Instrukcja obsługi Philips SBC RU 660

Philips Zdalne sterowanie SBC RU 660

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Philips SBC RU 660 (31 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/31
Su mando a distancia
Votre télécommande
Ihre Fernbedienung
Your Remote Control
SBC RU660/00
Jouw afstandbediening
Il tuo telecomando
SHIFT: to get access to additional functions (press together
with other function keys). Depending on the age of
your equipment, the result is for example:
SHIFT + PROG+: increases brightness or menu up function
SHIFT + PROG-: decreases brightness or menu down function
SHIFT + VOL+: increases colour or menu right function
SHIFT + VOL-: decreases colour or menu left function
Try other shift/key combinations on your equipment to
discover which functions are available.
Remember that you can’t get access to additional functions if
these functions were not available on the original remote
control of your equipment!
To operate menu control.
To confirm your selection.
SLEEP: to activate and vary the sleep timer (if available on
your equipment).
To switch on teletext.
To stop changing teletext pages.
To enlarge the teletext display on screen.
To put subtitling on your screen (if available on your
equipment), or to switch teletext off.
If you use the memory out key ( ) to access the nextfi
teletext page on your Philips TV, you can use the subtitle key
to access. For more details see section underMemory Out
Troubleshooting.
Fasttext VCR
Red Rewind
Record
Green Stop
Play
Blue Forward
Yellow Pause
To switch between the external inputs of your equipment.
Instructions for use
3
English
You just made a great choice by buying this Philips universal
remote control! It takes the place of as many as six separate
remote controls and can operate the most-used functions of
almost any brand of TV, VCR, satellite tuner/cable decoder
and AUDIO equipment.
Installing the batteries
Your SBC RU 660 needs two 1.5V batteries, type R03, UM4 or
AAA.
Put them in like this:
KEYS & FUNCTIONS
Power: to switch TV/VCR/SAT/CD/AUDIO1/AUDIO2 on and off.
Mode Selector: to select TV, VCR, Satellite mode, CD, AUDIO1
or AUDIO2.
Mute: to switch the TV sound on and off.
Channel Up/Down: to select next / previous channel.
Volume Up/Down: to control the TV volume.
Number Keys: for direct channel selection and other
functions.
To switch between one and two-digit channel selection and
display.
To switch to the last selected channel.
LR03 / AAA
LR03 / AAA
Instructions for use
English
2
TI P
• Remember to replace the batteries at least once a year.
• Don’t leave the batteries out for longer than one hour,
otherwise you will need to set-up the SBC RU660 again.
• While the remote control is actively being moved about,
the back-lighting stays on. This consumes more power
than normal and may require you to change your batteries
more frequently. You can easily turn the back-lighting
function off to conserve power. To do this please follow
the instructions in the backlighting section.
1
9
+
PR OG
PR OG
VO L
+
VO L
-
T V
VCR
SA T
A UDIO 1
A UDIO 2
CD
M
E
N
U
O
K
AV
SHIFT
4Press the power key to start the search. Make sure that you
keep the remote control pointed at your equipment.
– Each time the green LED flashes, another code is sent.
When the right code is found, the equipment switches off.
Immediately press the power key to stop the search.
If the green LED flashed again after the equipment
switched off, this means you missed the correct code! If
you missed the code, follow the next proccedure, starting
at step 5. If the LED did not flash again after the
equipment switched off, go to step 7.
5Switch the equipment manually back on.
6Press ‘PROG-’ (down only!) repeatedly to send previous
codes until the equipment switches off again.
7Press the power key to lock the correct code in the SBC
RU660’s memory.
– The green LED flashes twice.
C
H E C K
Switch equipment on manually. Press a few keys to check correct
response. If response is not correct, repeat procedure beginning
at step 1.
N
O T E
- The search time averages about 90 seconds. (Maximum search
time is 5 minutes for TV, 2 minutes for VCR, 4 minutes for SAT
and 3 minutes for CD/AUDIO).
- Autosearch stops automatically after all codes have been
tested.
MAKE A NOTE OF YOUR CODE!
A
D V I C E
Carefully read the complete procedure before starting!
Note the code inside the battery case and in the codelist in
the centre of this booklet. This may be useful if you ever need
to set up the SBC RU660 again. You used the auto search
procedure or you forgot to note the code after set up? No
problem! You can still ‘read out’ the code from the remote:
1Make sure you’ve selected the right mode with the mode
selector key.
2Press and release keys 1 and 6 simultaneously.
Important: after pressing the keys, you have to release them
immediately!
– The green LED lights up.
3Press the two digits key.
– The green LED goes out.
4Press key 1 and count the number of times the green LED
flashes. This is the first digit of the 3-digit code. (No
flashes means the digit is zero.)
5Press key 2 and count the number of flashes for the second
digit.
6Press key 3 and count the number of flashes for the third
digit.
7Note the code.
Instructions for use
5
English
SET-UP FOR USE
AD V I C E
Carefully read the complete procedure before starting!
Your equipment is a Philips brand:
1Press the mode selector key for the device you want to
operate.
2 Press the power key to test.
– The green indicator LED under each device (TV, VCR, SAT,
CD, AUDIO1, AUDIO2) lights up to confirm the mode
you’re in.
CH E C K
Press a few keys to check correct response.
Your equipment is of another brand, or your
equipment is a Philips brand, but not all keys
respond correctly:
1 Press the mode selector key to select the device (TV, VCR,
SAT, CD, AUDIO1, AUDIO2) you want to operate.
2Look up the brand name of the device you want to
operate in the code list (centre of this manual).
Make sure you choose the correct code list for your device!
3Make sure the device is switched on.
4Press and hold keys 1 and 3 simultaneously - for about
three seconds- until the green LED lights up. (Release the
keys: the green LED should stay on)
5Enter your 3-digit code using the number keys, within
30 seconds.
– The green LED flashes twice.
CH E C K
That’s it! Press a few keys to check correct response. If
response is not correct, repeat procedure beginning at step 1.
NO T E
- If the LED displays one long flash, the code was not
recognised. Please go back to step 1 and repeat the
procedure, using the next 3-digit code in the list.
- If no key is pressed within 30 seconds, you have to start
again at step 1.
AD V I C E
Carefully read the complete procedure before starting!
You do not know the brand of your
equipment/you can not find the right code in
the code list » auto search:
1Press the mode selector key to select the device (TV, VCR,
SAT, CD, AUDIO1, AUDIO2) you want to operate.
2Make sure the device is switched on (if the device is a
VCR, please insert a tape and start playback).
3Press and hold keys 1 and 3 simultaneously -for about
three seconds- until the green LED lights up.
(Release the keys: the green LED should stay on)
Instructions for use
English
4
1
9
-
1
3
T V
VCR
SA T
A UDIO 1
A UDIO 2
CD
T V
VCR
SA T
A UDIO 1
A UDIO 2
CD
T V
VCR SA T
A UDIO 1
A UDIO 2
CD
1
3
PR OG
1
6
1
2
3
T V
VCR
SA T
A UDIO 1
A UDIO 2
CD

