can select a channel from all
channels in All CH Mode, and select a
channel from selected category in
Category Mode.
7Source icon
Shows which source has been selected.
En
144
Chapter
27 Using the XM tuner
You can use the navigation system to control a
Pioneer Sirius Satellite Radio tuner, which is
sold separately.
For details concerning operation, refer to the
SIRIUS tuners operation manuals. This sec-
tion provides information on SIRIUS opera-
tions with navigation system which differs
from that described in the SIRIUS tuners op-
eration manual.
pWhen you use the SiriusConnect universal
tuner (sold separately) with this navigation
system, Pioneer SIRIUS BUS INTERFACE is
required. For details concerning operation,
refer to the owners manual of Pioneer SIR-
IUS BUS INTERFACE and SiriusConnect
universal tuner.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 74.
2 Tap [SIRIUS] on the left edge of the
screen to display the SIRIUSscreen.
3 Use the touch panel keys on the screen
to control the SIRIUS tuner.
=For details, refer to Using the touch panel
keys on the next page.
Reading the screen
All CH Mode
8
7
1
6
2
3
4
Category Mode
8
7
1
6 5
2
3
4
1SIRIUS band indicator
Shows the SIRIUS band that has been se-
lected.
2SIRIUS channel number indicator
Shows the SIRIUS channel number that the
tuner is tuned to.
3Current time
4Preset number indicator
Shows what preset item has been selected.
5SIRIUS channel category
Shows the category of broadcast channel.
6SIRIUS channel select mode indicator
Shows what channel select mode has been
selected. You can select a channel from all
channels in All CH Mode, and select a
channel from the selected category in
Category Mode.
=For details concerning operations, refer
to Switches the SIRIUS channel se-
lect mode on page 151.
7Variable information area
Shows various information about the broad-
cast channel currently being received.
=For more details about the displayed in-
formation, refer to Switches the SIR-
IUS display on page 151.
8Source icon
Shows which source has been selected.
En 149
Chapter
28
Using the SIRIUS tuner
Using the SIRIUS tuner
Using the touch panel keys
All CH Mode
b
a
9
78
5
6
42 31
Category Mode
b
a
9
78
5
c6
42 31
1Switches the SIRIUS Instant replay mode
=For details, refer to Using the Instant
Replayfunction on page 152.
2Performs manual tuning
The channels move up or down one at a time.
pIf you keep touching [o]or[p] you
can skip the broadcasting channels.
3Selects a SIRIUS channel directly
=For details, refer to Selecting a SIRIUS
channel directly on the next page.
En
150
Chapter
28 Using the SIRIUS tuner
4Memorizes the current song
=For details, refer to Memorizing the song
on the next page.
5Recalls channels from the preset
Tap to recall the preset channel.
=For details, refer to Storing and recalling
broadcast stations on this page.
6Switches the SIRIUS display
Each touch of [Disp] changes the display in-
formation.
Channel number Channel name Chan-
nel category Artist name/feature Song/
program title Composer
7Recalls equalizer curves
=For details, refer to Using the equalizer
on page 183.
8Displays the Functionmenu
=For details, refer to Using advanced func-
tions on page 153.
9Switches the SIRIUS channel select
mode
You can switch the mode between the two
methods for selecting and listing the channel.
All CH Mode:
You can select a channel from all channels
when you operate this function.
Category Mode:
You can select a channel within a selected ca-
tegory that you operate this function.
aSwitches between the AV operation
screen and the preset list display
You can switch the screen display according
to your preference.
=For details of the operation, refer to
Switching between the AV operation
screen and the list screen on page 74.
bSelects a SIRIUS band
Tapping the key repeatedly switches between
the following SIRIUS bands: SIRIUS1,
SIRIUS2,orSIRIUS3.
pThis function is convenient for preparing
different preset lists for each band.
cSwitches the channel category
Touch [c]or[d] to select the desired cate-
gory.
Selecting a SIRIUS channel directly
You can select a SIRIUS channel directly by
entering the desired channel number.
1 Touch [Direct].
2 Touch [0] to [9] to input the desired
channel number.
To cancel the input numbers one by one,
touch . Touching and holding allows you
to delete all input numbers.
3 While the input number is displayed,
touch [Enter].
The SIRIUS channel that was entered se-
lected.
4 Touch .
You return to the previous display.
Display the Radio ID
If you select CH: 000, the Radio ID is dis-
played.
1 Touch [Direct].
2 Input [000] and then touch [Enter].
If you select another channel, display of the
Radio ID is canceled.
3 Touch .
You return to the previous display.
4 Wait until the Radio ID is displayed.
Storing and recalling broadcast
stations
With a tap of any of the preset tuning keys
(Preset 1to Preset 6), you can easily store
up to six broadcast stations for later recall
(also with the tap of a key).
1 Select the channel that you want to
store in memory.
2 Display the preset channel list.
=For details, refer to Switches between the
AV operation screen and the preset list
display on this page.
En 151
Chapter
28
Using the SIRIUS tuner
Using the SIRIUS tuner
Using the touch panel keys
13
4
5
6
2
1Recalls equalizer curves
=For details, refer to Using the equalizer
on page 183.
2Sends a band command
Touch to send a band command to the exter-
nal unit.
pOperation varies depending on the ex-
ternal unit connected. (In some cases,
the external unit may not respond.)
3Uses [F1] through [F4] to operate the ex-
ternal unit
The external unit can be operated by transmit-
ting the operating commands set to F1
through F4.
pThe operating commands set to F1
through F4vary depending on the ex-
ternal unit.
pSome functions may not be used until
you touch and hold the key.
4Switches between automatic and manual
function
You can turn automatic and manual function
on or off.
You can switch between Autoand
Manualfunctions of the external unit con-
nected.
Initially, this function is set to Auto.
pOperating commands set for Auto
and Manualoperations vary depend-
ing on the external unit connected.
5Sends a command [a], [b], [c], or [d]
Touch to operate the external unit.
pOperation varies depending on the ex-
ternal unit connected. (In some cases,
some functions may not be used until
you touch and hold the key.)
6Sends a [1] key to [6] key command
The external unit can be operated by transmit-
ting the operating commands set to 1key
through 6key.
pOperation varies depending on the ex-
ternal unit connected. (In some cases,
some functions may not be used until
you touch and hold the key.)
En 157
Chapter
30
Using the external unit (EXT1,EXT2)
Using the external unit (EXT1,EXT2)
Displaying the screen for
navigation settings
1 Press the HOME button to display the
Top Menuscreen.
2 Touch [Settings].
The Settings Menuscreen appears.
pThis can also be operated using the Short-
cut Menuscreen.
3 Touch [Navi Settings].
The Navi Settingsmenu appears.
4 Touch the item that you want to
change the setting.
#If you touch , the previous screen re-
turns.
Checking the connections
of leads
Check that leads are properly connected be-
tween the navigation system and the vehicle.
Please also check whether they are connected
in the correct positions.
1 Display the Navi Settingsscreen.
=For details, refer to Displaying the screen for
navigation settings on this page.
2 Touch [Connection Status].
The Connection Statusscreen appears.
2
3
4
5
1
1Speed Pulse
The Speed Pulse value detected by the navi-
gation system is shown. 0is shown while
the vehicle is stationary.
2GPS Antenna
Indicates the connection status of the GPS
antenna, the reception sensitivity, and from
how many satellites the signal is received.
Color Signal com-
munication
Used in posi-
tioning
Orange Yes Yes
Yellow Yes No
pWhen the GPS antenna is connected to
this navigation system, OKis dis-
played.
When the GPS antenna is not con-
nected to this navigation system, NOK
is displayed.
pIf reception is poor, please change the
installation position of the GPS antenna.
3Parking Brake
When the parking brake is applied, Onis
displayed. When the parking brake is re-
leased, Offis displayed.
4Illumination
When the headlights or small lamps of a ve-
hicle are on, Onis displayed. When the
small lamps of a vehicle are off, Offis dis-
played. (If the orange/white lead is not con-
nected, Offappears.)
5Back Signal
En
158
Chapter
31 Customizing preferences
When the shift lever is shifted to R, the
signal switches to Highor Low. (One of
these is displayed depending on the
vehicle.)
Checking sensor learning
status and driving status
pThe navigation system can automatically
use its sensor memory based on the outer
dimensions of the tires.
1 Display the Navi Settingsscreen.
=For details, refer to Displaying the screen for
navigation settings on the previous page.
2 Touch [3D Calibration Status].
The 3D Calibration Statusscreen appears.
2
3
4
5
1
6
7
1Speed
Indicates the speed detected by the naviga-
tion system. (This indication may be differ-
ent from the actual speed of your vehicle,
so please do not use this instead of the
speedometer.)
2Acceleration or deceleration/Rotational
speed
Indicates acceleration or deceleration velo-
city of your vehicle. Also, rotational speed
when your vehicle turns to left or right is
shown.
3Distance
Indicates driving distance.
4Speed Pulse
Indicates the total number of speed pulses.
5Learning Status
Indicates the current driving mode.
6Inclination
Indicates the degree of slope of the street
that you are currently on.
7Degree of learning
Sensor learning situations for distance
(Distance), right turn (Right Turn), left turn
(Left Turn) and 3D detection (3D) are indi-
cated by the length of bars.
pWhen tires have been changed or
chains fitted, turning on the Speed
Pulse allows the system to detect the
fact that the tire diameter has changed,
and automatically replaces the value for
calculating distance.
pIf a separately sold speed pulse genera-
tor (ND-PG1) is connected, the distance
calculation value cannot be replaced
automatically.
Clearing status
You can delete the learned results stored in
Distance,Speed Pulseor Learning Sta-
tus.
1 Touch [Distance] or [Speed Pulse].
The following message appears.
2 Touch [Yes].
Clears the results stored in Distanceor
Speed Pulse.
3 Touch [Learning Status].
The following message appears.
En 159
Chapter
31
Customizing preferences
Customizing preferences
If there are detailed categories within the sub-
category, [Detail] is active. If you select the
subcategory such, all detailed categories with-
in the subcategory is selected and [Detail] be-
comes inactive.
