Instrukcja obsługi Phase Technology PC-Sub WL12
Phase Technology
subwoofer
PC-Sub WL12
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Phase Technology PC-Sub WL12 (6 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6

Thank you for choosing Phase Technology
® speakers. We know
there are a wide variety of choices available today, and we sincerely
appreciate your purchase of our product. Phase Technology
speakers are built to exacting standards and will provide many
years of listening enjoyment.
Our speakers are the result of over ve decades of designing
and manufacturing. We hold many key patents in loudspeaker
technology including the soft-dome tweeter. Our mission, our
passion is to constantly advance the art and science of accurate
audio reproduction. Our dedication insures your new speakers will
accurately reproduce all the impact, detail and delicacy of today’s
digital technology.
Regardless of application, serious audiophile listening or home
theater, we recommend that you take the time to read this manual
thoroughly before connecting speakers to your amplier or receiver.
In the highly unlikely event that you should experience a problem
with set-up or operation, please contact one of our authorized
dealers for assistance, or contact us directly.
Phase Technology Corporation
8005 W. 110th St., Suite 208
Overland Park, KS 66210
855.663.5600 (Domestic)
+1.913.663.5600 (International)
Fax: 913.663.3200
[FEATURES]
• Down-firing woofers in a rear slotted port design
• 300 Watt RMS, 900-Watt Peak Power Internal Amplier
• Signal Sensing Auto Turn On/Off
• Gain Control
• Phase Switch
• Variable Crossover
• Line/LFE Input
•Wireless 2.4 GHz Uncompressed Audio Streaming
• Servo-Control monitors and adjusts outpul for dynamic
and undistorted response
SAFETY INSTRUCTIONS 2
GETTING STARTED AND PRECAUTIONARY NOTES 3
SUBWOOFER PLACEMENT 3
SPEAKER CONNECTIONS 3
HOOKING UP YOUR PC SUB WL 4
AMPLIFIER SETUP AND BASS MANAGEMENT 4
SUBWOOFER AMPLIFIER PANEL 5
VIBRATION ISOLATION PADS 5
CARING FOR YOUR SPEAKERS 5
MAINTENANCE AND SERVICE 5
TROUBLESHOOTING 5
WARRANTY 6
SPECIFICATIONS 6
POWER
ST AT US
RESET
WIRELESS LINE
IN
LOW PASS
FREQ. Hz
PHASE GAIN
MIN
200
40 LFE MAX
PC-SUB WL12
WIRELESS SUBWOO FER
MADE IN USA
ON
PC-SUB WL
UNCOMPRESSED AUDIO
WIRELESS TRANSMITTER
WL SUBWOOFER
REARVIEW
& TRANSMITTER
PC SUB WL SUBWOOFERS
OWNER’S MANUAL: PC SUB WL-10 PC SUB WL-12•

2
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and other instructions
should be followed.
5. Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, etc.
6. Carts and Stands - The appliance should be used only with a
cart or stand that is recommended by the manufacturer.
PORTABLE CART WARNING
7. Wall or Ceiling Mounting - The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its
location or position does not interfere with its proper ventilation.
For example, the appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the ventilation openings;
or placed in a built-in installation, such as a bookcase or cabinet
[SAFETY INSTRUCTIONS] that may impede the ow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources
such as radiators, stoves, or other appliances that produce heat.
10. Power Source - The appliance should be connected to
a power supply only of the type described in the operating
instructions or as marked on the appliance.
11. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed up or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they
exit from the appliance.
12. Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.
13. Nonuse Periods - The power cord of the appliance should
be unplugged from the outlet when left unused for a long period
of time.
14. Object and Liquid Entry - Care should be taken so that
neither objects fall nor liquids spill into the inside of the appliance.
15. Damage Requiring Service - The application should be
serviced by qualied service personnel when:
a. the power supply cord or the plug has been damaged,
b. objects have fallen onto or liquid has been spilled into the
appliance,
c. the appliance has been exposed to rain,
d. the appliance does not appear to operate normally or exhibits a
marked change in performance, or
e. the appliance has been dropped or the cabinet damaged.
16. Servicing - The user should not attempt to service the
appliance beyond those means described in the operating
instructions. All other servicing should be referred to qualied
service personnel.
17. Grounding or Polarization - Precautions should be taken so
that the grounding or polarization means of an appliance is not
defeated.
Explanation of Graphical Symbols
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the presence
of un-insulated “dangerous voltage: within the product’s
enclosure that may be off sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert you to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR
USAGE
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
PLUG TO WIDE SLOT, INSERT FULLY.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRESE ET POUSSER JUSQU AU FOND.
CAUTION: To reduce the risk of electric shock, do not remove cover
(or back). No user-serviceable parts inside. Refer servicing to qualied
service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