Specyfikacje produktu

Marka: Philips
Kategoria: Zdalne sterowanie
Model: SBC RU 660

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Philips SBC RU 660, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zdalne sterowanie Philips

Philips

Philips SRP9232D Instrukcja

5 Października 2024
Philips

Philips SBC RU 660 Instrukcja

4 Października 2024
Philips

Philips TSU7000 Instrukcja

2 Października 2024
Philips

Philips SRP3014 Instrukcja

1 Października 2024
Philips

Philips Prestigo SRU9600 Instrukcja

1 Października 2024
Philips

Philips LivingColors 6916431PH Instrukcja

24 Września 2024
Philips

Philips Prestigo SRT9320 Instrukcja

21 Września 2024
Philips

Philips SBC RU 545 Instrukcja

19 Września 2024
Philips

Philips SRP6011 Instrukcja

16 Września 2024
Philips

Philips SRP2018 Instrukcja

15 Września 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Neewer

Neewer RT112 Instrukcja

9 Października 2024
Neewer

Neewer RT113 Instrukcja

9 Października 2024
Zalman

Zalman ZM-VE350 Instrukcja

9 Października 2024
Canon

Canon BG-R20 Instrukcja

9 Października 2024
Canon

Canon BG-R20EP Instrukcja

9 Października 2024
Mosconi

Mosconi DSP6T8 Instrukcja

8 Października 2024
Mosconi

Mosconi RC MINI Instrukcja

8 Października 2024
Ridem

Ridem CRC UNB Instrukcja

8 Października 2024
Ridem

Ridem CRC UNW Instrukcja

8 Października 2024
ORNO

ORNO OR-GB-458 Instrukcja

8 Października 2024