#If you touch [Detail], the detailed categories
under the subcategory are displayed. Select a de-
tailed category of your preference and touch
[OK].
pWhen only a few detailed categories are se-
lected, a blue check mark will appear next
to the selected subcategory.
7 Touch [OK].
The Overlay POI (Main Category)screen
returns.
If you want to select or deselect other items,
repeat these steps as many as necessary.
8 To finish the selection, touch [OK] in
the Overlay POI (Main Category)screen.
Displaying the customized POIs
Creating a customized POI is possible by
using the utility program AVIC FEEDS which is
available separately, on your PC. (AVIC FEEDS
will be available on our website.) Storing the
customized POI properly and inserting the SD
memory card enables the system to display
the icons on the map screen.
pYou can select up to 10 items from the sub-
categories or detailed categories.
1 Insert an SD memory card into the SD
card slot.
=For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 18.
2 Display the Map Settingsscreen.
=For details, refer to Displaying the screen for
map settings on page 164.
3 Touch [Overlay POI].
The Overlay POIscreen appears.
4 Touch [Display] to change the setting to
On.
pIf you do not want to display the POI icon
on the map, touch [Display] to turn it
Off. (Even if Displayis turned Off,
the POI selection setting is retained.)
5 Touch [Custom POI].
The list of POI categories appears.
6 Touch the items you want to display.
7 To finish the selection, touch [OK].
Changing the view mode
Various types of screen displays can be se-
lected for navigation guidance.
=For details of the operation, refer to Switch-
ing the view mode on page 34.
Setting the map color change
between day and night
To improve the visibility of the map during the
evening, you can set the timing for changing
the combination of the map color.
En 169
Chapter
31
Customizing preferences
Customizing preferences
1 Display the Map Settingsscreen.
=For details, refer to Displaying the screen for
map settings on page 164.
2 Touch [Day/Night Display].
Each time you touch the key changes the set-
ting.
!Automatic (default):
You can change the colors of a map be-
tween daytime and nighttime according to
whether the vehicle lights are on or off.
!Day:
The map is always displayed with daytime
colors.
pTo use this function with Automatic, the
orange/white lead of the navigation system
must be connected correctly.
Changing the road color
You can set the road color to bluish or reddish.
1 Display the Map Settingsscreen.
=For details, refer to Displaying the screen for
map settings on page 164.
2 Touch [Road Color].
Each time you touch the key changes the set-
ting.
!Blue (default):
Changes to blue based road colors.
!Red:
Changes to red based road colors.
Changing the setting of
navigation interruption screen
You can set whether to automatically switch to
the navigation screen from the AV screen
when your vehicle approaches a guidance
point such as an intersection.
1 Display the Map Settingsscreen.
=For details, refer to Displaying the screen for
map settings on page 164.
2 Touch [AV Guide Mode].
Each time you touch the key changes the set-
ting.
!On (default):
Switches from the AV operation screen to
the map screen.
!Off:
Does not switch the screen.
pThis setting is effective only when Close
Up Viewis set to On.
Selecting the Quick Access
menu
Select items to display on the map screen. In
the list displayed on screen, the items with red
checks are displayed on the map screen.
Touch the item you want to display and then
touch [OK] when a red check appears. You
can select up to five items.
1 Display the Map Settingsscreen.
=For details, refer to Displaying the screen for
map settings on page 164.
2 Touch [Quick Access Selection].
The Quick Access Selectionscreen appears.
3 Touch the item that you want to set in
Quick Access.
You can select the following items:
pSettings marked with an asterisk (*) show
that these are default or factory settings.
!:Registration*
Register information on the location indi-
cated by the cursor to Favorites.
=For details, refer to Registering a location
by scroll mode on page 50.
!:Vicinity Search*
Find POIs (Points Of Interest) in the vicinity
of the cursor.
=For details, refer to Searching for a nearby
POI on page 41.
!:Overlay POI*
Displays icons for surrounding facilities
(POI) on the map.
En
170
Chapter
31 Customizing preferences
Setting for rear view camera
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC5). (For de-
tails, consult your dealer.)
Rear view camera
The navigation system features a function that
automatically switches to the full-screen
image of the rear view camera installed on
your vehicle. When the shift lever is in the RE-
VERSE (R) position, the screen automatically
switches to full-screen rear view camera
image.
Camera for Rear view mode
Rear view can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please be aware that with this set-
ting, camera image is not resized to fit, and
that a portion of what is seen by the camera is
not viewable.
=For details, refer to Setting for rear view
camera on this page.
CAUTION
Pioneer recommends the use of a camera which
outputs mirror reversed images, otherwise the
screen image may appear reversed.
pImmediately verify whether the display
changes to a rear view camera image when
the shift lever is moved to REVERSE (R)
from another position.
pWhen the screen changes to full-screen
rear view camera image during normal
driving, switch to the opposite setting in
Polarity.
1 Display the System Settingsscreen.
=For details, refer to Displaying the screen for
system settings on page 171.
2 Touch [Back Camera].
The Back Camera Settingsscreen appears.
3 Touch [Camera].
This changes the setting to On.
pYou can only switch to Rear Viewif this
setting is On.
4 Touch [Polarity] to select an appropriate
setting for polarity.
Each time you touch [Polarity] switches be-
tween the following polarity:
!Battery: When the polarity of the con-
nected lead is positive while the shift lever
is in the REVERSE (R) position
!GND: When the polarity of the connected
lead is negative while the shift lever is in
the REVERSE (R) position
Adjusting the response
positions of the touch panel
(touch panel calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel screen.
pDo not use a sharp pointed tool such as a
ballpoint pen or a mechanical pen, which
could damage the screen.
1 Display the System Settingsscreen.
=For details, refer to Displaying the screen for
system settings on page 171.
2 Touch [Screen Calibration].
A message confirming whether to start the ca-
libration appears.
3 Gently touch the center of + mark dis-
played on the screen.
The target indicates the order.
After you touch all marks, the adjusted posi-
tion data is saved.
pDo not turn off the engine while saving the
adjusted position data.
#If you press the MODE button, the previous
adjustment position returns.
#If you press and hold the MODE button, the
adjustment is canceled.
En 175
Chapter
31
Customizing preferences
Customizing preferences
2 Touch [Mute Level].
Each touch of [Mute Level] changes the set-
tings as follows:
!20dB: The volume becomes 1/10.
!10dB: The volume becomes 1/3.
!All: The volume becomes 0.
pWhen you select All, no audio adjust-
ments are possible during the sound is
turned off.
pWhen you select 20dBor 10dB,no
audio adjustments are possible during the
sound is attenuated.
pAV source volume returns to normal when
the corresponding action ends.
pEven when a mute signal has been received
from MUTE lead connected to the naviga-
tion unit, navigation voice guidance cannot
be attenuated or muted.
Acquiring/Cataloging iPod
music information
pThis function is available for AVIC-Z140BH
only.
If you always set the language other than US
Englishon Voice Language, this setting is
unnecessary.
Unless VR Catalog Modeis turned off, this
navigation system tries to acquire the informa-
tion needed to operate iPod with voice com-
mands. It may take a short period of time to
transfer the information. Change the setting
according to your usage.
The navigation system starts acquiring/catalo-
ging music information (1) when the iPod is
connected or when the system boots up while
the iPod is connected and (2) when iPod is the
selected and displayed AV Source, unless VR
Catalog Modeis turned off.
pThis function is available when Change
Control Modeis set to Navi.
pIf you do not use iPod, this setting is un-
necessary.
pDuring transfer, the following iPod opera-
tions are not available.
Setting the shuffle play for music
Displaying the top category menu
Switching the operation screen
pOnce the cataloging is completed, you can
deactivate VR Catalog Menuuntil you
update the content/data on iPod. If you up-
date the iPod data, activate VR Catalog
Menuagain to transfer the music infor-
mation and synchronize the music informa-
tion for voice commands with the data on
iPod.
pAfter you select Offin VR Catalog
Mode, the system doesnt catalog the
data on the iPod. In such case, the pre-
viously cataloged data are available as
voice commands.
pOnce you start the cataloging process, only
a few basic voice commands can be used
for iPod until the process has completely
finished.
pIf unreadable characters are included in
the data on your iPod, names or types may
not be available as voice commands.
Important Notice regarding Voice
Control for iPods
Voice Control for iPods may be limited if cata-
loging of iPod content is not completed. Cata-
loging of iPod content only occurs when the
system is in AV Source & Contentsmode
and the iPodis the selected and AV
Sourcescreen displayed. Cataloging of iPod
content will not occur if the system is off, if
any other AV Source & Contentsis selected
(aside from iPod), or if the system is in any
other mode (aside from AV Source & Con-
tentsmode) such as Destination Menu,
Settings Menu,Phone Menuor the map
screen. If you wish to use Voice Control for all
iPod content, it is recommended that you first
connect your iPod, select iPodas the AV
source, and keep the iPod screen displayed
until cataloging is completed. Cataloging of
iPod content should only take a few minutes,
and will depend on the size of the content
stored on your iPod. A message will be dis-
played when cataloging is complete.
En 181
Chapter
31
Customizing preferences
Customizing preferences
1 Display the AV System Settings
screen.
=For details, refer to Displaying the screen for
AV system settings on page 178.
2 Touch [VR Catalog Menu].
3 Touch [On] or [Off] to activate or deacti-
vate VR Catalog Mode.
#If you touch [Pause], the cataloging of iPod
stops.
If you want to restart the cataloging of iPod,
touch [Restart].
Displaying your DivX VOD
registration code
In order to play DivX VOD (video on demand)
content on this navigation system, you first
need to register the unit with your DivX VOD
content provider. You do this by generating a
DivX VOD registration code, which you submit
to your provider.
pThis feature is available when the selected
source is CD,ROM,DivX,orDVD-V.
1 Display the AV System Settings
screen.
=For details, refer to Displaying the screen for
AV system settings on page 178.