3
[GETTING STARTED AND PRECAUTIONARY NOTES]
For proper connection and therefore full enjoyment of your new Phase Technology speakers, we encourage you to read this owners’ manual
thoroughly, even if you are very familiar with installing speakers and home entertainment equipment.
Speaker placement is very subjective. Placement follows the guidelines for the developers of multi-channel home entertainment systems, yet
is also guided by personal preferences. The proper spacing, location and adjustment of front, rear and center-channel speakers as well as
subwoofers are critical for complete enjoyment of your new speakers. This manual covers these topics thoroughly.
Before connecting your new speakers or other system components, turn the system power off and unplug your amplier to avoid any
possibility of damage from power surges or unbalanced loads before the system is properly connected.
Observe speaker polarity carefully! Every cable, speaker terminal and amplier connection are clearly marked to show their positive (+) and
negative (-) polarities. For ideal system performance, always connect the positive side of the cable (marked with a stripe, color and /or other
indicator) to the positive terminals on your speakers and amplier and the negative side of the cable to the negative terminals.
Amplier selection is critical to your enjoyment of your new speakers. If you are considering upgrading your current component amplier or
multi-function receiver, we suggest purchasing as much power as your budget can afford. It will always be preferable to have an affordable
high-powered model with fewer “bells and whistles” than a lower-powered model straining to operate near its power limits.
High volume settings that produce audible distortion – indicating an under-powered amplier – could eventually damage your speakers and
your amplier.
Begin and end listening sessions at low volume levels so you will not power up your system the next time with possibly harmful high voltages.
A damaging surge also could result if you change the input source (from FM tuner to CD player, for example) at high volume levels.
If you suspect that one channel of your amplier has failed, have it repaired immediately by your dealer. Damage to your speakers could occur
if you switch between the good and defective channels.
[SUBWOOFER PLACEMENT]
Subwoofer placement is less critical, because the frequencies they reproduce are omni directional. This means the human ear doesn’t
perceive these low frequencies as coming from a specic direction, enabling placement of a subwoofer virtually anywhere in the listening
room.
It’s best, however, to keep a subwoofer within the sound eld of the other speakers. The closer the subwoofer is to a wall, the louder and more
intense its bass output will be: this effect is even stronger when the sub is placed in or near a room’s corner. If using two subwoofers, start
by placing them next to the front left and right speakers, in both front corners or one in the corner and one 1/3 of the way along the front wall
from the corner. Each room is different. Experiment with these options or try other locations until you get the best results. If you must choose a
less-than-ideal position, the output level of Phase Technology powered subwoofers is adjustable to compensate for your listening environment.
[SPEAKER CONNECTIONS]
The following instructions apply whether you are using a separate amplier or Home Theater receiver. For simplicity we will use the term
“amplier” throughout this manual to mean both.
Special note: Turn off and unplug your amplier before connecting speakers.
Special Note: Observe Speaker Polarity Carefully!
Every cable, speaker and amplifier is clearly marked to show their positive (+) and negative (-) terminals. Amps and speakers
may use some combination of these symbols and/or colors to indicate positive (usually red) and negative (usually black or
white) connections. One strand of your cable will also be ridged and/or marked with a colored line or other indicator on the
positive side. For proper polarity and, thus, ideal system performance, always connect the positive side of the cable to the
positive terminals on your speakers and amplifier and the negative side of the cable to the negative terminals.
Specyfikacje produktu
Marka: | Phase Technology |
Kategoria: | subwoofer |
Model: | PC-Sub WL12 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Phase Technology PC-Sub WL12, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje subwoofer Phase Technology

