Instrukcja obsługi Phase Technology CI110-SIII

Phase Technology Nie skategoryzowane CI110-SIII

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Phase Technology CI110-SIII (4 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Thank you for purchasing the Phase Technology

® CI110-SIII high denition in-wall

speaker system. The mounting frame of extruded aluminum has a uniquely designed

self-aligning clamping system to secure the ange assembly to the drywall. This

patented design simplies installation and reduces unwanted wall vibration resulting in

improved performance and denition.

All CI Series speakers include self-resetting solid-state PTC protection circuits. This

unique system is able to detect when the speaker is being over-driven and lowers the

speaker volume until the problem is corrected. The PTC device then resets itself for

normal operation.

Regardless of application, serious audiophile listening or home theater, we recommend

that you take the time to read this manual thoroughly before connecting speakers to

your amplier or receiver. In the highly unlikely event that you should experience a

problem with set-up or operation, please contact one of our authorized dealers for

assistance, or contact us directly.

[GETTING STARTED]

FOR EFFICIENT INSTALLATION, YOU WILL NEED THE FOLLOWING TOOLS: • ELECTRIC SCREWDRIVER (DRILL) WITH PHILIPS BIT • TAPE MEASURE

• • 3/32” STANDARD SCREWDRIVER • DRYWALL SAW OR KNIFE • BUBBLE LEVEL • STUD-FINDER PENCIL

Phase Technology® Corporation

8005 W. 110th St., Suite 208

Overland Park, KS 66210

855.663.5600 (Domestic)

+1.913.663.5600 (International)

913.663.3200 (Fax)

SAFETY INSTRUCTIONS 2

INSTALLATION GUIDELINES 3

SPEAKER INSTALLATION 3

CARING FOR YOUR SPEAKER 4

MAINTENANCE AND SERVICE 4

WARRANTY 4

SPECIFICATIONS 4

VARIABLE

AXIS

TWEETER

GRILLE

FLANGE ASSEMBLY

SELF-ALIGNING

CLAMPING SYSTEM

FRAME

CLAMPING

SCREWS

SPEAKER/BAFFLE ASSEMBLY

BAFFLE

ATTACHMENT

SCREWS

(6x)

CI IN-WALL

OWNER’S MANUAL: CI110-SIII

1. Read Instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and other instructions

should be followed.

5. Water and Moisture - The appliance should not be used near

water - for example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool, etc.

6. Carts and Stands - The appliance should be used only with a

cart or stand that is recommended by the manufacturer.

PORTABLE CART WARNING

7. Wall or Ceiling Mounting - The appliance should be mounted

to a wall or ceiling only as recommended by the manufacturer.

8. Ventilation - The appliance should be situated so that its

location or position does not interfere with its proper ventilation.

For example, the appliance should not be situated on a bed, sofa,

rug, or similar surface that may block the ventilation openings;

or placed in a built-in installation, such as a bookcase or cabinet

[SAFETY INSTRUCTIONS] that may impede the ow of air through the ventilation openings.

9. Heat - The appliance should be situated away from heat sources

such as radiators, stoves, or other appliances that produce heat.

10. Power Source - The appliance should be connected to

a power supply only of the type described in the operating

instructions or as marked on the appliance.

11. Power Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or pinched by

items placed up or against them, paying particular attention to

cords at plugs, convenience receptacles, and the point where they

exit from the appliance.

12. Cleaning - The appliance should be cleaned only as

recommended by the manufacturer.

13. Nonuse Periods - The power cord of the appliance should

be unplugged from the outlet when left unused for a long period

of time.

14. Object and Liquid Entry - Care should be taken so that

neither objects fall nor liquids spill into the inside of the appliance.

15. Damage Requiring Service - The application should be

serviced by qualied service personnel when:

a. the power supply cord or the plug has been damaged,

b. objects have fallen onto or liquid has been spilled into the

appliance,

c. the appliance has been exposed to rain,

d. the appliance does not appear to operate normally or exhibits a

marked change in performance, or

e. the appliance has been dropped or the cabinet damaged.

16. Servicing - The user should not attempt to service the

appliance beyond those means described in the operating

instructions. All other servicing should be referred to qualied

service personnel.

17. Grounding or Polarization - Precautions should be taken so

that the grounding or polarization means of an appliance is not

defeated.

Explanation of Graphical Symbols

The lightning ash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the presence

of un-insulated “dangerous voltage: within the product’s

enclosure that may be off sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert you to the presence of important operating

and maintenance (servicing) instructions in the literature

accompanying the appliance.

APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR

USAGE

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

PLUG TO WIDE SLOT, INSERT FULLY.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE

LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRESE ET POUSSER JUSQU AU FOND.

CAUTION: To reduce the risk of electric shock, do not remove cover

(or back). No user-serviceable parts inside. Refer servicing to qualied

service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

[INSTALLATION GUIDELINES]

When selecting the speaker mounting location, it is prudent to take a few extra minutes to carefully inspect and measure the wall or

ceiling area where you intend to mount the CI110-SIII. An inspection of the room or rooms that back-up to the wall you have selected

for mounting the CI110-SIII, can often alert you to potential obstacles. For example, if the wall you want to mount into happens to be

the common wall for a bathroom or kitchen, there is a good chance you will encounter water or sewer pipes in the wall that will not be

detected by a stud-nder. An electronic stud-nder is a useful tool to assist you in selecting the speaker placement, however be cautious

as they often give false readings.