2 Touch [DivX® VOD].
The screen where you can choose to display a
registration code or deregistration code is dis-
played.
pIf a registration code has already been acti-
vated, it cannot be displayed.
3 Touch [Registration Code].
Your 10-digit registration code is displayed.
pMake a note of the code as you will need it
when you register with a DivX VOD provider.
Displaying your DivX VOD
deregistration code
A registration code registered with a deregis-
tration code can be deleted.
pThis feature is available when the selected
source is CD,ROM,DivX,orDVD-V.
1 Display the AV System Settings
screen.
=For details, refer to Displaying the screen for
AV system settings on page 178.
2 Touch [DivX® VOD].
The screen where you can choose to display a
registration code or deregistration code is dis-
played.
pIf a registration code has not been acti-
vated, the deregistration code is not dis-
played.
3 Touch [Deregistration Code].
Your 8-digit deregistration code is displayed.
pMake a note of the code as you will need it
when you deregister with a DivX VOD provi-
der.
Selecting the smartphone
connection method
In order to use the smartphone application on
this navigation system, you need to select the
method for connecting your smartphone.
=For details, refer to Starting procedure on
page 133.
Displaying the screen for
AV sound settings
1 Press the HOME button to display the
Top Menuscreen.
2 Touch [Settings].
The Settings Menuscreen appears.
En
182
Chapter
31 Customizing preferences
1 Display the AV Sound Settings
screen.
=For details, refer to Displaying the screen for
AV sound settings on page 182.
2 Touch [EQ].
3 Touch one of the keys to select a curve
that you want to use as the basis of custo-
mizing.
4 Touch [Customize].
5 Touch the frequency that you want to
adjust the level.
6 Touch [a]or[b] to adjust the level of
the equalizer band.
Each time you touch [a]or[b], the level of
the equalizer band increases or decreases.
Using the auto-adjusted equalizer
You can set the auto-adjusted equalizer to suit
the vehicles acoustics. To use this function,
the vehicles acoustics must be measured in
advance.
=For details of the operations, refer to Adjust-
ing the equalizer curve automatically (Auto
EQ) on this page.
pTo manually adjust the equalizer curve, set
Auto EQto Off.
1 Display the AV Sound Settings
screen.
=For details, refer to Displaying the screen for
AV sound settings on page 182.
2 Touch [EQ].
3 Touch the key next to Auto EQto
turn the auto-adjusted equalizer on or off.
4 Select the equalizer curve.
Adjusting the equalizer curve
automatically (Auto EQ)
By measuring the vehicles acoustics, the
equalizer curve can be adjusted automatically
to suit the interior of the vehicle.
WARNING
A loud tone (noise) may be emitted from the
speakers when measuring the vehicles acous-
tics. Never perform the Auto EQ measurement
while driving.
CAUTION
!Thoroughly check the conditions before per-
forming Auto EQ, as the speakers may be da-
maged if this is performed under the following
conditions:
When the speakers are incorrectly con-
nected. (For example, when a rear speaker
is connected as a subwoofer output.)
When a speaker is connected to a power
amp delivering output higher than the
speakers maximum input power capabil-
ity.
!If the microphone for acoustical measure-
ment (sold separately) is not placed in an ap-
propriate location, the measurement tone may
become loud and measurement may take a
long time, resulting in battery drainage. Be
sure to place the microphone in the specified
location.
Before operating the Auto EQ function
!Perform Auto EQ in as quiet a place as pos-
sible, with the vehicle engine and air condi-
tioning switched off. Also, cut power to car
phones or cellular phones in the vehicle, or
remove them from the vehicle before per-
forming Auto EQ. Sounds other than the
measurement tone (surrounding sounds,
engine sound, telephones ringing, etc.)
may prevent correct measurement of the
vehicles acoustics.
En 185
Chapter
31
Customizing preferences
Customizing preferences
!Be sure to perform Auto EQ using the mi-
crophone for acoustical measurement
(sold separately). Using another micro-
phone may prevent measurement, or result
in incorrect measurement of the vehicles
acoustics.
!To perform Auto EQ, the front speakers
must be connected.
!When this navigation system is connected
to a power amp with input level control,
Auto EQ may not be able to be performed if
the power amps input level is set below
the standard level.
!When this navigation system is connected
to a power amp with an LPF, turn the LPF
off before performing Auto EQ. Also, set
the cut-off frequency for the built-in LPF of
an active subwoofer to the highest fre-
quency.
!The distance has been calculated by com-
puter to provide the optimum delay to en-
sure accurate results. Do not change this
value.
The reflected sound within the vehicle is
strong and delays occur.
The LPF on active subwoofers or exter-
nal amps delay the lower sounds.
!If an error occurs during measurement, a
message appears and measurement is
canceled. Check the following before mea-
suring the vehicles acoustics.
Front speakers (left/right)
Rear speakers (left/right)
Noise
Microphone for acoustical measure-
ment (sold separately)
Low battery
Performing Auto EQ
pAuto EQ changes the audio settings as fol-
lows:
!Auto EQon the EQ Menuscreen is
set to On.
=For details, refer to Using the auto-ad-
justed equalizer on the previous
page.
!The fader/balance settings return to the
center position.
=For details, refer to Using balance ad-
justment on page 183.
!The equalizer curve switches to Flat.
=For details, refer to Using the equali-
zer on page 183.
!The front and rear speakers will automa-
tically be adjusted to a high pass filter
setting.
pPrevious settings for Auto EQ will be over-
written.
pFor AVIC-Z140BH users
Do not press the hbutton to open or close
the panel when you are using the micro-
phone.
1 Stop the vehicle in a place that is quiet,
close all the doors, windows and sun roof,
and then turn the engine off.
If the engine is left running, engine noise may
prevent correct Auto EQ.
pIf driving restrictions are detected during
measurement, measurement is canceled.
2 Fix the microphone for acoustical mea-
surement (sold separately) in the center of
the headrest of the drivers seat, facing for-
ward.
The Auto EQ may differ depending on where
you place the microphone. If desired, place
the microphone on the front passenger seat
and perform Auto EQ.
3 Turn the ignition switch to ON or ACC.
If the vehicles air conditioner or heater is
turned on, turn it off. Noise from the fan in the
air conditioner or heater may prevent correct
Auto EQ.
En
186
Chapter
31 Customizing preferences
4 Switch the AV source to Off.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 74.
5 Set the video setting for the rear dis-
play to Mirror AV.
=For details of the operations, refer to Select-
ing the video for rear display on page 177.
6 Display the AV System Settings
screen.
=For details, refer to Displaying the screen for
AV system settings on page 178.
7 Touch [Auto EQ Meas.].
The Auto EQ Measurementscreen ap-
pears.
8 Plug the microphone into the mini-jack
connector.
USB and mini-jack connector
Microphone for acoustical measurement (sold sepa-
rately)
9 Touch [Start].
A 10-second countdown starts.
10 Exit the vehicle and keep the door
closed until the countdown finishes.
When the countdown is over, a measurement
tone (noise) is emitted from the speakers and
the Auto EQ measurement begins.
11 Wait until the measurement is com-
pleted.
When Auto EQ is completed, a message is dis-
played indicating that the measurement is
completed.
pIf the vehicles acoustics cannot be mea-
sured correctly, an error message will be
displayed.
pThe measurement time varies depending
on the type of vehicle.
pTo stop the measurement, touch [Stop].
12 Touch [OK].
13 Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sun-
light for an extended period of time, high tem-
peratures may cause distortion, color change
or malfunction.
Using sonic center control
Sound that is suited for the listening position
can easily be created with this function.
1 Display the AV Sound Settings
screen.
=For details, refer to Displaying the screen for
AV sound settings on page 182.
2 Touch [Sonic Center Control].
3 Touch [c]or[d] to select a listening po-
sition.
pThe larger the value of the range: Left7to
Right7setting, the greater the delay of
the speaker output.
pWhen Leftis set, the left speaker output
is delayed. When Rightis set, the right
speaker output is delayed.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Display the AV Sound Settings
screen.
=For details, refer to Displaying the screen for
AV sound settings on page 182.
2 Touch [Loudness].
Each time you touch [Loudness], the level is
selected in the following order:
Off Low Mid High
En 187
Chapter
31
Customizing preferences
Customizing preferences
!EXT1 and EXT2
pThe different source volume level can be set
between iPod and USB.
Enhancing bass (Bass Booster)
You can enhance bass sounds that are often
muted by driving noise.
1 Display the AV Sound Settings
screen.
=For details, refer to Displaying the screen for
AV sound settings on page 182.
2 Touch [Bass Booster].
3 Touch [+] or [] to adjust the range from
0to6.
Replicating the settings
You can import settings you have made on the
utility program AVIC FEEDS which is available
separately to the navigation system.
1 Use AVIC FEEDS to replicate the set-
tings and store them on an SD memory
card.
2 Insert an SD memory card into the SD
card slot.
=For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 18.
3 Press the HOME button to display the
Top Menuscreen.
4 Touch [Settings].
The Settings Menuscreen appears.
5 Touch [Setting Replicator].
A message confirming whether to update the
settings appears.
6 Touch [Yes].
Update starts.
After the settings are updated, a message con-
firming whether to restart the navigation sys-
tem appears.
7 Touch [OK].
The navigation system restarts.
Turning off the screen
By turning off the backlight of the LCD screen,
you can turn off the screen display without
turning off the voice guidance.
1 Press the HOME button to display the
Top Menuscreen.
2 Touch [Settings].
The Settings Menuscreen appears.
3 Touch [Screen Off].
The screen is turned off.
pTouch anywhere on the screen to turn it
back on.
En 189
Chapter
31
Customizing preferences
Customizing preferences
pThis function is available for AVIC-Z140BH
only.
To Ensure Safe Driving
CAUTION
For your safety, avoid viewing the screen in the
voice operation as much as possible while
driving.
If you use voice operation, select US English
or US English (Samantha):TTSin Voice
Languageof Regional Settings. If you se-
lect other languages, voice operation will not
be available.