5 Marca 2025

5 Marca 2025

5 Marca 2025

5 Marca 2025

5 Marca 2025

5 Marca 2025

5 Marca 2025

5 Marca 2025

5 Marca 2025
Instrukcje subwoofer
- subwoofer Sony
- subwoofer Yamaha
- subwoofer Sharp
- subwoofer Pioneer
- subwoofer Philips
- subwoofer Technics
- subwoofer Bosch
- subwoofer JBL
- subwoofer Onkyo
- subwoofer Roland
- subwoofer Origin Acoustics
- subwoofer KEF
- subwoofer Bose
- subwoofer Klipsch
- subwoofer Crestron
- subwoofer Behringer
- subwoofer Tangent
- subwoofer Boss
- subwoofer Marquant
- subwoofer Jensen
- subwoofer Blaupunkt
- subwoofer Speed-Link
- subwoofer Metra
- subwoofer Martin Logan
- subwoofer DAP-Audio
- subwoofer Denon
- subwoofer Phoenix Gold
- subwoofer Audac
- subwoofer Cambridge
- subwoofer Kenwood
- subwoofer Polk
- subwoofer Alpine
- subwoofer Dynaudio
- subwoofer Paradigm
- subwoofer JVC
- subwoofer Memphis Audio
- subwoofer Jamo
- subwoofer Auna
- subwoofer Nubert
- subwoofer LD Systems
- subwoofer Krüger&Matz
- subwoofer Audioengine
- subwoofer Audiotec Fischer
- subwoofer Clarion
- subwoofer Pro-Ject
- subwoofer Fusion
- subwoofer Neumann
- subwoofer Wharfedale
- subwoofer Magnat
- subwoofer Pyle
- subwoofer ELAC
- subwoofer Sonus Faber
- subwoofer Marantz
- subwoofer Sennheiser
- subwoofer Bowers & Wilkins
- subwoofer PreSonus
- subwoofer Monitor Audio
- subwoofer Audio Pro
- subwoofer Vonyx
- subwoofer Alto
- subwoofer Peavey
- subwoofer RCF
- subwoofer Harman Kardon
- subwoofer Aiwa
- subwoofer JL Audio
- subwoofer REL Acoustics
- subwoofer Teufel
- subwoofer Dali
- subwoofer Proel
- subwoofer Hifonics
- subwoofer Focal
- subwoofer Taga Harmony
- subwoofer Kicker
- subwoofer Omnitronic
- subwoofer Mackie
- subwoofer Bluesound
- subwoofer Deaf Bonce
- subwoofer Insignia
- subwoofer Piega
- subwoofer SVS
- subwoofer Arcam
- subwoofer Mac Audio
- subwoofer Infinity
- subwoofer McIntosh
- subwoofer Revel
- subwoofer Dynacord
- subwoofer Orion
- subwoofer Fender
- subwoofer Hertz
- subwoofer Kali Audio
- subwoofer KRK
- subwoofer Atlas Sound
- subwoofer Gemini
- subwoofer Martin
- subwoofer PMC
- subwoofer Sencor
- subwoofer Definitive Technology
- subwoofer Ground Zero
- subwoofer Stinger
- subwoofer PowerBass
- subwoofer Power Dynamics
- subwoofer Kanto
- subwoofer Rockford Fosgate
- subwoofer Canton
- subwoofer TOA
- subwoofer Monacor
- subwoofer Tannoy
- subwoofer Electro-Voice
- subwoofer AudioControl
- subwoofer SPL
- subwoofer Crunch
- subwoofer Match
- subwoofer Indiana Line
- subwoofer HK Audio
- subwoofer Fenton
- subwoofer Sonance
- subwoofer Argon
- subwoofer Cabasse
- subwoofer Audison
- subwoofer Caliber
- subwoofer Sonos
- subwoofer Musway
- subwoofer AV:link
- subwoofer Renegade
- subwoofer Heco
- subwoofer MB Quart
- subwoofer Massive
- subwoofer Nova
- subwoofer Atlantic
- subwoofer QTX
- subwoofer Konig
- subwoofer Boston Acoustics
- subwoofer QSC
- subwoofer ESI
- subwoofer Lanzar
- subwoofer Genelec
- subwoofer Apart
- subwoofer Max
- subwoofer Bazooka
- subwoofer Skytec
- subwoofer Tivoli Audio
- subwoofer Monoprice
- subwoofer Eve Audio
- subwoofer Yorkville
- subwoofer Axton
- subwoofer Nxg
- subwoofer Fostex
- subwoofer Power Acoustik
- subwoofer FBT
- subwoofer Amina
- subwoofer OSD Audio
- subwoofer Andover
- subwoofer Soundstream
- subwoofer PSB
- subwoofer Citronic
- subwoofer LTC
- subwoofer Bowers Wilkins
- subwoofer James
- subwoofer PSSO
- subwoofer Quadral
- subwoofer Wet Sounds
- subwoofer Extron
- subwoofer BW
- subwoofer Helix
- subwoofer Q Acoustics
- subwoofer Adam
- subwoofer Mission
- subwoofer Martin Audio
- subwoofer Morel
- subwoofer Avid
- subwoofer Ecler
- subwoofer Mtx Audio
- subwoofer Aquatic AV
- subwoofer DB Technologies
- subwoofer GoldenEar Technology
- subwoofer Roswell
- subwoofer Velodyne
- subwoofer Chrysalis
- subwoofer Raveland
- subwoofer ANT
- subwoofer IMG Stage Line
- subwoofer Eikon
- subwoofer ESX
- subwoofer Wavemaster
- subwoofer Fluance
- subwoofer RetroSound
- subwoofer Pyramid
- subwoofer On-Q
- subwoofer Sound Ordnance
- subwoofer MadBoy
- subwoofer Planet Audio
- subwoofer Black Hydra
- subwoofer Totem
- subwoofer Energy
- subwoofer Mirage
- subwoofer Poly-Planar
- subwoofer SSV Works
- subwoofer PrecisionPower
- subwoofer Theater Solutions
- subwoofer Mordaunt Short
- subwoofer Triangle
- subwoofer Audiofrog
- subwoofer AudioSource
- subwoofer KLH Audio
- subwoofer Audibax
- subwoofer Proficient
- subwoofer Alphasonik
- subwoofer Cerwin-Vega
- subwoofer BMB
- subwoofer Glemm
- subwoofer ButtKicker
- subwoofer NEAR
- subwoofer Rockustics
Najnowsze instrukcje dla subwoofer

12 Marca 2025

12 Marca 2025

9 Marca 2025

5 Marca 2025

4 Marca 2025

4 Marca 2025

1 Marca 2025

13 Stycznia 2025

13 Stycznia 2025

13 Stycznia 2025