You will want to center the speaker equidistant between studs when possible – if your mounting position places the speaker ange close

to a stud, you may remove the clamp assembly on that side and secure the ange directly to the stud using drywall or wood screws.

Choose the appropriate mounting location for each speaker.

NOTE: When deciding upon a location, consider the following:

• Be certain your speaker wires can be run to or are accessible from these locations.

• Make certain the wall or ceiling material is sturdy enough to support the weight and vibration of the speakers.

• It is recommended that our pre-construction rough-in brackets (part number RB5) be used whenever possible in new construction.

• Be certain the area behind the speaker is free of obstacles such as wall studs, electrical wiring, pipes, etc.

• Each speaker should be positioned properly, relative to the listening area for good coverage.

• Audio performance and room-to-room isolation will be improved if there is some berglass insulation placed loosely behind the

speaker.

[SPEAKER INSTALLATION]

STEP 1: The cutout opening for the CI110-SIII is 20.375” X 8.875”. Place the cutout template against the wall surface and align it using

your bubble level. Hold, tape or staple the template in place and trace around the perimeter of the template with a pencil. Remove the

template and begin cutting on the pencil line.

STEP 2: When the cutout is complete, carefully remove the drywall piece from the opening. You now have a large opening to facilitate

pulling your speaker wire. We recommend 16 gauge or heavier wire be used with the CI110-SIII. Contact your Phase Technology

Dealer for a recommendation.

STEP 3: We recommend a piece of berglass insulation for maximum performance. It is available from your local home center. Be

careful not to overstuff the cutout – one piece the length of the opening will be adequate.

STEP 4: Carefully remove the speaker bafe from the aluminum frame assembly and set aside. Remove the ange assembly from the

packing carton. The ange assembly must make a good seal to insure maximum performance. You will nd two L-shaped foam gasket

pieces in the bottom of the carton. Peel the removable tape from the gasket and stick the adhesive side to the backside of the ange.

Upon installation of the ange assembly gasket will contact the front wall surface to form an airtight seal.

STEP 5: When you remove the ange assembly from the packing carton, you will notice the screws used to retain the clamp assembly

are fully extended. To place the ange assembly into the wall push the clamp assemblies toward the center of the ange opening; the

holes in the ange will allow the mounting screws to tilt toward the center opening enough to insert the ange assembly into the wall.

Insert the right side into the wall cutout and slide the complete assembly to the right. This will enable you to then t the left side clamp

assembly into the cutout. Center the entire assembly in the opening.

STEP 6: Pinch the self-aligning clamp assembly inside the wall until it contacts the backside of the drywall surface. This will force the

three retaining screws to protrude from the front of the ange. Continue to hold the clamp with one hand and use the electric screwdriver

to tighten the center screw of the ange. Once snug, repeat the procedure on the other clamp assembly. Using your level, verify the

mounting frame is correctly aligned in the opening. Make any necessary adjustments then tighten the remaining screws until the frame

is snug and securely clamping the wallboard. Avoid over-tightening the screws.

STEP 7: You are now ready to install the speaker bafe in the ange. When mounting the speaker bafe into the ange, pay particular

attention to insure the speaker is mounted right side up. The rear panel of the bafe is marked for correct installation. Optimum

performance may only be achieved when the speaker is mounted correctly. Plug the connector into the crossover observing the correct

polarity then install the bafe into the ange assembly. Six screws are supplied to secure the bafe to the ange. Hold the bafe in

position until you have at least two screws properly secured.

Specyfikacje produktu

Marka:	Phase Technology
Kategoria:	Nie skategoryzowane
Model:	CI110-SIII

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Phase Technology CI110-SIII, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Nie skategoryzowane Phase Technology

Phase Technology CI520 Instrukcja

26 Marca 2025

Phase Technology CI110-SIII Instrukcja

26 Marca 2025

Phase Technology CI140 Instrukcja

26 Marca 2025

Phase Technology CI-SURRX Instrukcja

26 Marca 2025

Phase Technology CI120 Instrukcja

26 Marca 2025

Phase Technology CI160 Instrukcja

26 Marca 2025

Phase Technology CI-MM3-II Instrukcja

26 Marca 2025

Phase Technology CI130 Instrukcja

26 Marca 2025

Phase Technology CI15 Instrukcja

26 Marca 2025

Phase Technology CI150 Instrukcja

26 Marca 2025

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane

TomTom GO Camper Tour (2nd Generation) Instrukcja

31 Marca 2025

AEG AirFry A9OOAFWM Instrukcja

31 Marca 2025

Atlona AT-HDR-EX-70C-TX Instrukcja

31 Marca 2025

Parallels Plesk Panel 11.5 Instrukcja

31 Marca 2025

Sunny Fresh Art Easel Instrukcja

31 Marca 2025

Crestron CAEN-1X1 Instrukcja

31 Marca 2025

Crestron CAEN-4X2 Instrukcja

31 Marca 2025

Hamlet HXD25TCU31 Instrukcja

31 Marca 2025

Crestron CAEN-7X1 Instrukcja

31 Marca 2025

Crestron CAEN-7X2 Instrukcja

31 Marca 2025