Basics of the voice operation
Your Pioneer navigation system uses the latest
in voice recognition technology. You can use
voice commands to operate many of its func-
tions. This chapter describes where you can
use voice commands, and also what com-
mands the system accepts.
You can use voice commands to operate the
following functions:
!Hands-free phoning
!Switching the AV source
!Operating the iPod
pThis function is not available while catalo-
ging of iPod is in progress.
Flow of the voice operation
You can start the voice operation any time
even when the map screen is displayed or AV
is operating. (Some operations are not avail-
able.) The basic steps of the voice operations
are as follows.
1Switch the screen to map screen or AV op-
eration screen.
j
2Press the button to activate voice oper-
ations.
j
3Speak a command into the microphone
after the beep.
When the command is recognized, the na-
vigation system displays next options on
the screen, and pronounces it in some
cases.
j
4Repeat previous step as necessary.
j
5The requested operation will be carried out.
pThe voice operation may not be operable for a
minute after the navigation system has booted
up.
pThe voice operation will be activated 30 sec-
onds after the map screen is displayed.
If the button does not respond, display the
disclaimer screen and then touch [OK]. The
map screen is displayed.
Starting the voice operation
%Press the button when the map
screen or the AV operation screen is dis-
played.
The voice operation screen appears.
1
2
3
4
1Voice help menu
Displays a list of commands for the voice
operation.
En
190
Chapter
32 Operating your navigation system with voice
2Voice operation condition indicator
When is indicated, the navigation sys-
tem can recognize your voice commands.
3
Touch to listen to the brief operating in-
struction.
4
Touch to cancel the voice operation.
pYou can cancel the voice operation feature
at any time by saying Cancel. After you
cancel voice operations, the display returns
to the screen displayed before the voice op-
eration screen appeared.
How to use the voice operation
Calling the entry on the phone book
A method for dialing the entry named Nancy
is described here along with an operational ex-
ample.
1 Press the MODE button to display the
map screen or the AV operation screen.
2 Press the button to activate voice
operations.
3 Say Call Nancyto make a call.
A message confirming whether to dial appear-
s.
4 Say Yes.
Dialing starts.
Operating iPod by voice
You can play music using voice operation from
the iPod connected to the navigation system.
pTo use the content/data on the iPod for
voice operation, transfer the data to this
system first.
=For details, refer to Acquiring/Cataloging
iPod music information on page 181.
Examples of voice operation of the iPod are
shown below. (A method for playing the album
title named Pioneeris described here, along
with an operational example.)
1 Press the MODE button to display the
map screen or the AV operation screen.
2 Press the button to activate voice
operations.
3 Say Change Sourceto display the AV
source selection screen.
4 Say iPodon the selection screen to
switch the AV source to iPod.
pTouching the item on the screen also en-
ables you to select the desired AV source.
5 Press the button to activate voice
operations.
6 Say Play the album Pioneerto play-
back the album name Pioneer.
If the command is recognized properly, play-
back starts from the first song of Pioneer.
En 191
Chapter
32
Operating your navigation system with voice
Operating your navigation system with voice
Available basic voice commands
The navigation system can also recognize the words in the following list.
pTerms written in italics are voice commands.
Basic commands
Voice commands and operations
Back dThe previous screen returns.
Cancel dCancels the voice operation.
Help dOutputs the brief operating instruction by voice.
Next page,Previous page dSwitches the page.
Last page,First page dSwitches to the last or first page.
Voice operation for the iPod
For <Artist name>, <Album name>, <Playlist name>, <Genre name> shown on the following chart, say the
name stored in the iPod.
pPlayback of iPod movies is not available using voice commands.
Voice commands and operations
Shuffle play dPlays all songs randomly.
Resume dResumes the song or the video currently playing.
Pause dPauses the song or the video currently playing.
Next song dPlays the next song.
Previous song dPlays the previous song or returns to the beginning of the song currently playing.
Play artists dDisplays the artist list dSay the artist name that you want to play.
Play the artist <Artist name> dStarts playback from the top of the selected artist.
Play albums dDisplays the album list dSay the album title that you want to play.
Play the album <Album name> dStarts playback from the top of the selected album.
Play playlists dDisplays the playlist dSay the playlist that you want to play.
Play the playlist <Playlist name> dStarts playback from the top of the selected playlist.
Play genres dDisplays the genre list dSay the genre that you want to play.
Play the genre <Genre name> dStarts playback from the top of the selected genre.
Browse artists dDisplays the artist list together with sub-screen to continue the voice operation. dSay desired
voice commands.
Browse the artist <Artist name> dDisplays the album list of the selected artist together with sub-screen to con-
tinue the voice operation. dSay desired voice commands.
Browse albums dDisplays the album list together with sub-screen to continue the voice operation. dSay the de-
sired voice commands.
Browse the album <Album name> dDisplays the song list of the selected album. dTap the song that you want to
play.
En
192
Chapter
32 Operating your navigation system with voice
Voice commands and operations
Browse playlists dDisplays the playlist together with sub-screen to continue the voice operation. dSay the desired
voice commands.
Browse the playlist <Playlist name> dDisplays the song list of the selected playlist. dTap the song that you want
to play.
Browse genre dDisplays the genre list together with sub-screen to continue the voice operation. dSay the desired
voice commands.
Browse the genre <Genre name> dDisplays the song list of the selected genre list. dTap the song that you want
to play.
Play more music artist dPlays the songs related to the currently playing artist.
Play more music album dPlays the songs related to the currently playing album.
Play more music genre dPlays the songs related to the currently playing genre.
Next page,Previous page dDisplays the previous or next page of the selection list. (*1)
First page,Last page dDisplays the first or last page of the selection list. (*1)
(*1) Voice commands are available only when the selection list is displayed.
Voice operation for AV source (other than iPod)
AV source selection
Voice commands and operations
Change Source to DISC dSwitches the AV source to Disc.
Change Source to Tuner dSwitches the AV source to Tuner.
Change Source to XM Satellite Radio dSwitches the AV source to XM.
Change Source to SIRIUS Satellite Radio dSwitches the AV source to SIRIUS.
Change Source to SD dSwitches the AV source to SD.
Change Source to USB dSwitches the AV source to USB.
Change Source to iPod dSwitches the AV source to iPod.
Change Source to Bluetooth Audio dSwitches the AV source to Audio (Bluetooth audio).
Built-in DVD drive, external storage device (USB, SD)
Voice commands and operations
Shuffle play dPlays all songs randomly.
Pause dPauses the track or file currently playing.
Resume dResumes the track or file currently playing.
Next song dPlays the next track or file.
Previous song dPlays the previous track or file, or returns to the beginning of the track or file currently playing.
En 193
Chapter
32
Operating your navigation system with voice
Operating your navigation system with voice
Voice commands related to hands-free phoning
pYou can make a phone call by voice dialing if the cellular phone featuring Bluetooth wireless technology is being
paired with the navigation system.
pFor <entrys name> shown on the following chart, say the name of the entry stored in Contacts.
pFor <phone number> shown on the following chart, say the desired phone number.
Voice commands and operations
Call <entrys name> dMakes a call to the entry (*2).
Call <entrys name> general dDisplays the message confirming whether to dial dSay Yes dDials the general
phone number of the entry (*3).
Call <entrys name> mobile dDisplays the message confirming whether to dial dSay Yes dDials the cellular
phone number of the entry (*3).
Call <entrys name> home dDisplays the message confirming whether to dial dSay Yes dDials the home
phone number of the entry (*3).
Call <entrys name> work dDisplays the message confirming whether to dial dSay Yes dDials the office phone
number of the entry (*3).
Call <entrys name> other dDisplays the message confirming whether to dial dSay Yes dDials the other phone
number of the entry (*3).
Call <phone number> dDisplays the message confirming whether to dial dSay Yes dDials the phone number.
Make a call dSay the phone number you want to call dDisplays the message confirming whether to dial dSay
Yes dThe system starts dialing to the number.
Make a call dSay the name of entry stored on Contactsyou want to call dDisplays the message confirming
whether to dial dSay Yes dThe system starts dialing to the number (*2).
List outgoing calls dDisplay the list of recent outgoing calls (Dialed Calls) to select the number and call (*4).
List recent calls dIncoming calls dDisplay the list of recently received calls (Received Calls) to select the num-
ber and call (*4).
List recent calls dOutgoing calls dDisplay the list of recent outgoing calls (Dialed Calls) to select the number
and call (*4).
List recent incoming calls dDisplay the list of recently received calls (Received Calls) to select the number and
call (*4).
(*2) If the entry has multiple phone number data, selection list may appear. In such case, say the type of phone
number.
(*3) If there is no corresponding type on the entry, the system may suggest you other phone numbers of the entry. In
such case, say the type of phone number.
(*4) Touching the item on the screen also enables you to select the desired list.
Tips for the voice operation
For your voice commands to be correctly re-
cognized and interpreted, ensure that condi-
tions are suitable for recognition.
Close the vehicle windows
Please note that wind through the vehicle win-
dow or miscellaneous noise from outside the
vehicle can interfere with voice operation.
En
194
Chapter
32 Operating your navigation system with voice
Returning the navigation
system to the default or
factory settings
You can return settings or recorded content to
the default or factory settings. There are some
methods to clear user data, and the situations
and the cleared content are different for each
method. For information regarding the content
that is cleared by each method, see the list
presented later.
Method 1: Remove the vehicle battery
This transforms the system into the same
state as when the navigation system is unin-
stalled.
Method 2: Touch [Restore Factory
Settings]
=For details, refer to Restoring the default set-
ting on this page.
Method 3: Touch [Clear user information]
on the Select Items to Resetscreen
=For details, refer to Returning the navigation
system to the initial state on this page.
Method 4: Touch [Reset] on the Select
Items to Resetscreen
=For details, refer to Returning the navigation
system to the initial state on this page.
Restoring the default setting
Resets various settings registered to the navi-
gation system and restores them to the default
or factory settings.
pBe sure to read Setting items to be deleted
before you perform this operation.
