Instrukcja obsługi Pioneer A-10EB


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pioneer A-10EB (52 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/52
En
Fr
E
s
Instruction Manual
A-10AE
INTEGRATED AMPLIFIER
Before use
Preparations
Basic Operations
Others
2
Before use
Be fore us e
Before use
What’s in the box ................................................ 2
Safety Information............................................... 3
Part Names ............................................................ 5
Front Panel ........................................................ 5
Rear Panel ......................................................... 6
Preparations
Setup and connection .......................................... 7
Connecting Speakers.......................................... 7
Connecting players (LINE IN connection) .......... 8
Connecting players (Turntable connection) ....... 8
Power Cord Hookup............................................ 9
Before play .......................................................... 10
Turn on the power of the unit ........................... 10
Speaker impedance settings ............................ 10
Basic Operations
Playback ...............................................................11
Switching input and adjusting the volume .........11
Using the Direct Function ..................................11
Adjusting the sound quality and balance ......... 12
Others
Useful functions ................................................. 13
Setting auto standby ........................................ 13
Troubleshooting ................................................. 14
Specifications ..................................................... 16
1. Main unit (1)
Instruction Manual (This document)
0Connect speakers with 4 to 16 impedance.
0The power cord must be connected only after all other
cable connections are completed.
0We will not accept responsibility for damage arising from
the connection of equipment manufactured by other
companies.
0Specifications and appearance are subject to change
without prior notice.
Table of Contents What’s in the box
3
En
Before use
Safety Information
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous
voltage" within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
WARNING
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with liquid
near this equipment (such as a vase or flower pot) or
expose it to dripping, splashing, rain or moisture.
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
Store small parts out of the reach of children and infants. If
accidentally swallowed, contact a doctor immediately.
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product, and
to protect it from overheating. To prevent fire hazard, the
openings should never be blocked or covered with items
(such as newspapers, tablecloths, curtains) or by operating
the equipment on thick carpet or a bed.
Precautions
If you install the apparatus in a built-in installation, such as
a bookcase or rack, ensure that there is adequate
ventilation.
Leave 20 cm (8”) of free space at the top and sides and
10 cm (4”) at the rear. The rear edge of the shelf or board
above the apparatus shall be set 10 cm (4”) away from the
rear panel or wall, creating a flue-like gap for warm air to
escape.
Operating Environment
Operating environment temperature and humidity: +5 °C to
+35 °C (+41 °F to +95 °F); less than 85 %RH (cooling
vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light).
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
AVIS
Important Notice
The model number and serial number of this equipment
are on the rear or bottom. Record these numbers on your
enclosed warranty card and keep in a safe place for future
reference.
CAUTION
The power switch on this unit will not completely shut off all
power from the AC outlet. Since the power cord serves as
the main disconnect device for the unit, you will need to
unplug it from the AC outlet to shut down all power.
Therefore, make sure the unit has been installed so that
the power cord can be easily unplugged from the AC outlet
in case of an accident. To avoid fire hazard, the power cord
should also be unplugged from the AC outlet when left
unused for a long period of time (for example, when on
vacation).
This product is for general household purposes. Any failure
due to use for other than household purposes (such as
long-term use for business purposes in a restaurant or use
in a car or ship) and which requires repair will be charged
for even during the warranty period.
Power-Cord Caution
Handle the power cord by the plug. Do not pull out the plug
by tugging the cord and never touch the power cord when
your hands are wet as this could cause a short circuit or
electric shock. Do not place the unit, a piece of furniture,
etc., on the power cord, or pinch the cord. Never make a
knot in the cord or tie it with other cords. The power cords
should be routed such that they are not likely to be stepped
on. A damaged power cord can cause a fire or give you an
electrical shock. Check the power cord once in a while.
When you find it damaged, ask your nearest our
authorized service center or your dealer for a replacement.


Specyfikacje produktu

Marka: Pioneer
Kategoria: odbiornik
Model: A-10EB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pioneer A-10EB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Pioneer

Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024
Pioneer

Pioneer GM-D500M Instrukcja

6 Października 2024
Pioneer

Pioneer VSX-535 Instrukcja

4 Października 2024
Pioneer

Pioneer A-10EB Instrukcja

23 Września 2024
Pioneer

Pioneer VSX-531D-B Instrukcja

21 Września 2024
Pioneer

Pioneer DMH-342EX Instrukcja

21 Września 2024
Pioneer

Pioneer DMH-340EX Instrukcja

17 Września 2024
Pioneer

Pioneer AVH-A215BT Instrukcja

14 Września 2024
Pioneer

Pioneer DEH-1050E Instrukcja

4 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Denon

Denon AVR-991 Instrukcja

10 Października 2024