=For details, refer to Setting items to be
deleted on the next page.
1 Display the System Settingsscreen.
=For details, refer to Displaying the screen for
system settings on page 171.
2 Touch [Restore Factory Settings].
The message confirming whether to restore
the settings appears.
3 Touch [Yes].
Returning the navigation
system to the initial state
You can return settings or recorded content to
the default or factory settings.
pBe sure to read Setting items to be deleted
before you perform this operation.
=For details, refer to Setting items to be
deleted on the next page.
1 Park your vehicle in a safe place and
apply the parking brake.
2 Turn the ignition switch off and back
on.
The navigation system restarts, and the splash
screen appears.
3 Press and hold the MODE button and
the TRK (m) button while the splash
screen appears.
pFor users of AVIC-Z140BH, press the MODE
button and the TRK (c) button.
The Select Items to Resetscreen appears.
4 Touch [Clear user information] or
[Reset].
The message confirming whether to erase the
data appears.
5 Touch [Yes].
The recorded contents are cleared.
En 197
Chapter
33
Other functions
Other functions
Setting items to be deleted
The items to be deleted vary depending on the reset method. The items listed in the following table re-
turn to the default or factory settings. Any items not listed below will be retained.
: The setting will be retained.
1: The setting will be cleared and returned to the default or factory settings.
pBold indicates functions or command names.
!Method 1: Remove the vehicle battery
!Method 2: Touch [Restore Factory Settings]
!Method 3: Touch [Clear user information] on the Select Items to Resetscreen
!Method 4: Touch [Reset] on the Select Items to Resetscreen
Navigation functions Method 1 Method 2 Method 3 Method 4
Map function
View mode and scale setting on
the map
——11
Direction of the map ——11
Last cursor position on the map
screen
111
Route setting
Current route 111
Guidance state of the current
route
——11
Vehicle position information ——11
Options 111
Others
Keyboard 111
Learnt data used in Learning
Route 111
Shortcut Menu 111
Destination
Point registered in Favorites ——1
History ——1
Stored city history ——1
Traffic Settings Displayed Traffic Info 111
Map Settings View Mode ——11
Other settings 111
Navi Settings
3D Calibration Status ————
Demo Mode 1111
Set Home ——1
Modify Current Location ——11
Other settings 111
En
198
Chapter
33 Other functions
Navigation functions Method 1 Method 2 Method 3 Method 4
System Settings
Program Language,Voice
Language ——11
Time ——11
Back Camera 1———
Other settings 111
Bluetooth Set-
tings All settings (*1) 111
Phone Menu All settings (*1) 111
Other functions Anti-theft password ————
(*1) All stored data of 5 users is deleted.
AV functions Method 1 Method 2 Method 3 Method 4
Volume 1———
AV Settings
Wide Mode,Mute,VR Cata-
log Menu 111
Other settings 1———
AV Sound All settings 1———
CD,ROM,DVD-V,
DivX,FM,AM,
Audio (Bluetooth
audio)
All settings (*2) 1———
SD,USB All settings (*2) 111
Other functions
Picture Adjustment 1———
Tilt 1———
(*2) All settings including the setting on the Functionmenu are deleted.
En 199
Chapter
33
Other functions
Other functions
Troubleshooting
If you have problems operating your navigation system, refer to this section. The most common
problems are listed below, along with likely causes and solutions. If a solution to your problem
cannot be found here, contact your dealer or the nearest authorized Pioneer service facility.
Problems with the navigation screen
Symptom Cause Action (Reference)
The power doesnt turn on. The
navigation system doesnt oper-
ate.
Leads and connectors are incor-
rectly connected.
Confirm once more that all connections are
correct.
The fuse is blown. Rectify the reason for the fuse blowing, then
replace the fuse. Be very sure to install a cor-
rect fuse with the same rating.
Noise and other factors are causing
the built-in microprocessor to oper-
ate incorrectly.
Park your vehicle in a safe place, and turn off
the engine. Turn the ignition key back to off
(ACC OFF). Then start the engine again, and
turn the power to the navigation system back
on.
You cannot position your vehicle
on the map without a significant
positioning error.
The GPS antenna is in an unsuitable
location.
The quality of signals from the GPS satellites
is poor, causing reduced positioning accu-
racy. Check the GPS signal reception and the
position of the GPS antenna if necessary.
Obstacles are blocking signals from
the satellites.
The quality of signals from the GPS satellites
is poor, causing reduced positioning accu-
racy. Check the GPS signal reception and the
position of the GPS antenna if necessary, or
continue driving until reception improves.
Keep the antenna clean.
The position of satellites relative to
your vehicle is inadequate.
The quality of signals from the GPS satellites
is poor, causing reduced positioning accu-
racy. Continue driving until reception im-
proves.
Signals from the GPS satellites have
been modified to reduce accuracy.
(GPS satellites are operated by the
US Department of Defense, and the
US government reserves the right to
distort positioning data for military
reasons. This may lead to greater
positioning errors.)
The quality of signals from the GPS satellites
is poor, causing reduced positioning accu-
racy. Wait until reception improves.
If a vehicle phone or cellular phone
is used near the GPS antenna, GPS
reception may be lost temporarily.
The quality of signals from the GPS satellites
is poor, causing reduced positioning accu-
racy. When using a cellular phone, keep the
antenna of the cellular phone away from the
GPS antenna.
En
200
Appendix
Appendix
Symptom Cause Action (Reference)
You cannot position your vehicle
on the map without a significant
positioning error.
Something covers the GPS antenna. Do not cover the GPS antenna with spray
paint or vehicle wax, because this may block
the reception of GPS signals. Snow buildup
can also degrade the signals.
Signals from the vehicles speed
pulse are not being picked up prop-
erly.
Check that the cables are properly connected.
If necessary, consult the dealer that installed
the system.
The navigation system may not be
mounted securely in your vehicle.
Check that the navigation system is securely
mounted and, if necessary, consult the dealer
that installed the system.
The navigation system is installed
with an extreme angle exceeding
the installation angle limitations.
Confirm the installation angle. (The naviga-
tion system must be installed within the al-
lowed installation angle. For details, refer to
Installation Manual.)
Indication of the position of your ve-
hicle is misaligned after a U-turn or
reversing.
Check whether or not the reverse gear signal
input lead (violet) is connected properly. (The
navigation system works properly without the
lead connected, but positioning accuracy will
be adversely affected.)
Eco Graphis not available. The navigation system is unable to
obtain past average fuel mileage
data, so Eco Graphcannot be dis-
played.
Drive about 10 km on a road without obstruc-
tions. Then park your vehicle in a safe place,
turn off the navigation system and turn the
power to the navigation system back on.
The map color does not switch
automatically between daytime
and nighttime.
Day/Night Displayis set to
Day.
Check Day/Night Displaysetting and
make sure Automaticis selected. (Page
169)
The orange/white lead is not con-
nected.
Check the connection.
The screen is too bright. Picture quality adjustment of the
display is not correct.
Adjust the picture quality. (Page 177)
The display is very dim. The vehicles light is turned ON, and
Automaticis selected on Day/
Night Display.
Read about Day/Night Displaysetting
and, if desired, select Day. (Page 169)
Picture quality adjustment of the
display is not correct.
Adjust the picture quality. (Page 177)
No sounds of AV source are pro-
duced.
The volume level will not rise.
The volume level is low. Adjust the volume level.
The attenuator or mute is on. Turn the attenuator or mute off.
A speaker lead is disconnected. Check the connection.
The volume of navigation gui-
dance and beeps cannot be ad-
justed.
VOL (+/) button or Multi-control is
used to adjust the volume.
Turn the volume up or down using Volume
on the System Settingsmenu. (Page 173)
The person on the other end of
the phone call cannot hear the
conversation due to an echo.
The voice from the person on the
other end of the phone call is output
from the speakers and then picked
up by the microphone again, creat-
ing an echo.
Use the following methods to reduce the
echo:
Lower the volume on the receiver
Have both parties pause slightly before
speaking
En 201
Appendix
Appendix
Appendix
Symptom Cause Action (Reference)
Theres no picture. The parking brake cord is not con-
nected.
Connect the parking brake cord, and apply
the parking brake.
The parking brake is not applied. Connect the parking brake cord, and apply
the parking brake.
The backlight of the LCD panel is
turned off.
Turn on the backlight. (Page 189)
Rear display picture disappears. The source disc being listened to in
the navigation system has been
ejected.
Before ejecting the disc, switch the source.
This problem may occur when certain con-
nection methods are used.
There is a problem with the rear dis-
play, for example a faulty wiring con-
nection.
Check the rear display and its connection.
An AV source that cannot output to
the rear display is selected.
Select an appropriate AV source.
Nothing is displayed and the
touch panel keys cannot be
used.
The setting for the rear view camera
is incorrect.
Select the appropriate setting for the rear
view camera.
The shift lever was placed in [R]
when the rear view camera was not
connected.
Select the correct polarity setting for Back
Camera. (Page 175)
There is no response when the
touch panel keys are touched, or
a different key responds.
The touch panel keys deviate from
the actual positions that respond to
your touch for some reason.
Perform touch panel calibration. (Page 175)
The external storage device
(USB, SD) cannot be used.
The USB storage device has been
removed immediately after plugging
it.
Park your vehicle in a safe place, and turn off
the engine. Turn the ignition key back to off
(ACC OFF). Then start the engine again, and
turn the power to the navigation system back
on.
Problems in the AV screen
Symptom Cause Action (Reference)
CD or DVD playback is not pos-
sible.
The disc is inserted upside down. Insert the disc with the label upward.
The disc is dirty. Clean the disc.
The disc is cracked or otherwise da-
maged.
Insert a normal, round disc.
The files on the disc are an irregular
file format.
Check the file format.
The disc format cannot be played
back.
Replace the disc.
The loaded disc is a type this system
cannot play.
Check what type of disc it is. (Page 215)
The screen is covered by a cau-
tion message and the video can-
not be shown.
The parking brake lead is not con-
nected or applied.
Connect the parking brake lead correctly, and
apply the parking brake.
The parking brake interlock is acti-
vated.
Park your vehicle in a safe place and apply
the parking brake.
En
202
Appendix
Appendix
Symptom Cause Action (Reference)
No video output from connected
equipment.
No video output from connected
iPod.
AV1 Inputor AV2 Inputsetting
is incorrect.
Correct the settings. (Page 155)
The connection of the USB interface
cable for iPod is incorrect.
Connect both the USB plug and the RCA
cable side. (If only one of these connection
has been made, the iPod will not work prop-
erly.) (Page 22)
The audio or video skips. The navigation system is not firmly
secured.
Secure the navigation system firmly.
No sounds are produced.
The volume level will not rise.
Cables are not connected correctly. Connect the cables correctly.
The system is performing still, slow
motion, or frame-by-frame playback
with DVD-Video.
There is no sound during still, slow motion, or
frame-by-frame playback with DVD-Video.
The system is paused or performing,
fast reverse or forward during the
disc playback.
For the media other than music CD (CD-DA),
there is no sound on fast reverse or forward.
The icon 9is displayed, and op-
eration is not possible.
The operation is not compatible
with the video configuration.
This operation is not possible. (For example,
the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
The picture stops (pauses) and
the navigation system cannot be
operated.
The reading of data is impossible
during disc playback.
Stop playback once, and start playback again.
The picture is stretched, with in-
correct aspect ratio.
The aspect setting is incorrect for
the display.
Select the appropriate setting for that image.
(Page 179, Page 110)
A parental lock message is dis-
played and DVD playback is not
possible.
Parental lock is on. Turn parental lock off or change the level.
(Page 110)
Parental lock for DVD playback
cannot be canceled.
The code number is incorrect. Input the correct code number. (Page 110)
Playback is not with the audio
language and subtitle language
settings selected in DVD/
DivX® Setup.
The DVD playing does not feature
dialog or subtitles in the language
selected in DVD/DivX® Setup.
Switching to a selected language is not possi-
ble if the language selected in DVD/DivX®
Setupis not recorded on the disc. (Page
109)
The picture is extremely unclear/
distorted and dark during play-
back.
The disc features a signal to prohibit
copying. (Some discs may have
this.)
Since the navigation system is compatible
with the copy guard analog copy protect sys-
tem, the picture may suffer from horizontal
stripes or other imperfections when a disc
with that kind of protection signal is viewed
on some displays. This does not mean the na-
vigation system is malfunctioning.
iPod cannot be operated. The iPod is frozen. !Reconnect the iPod with the USB interface
cable for iPod.
!Update the iPod software version.
An error has occurred. !Reconnect the iPod with the USB interface
cable for iPod.
!Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
off (ACC OFF). Then start the engine again,
and turn the power to the navigation system
back on.
!Update the iPod software version.
En 203
Appendix
Appendix
Appendix
Problems with the phone screen
Symptom Cause Action (Reference)
Dialing is not possible because
the touch panel keys for dialing
are inactive.
Your phone is out of range for ser-
vice.
Retry after re-entering the range for service.
The connection between the cellular
phone and the navigation system
cannot be established now.
Perform the connection process.
If the screen becomes frozen...
Park your vehicle in a safe place, and turn off
the engine. Turn the ignition key back to off
(ACC OFF). Then start the engine again, and
turn the power to the navigation system back
on.
En
204
Appendix
Appendix
Messages for navigation functions
The following messages may be displayed by your navigation system. Refer to the table below to
identify the problem, then take the suggested corrective action.
There are occasions when you may see error messages other than those shown here. In such a
case, follow the instructions given on the display.
Message Cause Action (Reference)
Route calculation was not
possible.
Route calculation has failed be-
cause of a malfunction in map data,
software, or hardware.
!Change the destination.
!Consult the Pioneer Local dealer if this mes-
sage persists.
Route calculation not possi-
ble: destination is too far.
The destination is too far. Set a destination closer to the starting point.
Route calculation not possi-
ble: destination is too close.
The destination is too close. Set a destination farther from the starting
point.
Route calculation not possi-
ble: navigation cannot be pro-
vided around destination or
starting point.
The destination, waypoint(s), or
starting point are in an area where
no road exists (e.g. a mountain) and
the route calculation is impossible.
!Set a destination and waypoint(s) on roads.
!Reset the destination after you drive the ve-
hicle to any road.
Route to destination cannot
be calculated.
The destination or waypoint(s) are in
an isolated island, etc. without a
ferry and the route calculation is im-
possible. If there is no road con-
nected to your starting point or
destination, this message will ap-
pear.
Change the destination.
Failed to make the route pro-
file.
In rare cases, a route calculation
error may occur.
!Retry.
!Consult the Pioneer Local dealer if this mes-
sage persists.
No picture folder. Save jpeg
file to /Pictures/ folder
Cannot load the image because
Picturesfolder is not found in the
inserted external storage device.
Use appropriate data and store it correctly.
(Page 174)
Picturesfolder exists on the SD
memory card but there is no load-
able data in the folder.
Use appropriate data and store it correctly.
(Page 174)
Data Read error. Failed to read the data for some rea-
son.
Use appropriate data and store it correctly.
(Page 174)
The file is corrupt The data is damaged or an attempt
was made to set an image file that
was not made to specifications as
the splash screen.
Use appropriate data and store it correctly.
(Page 174)
En 205
Appendix
Appendix
Appendix
Message Cause Action (Reference)
Connection failed. The cellular phones Bluetooth wire-
less technology is turned off.
Activate the target phones Bluetooth wire-
less technology.
The cellular phone is paired (con-
nected) with another device.
Cancel the pairing (connection) and retry.
Rejection has been received from
the cellular phone.
Operate the target phone and accept the con-
nection request from the navigation system.
(Furthermore, check the connection settings
on your cellular phone.)
The target cellular phone cannot be
found.
Check whether your cellular phone is acti-
vated and, whether the distance to your cellu-
lar phone is not too far.
Could not find any available
phone.
No available phone exists in the sur-
roundings when the system
searches for connectable cellular
phones featuring Bluetooth wireless
technology.
!Activate the target phones Bluetooth wire-
less technology.
!Check whether your cellular phone is acti-
vated and, whether the distance to your cellu-
lar phone is not too far.
Registration failed. The cellular phones Bluetooth wire-
less technology is turned off during
the registration step.
Keep turning the target phones Bluetooth
wireless technology on during the registra-
tion.
Rejection by the cellular phone has
received.
Operate the target phone and accept the re-
gistration request from the navigation system.
(Furthermore, check the connection settings
on your cellular phone.)
Registration step has failed for
some reason.
Retry the registration and if the registration
still fails, try registering using your cellular
phone.
En
206
Appendix
Appendix
Message Cause Action (Reference)
Cannot play back all tracks All the files on the inserted external
storage device are secured by DRM.
Store playable files.
All of the files cannot be played by
this unit.
Replace it with the playable file. (Page 218,
Page 235)
USB flash drive was discon-
nected for device protection.
Do not connect this USB flash
drive to the unit. To restart
USB, restart the unit.
The USB connector or USB cable is
short-circuited.
Confirm that the USB connector or USB
cable is not caught in something or da-
maged.
The connected USB storage device
consumes more than maximum al-
lowable current.
Disconnect the USB storage device and do
not use it. Turn the ignition switch to off, then
back ACC to on or turn the ignition switch on
and then connect the compliant USB storage
device.
The USB interface cable for iPod is
short-circuited.
Confirm that USB interface cable for iPod or
USB cable is not caught in something or da-
maged.
Authorization failure. iPod is
not connected.
The iPod is not compatible with this
navigation system.
Use an iPod of a compatible version.
Communication failure !Disconnect the cable from iPod. Once iPod
main menu is displayed, connect the cable
again.
!If the message appears frequently, consult
your dealer.
En
208
Appendix
Appendix
Map matching
As mentioned, the positioning systems used
by this navigation system are susceptible to
certain errors. Their calculations may, on occa-
sion, place you in a location on the map where
no road exists. In this situation, the processing
system understands that vehicles travel only
on roads, and can correct your position by ad-
justing it to a nearby road. This is called map
matching.
With map matching
Without map matching
Handling large errors
Positioning errors are kept to a minimum by
combining GPS, dead reckoning and map
matching. However, in some situations, these
functions may not work properly, and the error
may become bigger.
When positioning by GPS is
impossible
!GPS positioning is disabled if signals can-
not be received from more than two GPS
satellites.
!In some driving conditions, signals from
GPS satellites may not reach your vehicle.
In this case, it is impossible for the system
to use GPS positioning.
In tunnels or en-
closed parking
garages
Under elevated
roads or similar
structures
When driving
among high build-
ings
When driving through
a dense forest or tall
trees
!If a car phone or cellular phone is used
near the GPS antenna, GPS reception may
be lost temporarily.
!Do not cover the GPS antenna with spray
paint or car wax, because this may block
the reception of GPS signals. Snow buildup
can also degrade the signals, so keep the
antenna clear.
pIf a GPS signal has not been received for a
long time, your vehicles actual position
and the current position mark on the map
may diverge considerably or may not be up-
dated. In such case, once GPS reception is
restored, accuracy will be recovered.
En
210
Appendix
Appendix
Conditions likely to cause
noticeable positioning errors
For various reasons, such as the state of the
road you are traveling on and the reception
status of the GPS signal, the actual position of
your vehicle may differ from the position dis-
played on the map screen.
!If you make a slight turn.
!If there is a parallel road.
!If there is another road very nearby, such
as in the case of an elevated freeway.
!If you take a recently opened road that is
not on the map.
!If you drive in zigzags.
!If the road has a series of hairpin bends.
!If there is a loop or similar road configura-
tion.
!If you take a ferry.
!If you are driving on a long, straight road or
a gently curving road.
En 211
Appendix
Appendix
Appendix
Route setting information
Route search specifications
Your navigation system sets a route to your
destination by applying certain built-in rules to
the map data. This section provides some use-
ful information about how a route is set.
CAUTION
When a route is calculated, the route and voice
guidance for the route are automatically set.
Also, for day or time traffic regulations, only infor-
mation about traffic regulations applicable at the
time when the route was calculated is consid-
ered. One-way streets and street closures may
not be taken into consideration. For example, if a
street is open during the morning only, but you
arrive later, it would be against the traffic regula-
tions so you cannot drive along the set route.
When driving, please follow the actual traffic
signs. Also, the system may not know some traf-
fic regulations.
!The calculated route is one example of the
route to your destination decided by the na-
vigation system while taking the type of
streets or traffic regulations into account. It
is not necessarily an optimum route. (In
some cases, you may not be able to set the
streets you want to take. If you need to take
a certain street, set a waypoint on that
street.)
!If the destination is too far, there may be in-
stances where the route cannot be set. (If
you want to set a long-distance route going
across several areas, set waypoints along
the way.)
!During voice guidance, turns and intersec-
tions from the freeway are announced.
However, if you pass intersections, turns,
and other guidance points in rapid succes-
sion, some may delay or not be announced.
!It is possible that guidance may direct you
off a freeway and then back on again.
!In some cases, the route may require you
to travel in the opposite direction to your
current heading. In such cases, you are in-
structed to turn around, so please turn
around safely by following the actual traffic
rules.
!In some cases, a route may begin on the
opposite side of a railway or river from your
actual current location. If this happens,
drive towards your destination for a while,
and try route calculation again.
!When there is a traffic congestion ahead, a
detour route may not be suggested if driv-
ing through the traffic congestion would
still be better than taking the detour.
!There may be instances when the starting
point, the waypoint and the destination
point are not on the highlighted route.
!The number of traffic circle exits displayed
on the screen may differ from the actual
number of roads.
Route highlighting
!Once set, the route is highlighted in bright
color on the map.
!The immediate vicinity of your starting
point and destination may not be high-
lighted, and neither will areas with particu-
larly complex road layouts. Consequently,
the route may appear to be cut off on the
display, but voice guidance will continue.
Auto reroute function
!If you deviate from the set route, the system
will re-calculate the route from that point
so that you remain on track to the destina-
tion.
!This function may not work under certain
conditions.
Handling and care of discs
Some basic precautions are necessary when
handling your discs.
En 213
Appendix
Appendix
Appendix
Video files compatibility (USB, SD)
File extension .avi .mp4, .m4v .wmv
Format MPEG-4 MPEG-4 H.264 WMV
Compatible video codec MPEG-4 MPEG-4 H.264 WMV
Compatible audio codec
Linear PCM
(LPCM), IMA-
ADPCM
MP3
AAC AAC WMA
Recommended
video specifica-
tions
Image size: QVGA
(320 pixels x 240
pixels)
Bit rate:
768 kbps
Frame rate:
30 fps
Bit rate:
768 kbps
Frame rate:
30 fps
Bit rate:
384 kbps
Frame rate:
30 fps
Bit rate:
384 kbps
Frame rate:
30 fps
Maximum bit rate:
Image size:
WQVGA
(400 pixels x 240
pixels)
Bit rate: 2 Mbps
Frame rate:
30 fps
Bit rate: 2 Mbps
Frame rate:
30 fps
Bit rate: 1 Mbps
Frame rate:
30 fps
Bit rate:
768 kbps
Frame rate:
30 fps
Image size: VGA
(640 pixels x 480
pixels)
Bit rate: 1 Mbps
Frame rate:
30 fps
Bit rate: 1 Mbps
Frame rate:
30 fps
Bit rate:
576 kbps
Frame rate:
30 fps
Bit rate:
576 kbps
Frame rate:
30 fps
Maximum file size 2 GB
Maximum playback time 150 minutes
Common notes
!The navigation system may not operate cor-
rectly, depending on the application used
to encode WMA files.
!Depending on the version of Windows
MediaPlayer used to encode WMA files,
album names and other text information
may not be correctly displayed.
!There may be a slight delay when starting
playback of audio files encoded with image
data.
!The navigation system is not compatible
with packet write data transfer.
!This navigation system can recognize up to
32 characters, beginning with the first char-
acter, including extension for the file and
folder name. Depending on the display
area, the navigation system may try to dis-
play them with a reduced font size. How-
ever, the maximum number of the
characters that you can display varies ac-
cording to the width of each character, and
of the display area.
!Folder selection sequence or other opera-
tions may be altered, depending on the en-
coding or writing software.
!Regardless of the length of blank section
between the songs of original recording,
compressed audio discs play with a short
pause between songs.
En 221
Appendix
Appendix
Appendix
Example of a hierarchy
The following figure is an example of the tier
structure in the disc. The numbers in the fig-
ure indicate the order in which folder numbers
are assigned and the order to be played back.
: Folder
:File
1
2
3
4
5
6
L
e
v
e
l 1 L
e
v
e
l 2 L
e
v
e
l 3 L
e
v
e
l 4
Notes
!This product assigns folder numbers. The user
cannot assign folder numbers.
!If there is a folder that does not contain any
playable file, the folder itself will display in the
folder list but you cannot check any files in
the folder. (A blank list will appear.) Also,
these folders will be skipped without display-
ing the folder number.
Bluetooth
Bluetooth is a short-range wireless radio con-
nectivity technology that is developed as a
cable replacement for cellular phones, hand-
held PCs and other devices. Bluetooth oper-
ates in 2.4 GHz frequency range and transmits
voice and data at speeds up to 1 megabit per
second. Bluetooth was launched by a special
interest group (SIG) comprising Ericsson Inc.,
Intel Corp., Nokia Corp., Toshiba and IBM in
1998, and it is currently developed by nearly
2 000 companies worldwide.
!The Bluetooth®word mark and logos are re-
gistered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
PIONEER CORPORATION is under license.
Other trademarks and trade names are
those of their respective owners.
About the SAT RADIO
READY Logo
The SAT RADIO READY logo indicates that the
Satellite Radio Tuner for Pioneer (i. e., XM
tuner and Sirius satellite tuner which are sold
separately) can be controlled by this naviga-
tion system. Please inquire with your dealer or
nearest authorized Pioneer service station re-
garding the satellite radio tuner that can be
connected to this navigation system.
Note:
Everything worth listening to is on SiriusXM,
getting over 130 channels, including the most
commercial-free music, plus the best sports,
news, talk and entertainment.
Sirius, XM, SAT Radio Ready and all related
logos and marks are trademarks of Sirius XM
Radio, Inc. All rights reserved.
HD RadioTechnology
!AVIC-Z140BH
HD Radio Technology manufactured under
license from iBiquity Digital Corporation.
U.S. and Foreign Patents. HD Radioand
the HD, HD Radio, and Arclogos are pro-
prietary trademarks of iBiquity Digital
Corp.
En
222
Appendix
Appendix
SD and SDHC logo
SD Logo is a trademark of SD-3C, LLC.
SDHC Logo is a trademark of SD-3C, LLC.
microSD Logo is a trademark of SD-3C, LLC.
microSDHC Logo is a trademark of SD-3C,
LLC.
WMA/WMV
Windows Media is either a registered trade-
mark or trademark of Microsoft Corporation in
the United States and/or other countries.
pThis product includes technology owned by
Microsoft Corporation and cannot be used
or distributed without a license from
Microsoft Licensing, Inc.
DivX
DivX is a compressed digital video format cre-
ated by the DivX video codec from DivX, LLC, a
subsidiary of Rovi Corporation. This unit can
play DivX video files recorded on CD-R/RW/
ROM and DVD-R/RW/ROM discs. Keeping the
same terminology as DVD video, individual
DivX video files are called Titles. Keep in
mind that when naming flies/titles on a CD-R/
RW or a DVD-R/RW disc prior to burning, they
will by played in written order by default.
pDivX®, DivX Certified®and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
ABOUT DIVX VIDEO: DivX®is a digital
video format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX
Certified®device that plays DivX video. Visit
divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified®device must be registered in
order to play purchased DivX Video-on-De-
mand (VOD) movies. To obtain your registra-
tion code, locate the DivX VOD section in
Displaying your DivX VOD registration code.Go
to vod.divx.com for more information on how
to complete your registration.
=For details, refer to Displaying your DivX
VOD registration code on page 182.
AAC
AAC is short for Advanced Audio Coding and
refers to an audio compression technology
standard used with MPEG-2 and MPEG-4. Sev-
eral applications can be used to encode AAC
files, but file formats and extensions differ de-
pending on the application which is used to
encode. This unit plays back AAC files en-
coded by iTunes.
Android
Android is a trademark of Google Inc.
En 223
Appendix
Appendix
Appendix
BlackBerry®
The Trademark BlackBerry
®
is owned by
Research In Motion Limited and is regis-
tered in the United States and may be
pending or registered in other countries.
PIONEER CORPORATION is not en-
dorsed, sponsored, affiliated with or other-
wise authorized by
Research In Motion Limited.
Detailed information
regarding connected iPod
devices
CAUTION
!Pioneer accepts no responsibility for data lost
from an iPod, even if that data is lost while
using the navigation system. Please back up
your iPod data regularly.
!Do not leave the iPod in direct sunlight for ex-
tended amounts of time. Extended exposure
to direct sunlight can result in iPod malfunc-
tion due to the resulting high temperature.
!Do not leave the iPod in any location with
high temperatures.
!Firmly secure the iPod when driving. Do not
let the iPod fall onto the floor, where it may be-
come jammed under the brake or gas pedal.
For details, refer to the iPod manuals.
iPod and iPhone
Made for iPodand Made for iPhonemean
that an electronic accessory has been de-
signed to connect specifically to iPod or
iPhone, respectively, and has been certified by
the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
Please note that the use of this accessory with
iPod or iPhone may affect wireless perfor-
mance.
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc., regis-
tered in the U.S. and other countries.
iTunes
iTunes is a trademark of Apple Inc., registered
in the U.S. and other countries.
Using app-based connected
content
IMPORTANT
Requirements to access app-based connected
content services such as Pandora internet radio
and Aha Radio using the Pioneer navigation sys-
tem:
!Latest version of the Pioneer compatible con-
nected content application(s) for the smart-
phone, available from the service provider,
downloaded to your smartphone.
!A current account with the content service
provider.
!Smartphone Data Plan.
Note: if the Data Plan for your smartphone
does not provide for unlimited data usage, ad-
ditional charges from your carrier may apply
for accessing app-based connected content
via 3G and/or EDGE networks.
!Connection to the Internet via 3G, EDGE or
Wi-Fi network.
!Optional Pioneer adapter cable connecting
your iPhone to the Pioneer navigation system.
Limitations:
!Access to app-based connected content will
depend on the availability of cellular and/or
Wi-Fi network coverage for the purpose of al-
lowing your smartphone to connect to the In-
ternet.
En
224
Appendix
Appendix
System Settings menu
Page
Regional Settings
Program Language
Voice Language
172
Time 172
km / mile 172
Average Speed 173
Volume 173
Splash Screen 174
Back Camera 175
Screen Calibration 175
Illumi Color 176
Service Information 176
Restore Factory Settings 197
Map Settings menu
Page
Displayed Info
Close Up View 165
City Map 165
City Map Barrier 165
Show Traffic Incident 166
Bluetooth Connected 166
Current Street Name 166
Favorites Icon 167
3D Land Mark 167
Show Maneuver 167
Show Eco Meter 168
Quick Access Selection 170
Overlay POI 168
View Mode 34
Day/Night Display 169
AV Guide Mode 170
Road Color 170
En 229
Appendix
Appendix
Appendix
Bluetooth Settings menu
Page
Connection 62
Registration 59
Device Name 69
Password 70
Bluetooth On/Off 70
Echo Cancel 70
Page
Auto Answer Preference 70
Refuse All Calls 71
Sort Order 69
Clear Memory 71
Firmware update 72
AV System Settings menu
Page
AV1 Input 178
AV2 Input 179
Wide Mode 179
Auto EQ Meas. 185
App Connection 133
Mute 180
Mute Level 180
Rear SP 180
DivX® VOD 182
VR Catalog Menu 181
En
230
Appendix
Appendix
Glossary
AAC
AAC is short for Advanced Audio Coding and
refers to an audio compression technology
standard used with MPEG-2 and MPEG-4.
Aspect ratio
This is the width-to-height ratio of a TV screen.
A regular display has an aspect ratio of 4:3.
Wide screen displays have an aspect ratio of
16:9, providing a bigger picture for exceptional
presence and atmosphere.
Bit rate
This expresses data volume per second, or bps
units (bits per second). The higher the rate,
the more information is available to reproduce
the sound. Using the same encoding method
(such as MP3), the higher the rate, the better
the sound.
Built-in sensor
The built-in sensor that enables the system to
estimate your vehicles position.
CD-DA
This stands for a general music CD (commer-
cial-release audio CD). In this manual, this
word is sometime used for a distinction be-
tween data CDs (which include compressed
audio files) and general music CDs.
Chapter
Titles of DVD-Video are in turn divided into
chapters which are numbered in the same
way as the chapters of a book. With discs fea-
turing chapters, you can quickly find a desired
scene with chapter search.
Current location
The present location of your vehicle; your cur-
rent location is shown on the map by a red tri-
angle mark.
Destination
A location you choose as the end point of your
journey.
DivX
DivX is a popular media technology created by
DivX, LLC, a subsidiary of Rovi Corporation.
DivX media files contain highly compressed
video with high visual quality that maintains a
relatively small file size. DivX files can also in-
clude advanced media features like menus,
subtitles, and alternate audio tracks. Many
DivX media files are available for download on-
line, and you can create your own using your
personal content and easy-to-use tools from
DivX.com.
DivX Certified®
DivX Certified®products are officially tested by
the creators of DivX and guaranteed to play all
versions of DivX video, except for DivX 7.
Favorites
A frequently visited location (such as your
workplace or a relatives home) that you can
register to allow easy routing.
GPS
Global Positioning System. A network of satel-
lites that provides navigation signals for a vari-
ety of purposes.
Guidance point
These are important landmarks along your
route, generally intersections. The next gui-
dance point along your route is indicated on
the map by the yellow flag icon.
Home location
Your registered home location.
ID3 tag
This is a method of embedding track-related
information in an MP3 file. This embedded in-
formation can include the track title, the ar-
tists name, the album title, the music genre,
the year of production, comments and other
data. The contents can be freely edited using
software with ID3 tag editing functions.
Although the tags are restricted by the num-
ber of characters, the information can be
viewed when the track is played back.
En
232
Appendix
Appendix
DVD Drive
System .......................................... DVD-Video, CD, MP3, WMA,
AAC, DivX system
Usable discs .............................. DVD-Video, DVD-R(DL),
DVD-RW, CD-ROM, CD-DA,
CD-R/RW
Region number ........................ 1
Signal format:
Sampling frequency ..... 44.1 kHz/48 kHz/96 kHz
Number of quantization bits
........................................... 16 bit/20 bit/24 bit; linear
Frequency response ............... 5 Hz to 44 000 Hz (with DVD,
at sampling frequency
96 kHz)
Signal-to-noise ratio ............... 97 dB (1 kHz) (IHF-A net-
work)
(CD: 96 dB (1 kHz) (IHF-A
network))
Dynamic range ......................... 95 dB (1 kHz) (CD: 94 dB
(1 kHz))
Distortion ..................................... 0.008 % (1 kHz)
Output level:
Video .................................... 1.0 Vp-p/75 W(±0.2 V)
Audio ................................... 1.0 V (1 kHz, 0 dB)
Number of channels .............. 2 (stereo)
MP3 decoding format ........... MPEG-1, 2 & 2.5 Audio Layer
3
WMA decoding format ......... Ver. 7, 8 & 9
AAC decoding format ............ MPEG-4 AAC (only encoded
by iTunes):
.m4a
DivX decoding format ............ Home Theater Ver.3.11,
Ver.4.X, Ver.5.X, Ver.6.X :
.avi, .divx
USB
USB standard spec. ............... USB 2.0 High Speed
Max current supply ................. 1A
File system .................................. FAT16, FAT32
USB class .................................... Mass storage class
Decoding format ...................... MP3/WMA/AAC/WAVE/
H.264/MPEG4/WMV
SD (AVIC-Z140BH)
SD memory card, SDHC memory card
Compatible physical format
........................................... Version 2.00
File system ........................ FAT16, FAT32
Decoding format ............ MP3/WMA/AAC/WAVE/
H.264/MPEG4/WMV
SD (AVIC-X940BT)
microSD card, microSDHC card
Compatible physical format
........................................... Version 2.00
File system ........................ FAT16, FAT32
Decoding format ............ MP3/WMA/AAC/WAVE/
H.264/MPEG4/WMV
Bluetooth
Version .......................................... Bluetooth 2.0+EDR
Output power ............................ +4 dBm Max.
(Power class 2)
FM tuner
AVIC-Z140BH
Frequency range ............ 87.9 MHz to 107.9 MHz
Usable sensitivity ........... 9 dBf (0.8 µV/75 W, mono,
S/N: 30 dB)
Signal-to-noise ratio ..... 80 dB (digital broadcasting)
(IHF-A network)
72 dB (analog broadcasting)
(IHF-A network)
Distortion ........................... 0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 % (at 65 dBf, 1 kHz,
mono)
Frequency response ..... 30 Hz to 15 000 Hz (±3 dB)
Stereo separation .......... 45 dB (at 65 dBf, 1 kHz)
AVIC-X940BT
Frequency range ............ 87.9 MHz to 107.9 MHz
Usable sensitivity ........... 9 dBf (0.8 µV/75 W, mono,
S/N: 30 dB)
Signal-to-noise ratio ..... 72 dB (IHF-A network)
Distortion ........................... 0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 % (at 65 dBf, 1 kHz,
mono)
Frequency response ..... 30 Hz to 15 000 Hz (±3 dB)
Stereo separation .......... 45 dB (at 65 dBf, 1 kHz)
AM tuner
AVIC-Z140BH
Frequency range ............ 530 kHz to 1 710 kHz
(10 kHz)
Usable sensitivity ........... 25 µV (S/N: 20 dB)
Signal-to-noise ratio ..... 80 dB (digital broadcasting)
(IHF-A network)
62 dB (analog broadcasting)
(IHF-A network)
AVIC-X940BT
Frequency range ............ 530 kHz to 1 710 kHz
(10 kHz)
Usable sensitivity ........... 25 µV (S/N: 20 dB)
Signal-to-noise ratio ..... 62 dB (IHF-A network)
En
236
Appendix
Appendix
Traffic tuner (AVIC-Z140BH)
Rated power source ............... 13.8 V DC
(allowable voltage range:
10.0 V to 14.5 V DC)
Grounding system ................... Negative type
Maximum current consumption
........................................... 60 mA
Dimensions (W × H × D) ... 68 mm × 49 mm × 19 mm
(2-5/8 in. × 1-7/8 in. ×
3/4 in.)
Weight .......................................... 180 g (0.397 lbs)
CEA2006 Specifications
Power output ............................. 14 W RMS × 4 Channels
(4 Wand 1 % THD+N)
S/N ratio ....................................... 91 dBA (reference: 1 W into
4W)
Note
Specifications and design are subject to possible
modifications without notice due to im-
provements.
En 237
Appendix
Appendix
Appendix
En
238


Specyfikacje produktu

Marka: Pioneer
Kategoria: Nawigacja
Model: AVIC-X940BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pioneer AVIC-X940BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nawigacja Pioneer

Instrukcje Nawigacja

Najnowsze instrukcje dla Nawigacja

A-Rival

A-Rival Teasi One Instrukcja

15 Stycznia 2025
Navman

Navman F47M Instrukcja

5 Października 2024
Navman

Navman 4000 Instrukcja

5 Października 2024