Instrukcja obsługi Phase Technology CI-SURRX

Phase Technology Nie skategoryzowane CI-SURRX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Phase Technology CI-SURRX (4 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
SAFETY INSTRUCTIONS 2
SPEAKER INSTALLATION 3
CARING FOR YOUR SPEAKER 4
MAINTENANCE AND SERVICE 4
WARRANTY 4
SPECIFICATIONS 4
MAGNETS FOR
SECURING GRILLE (10x)
SPEAKER CLAMP
SCREWS (4x)
SPEAKER
CLAMP (4x)
TWEETER
ADJUSTMENT
SPEAKER/ BAFFLE
ASSEMBLY
Thank you for purchasing Phase Technology® CI custom installation
speakers. This tenth generation of high performance ceiling mounted
speakers features the same superb sonic performance as our acclaimed PC
Series cabinet speakers in addition to great exibility and easy installation.
The most striking change to the Series X is a new look with the off-axis
tweeter design. This feature maximizes the speaker’s clarity and imaging
by creating an asymmetrical loading or diffraction pattern, reducing the
amount of diffraction normally caused by a ange-to-ceiling junction. The
net result is the best sonic realism you can buy in an in-ceiling speaker.
All CI Series speakers include self-resetting solid-state PTC protection
circuits. This unique system is able to detect when the speaker is being
over-driven and lowers the speaker volume until the problem is corrected.
The PTC device then resets itself for normal operation. Other features
include our new low prole Micro-Flange grille with magnetic retainers,
liquid-cooled tweeters for greater power handling, moisture-resistant
materials in all of the critical speaker components, galvanized steel speaker
grilles and corrosion resistance hardware.
Regardless of application, serious audiophile listening or home theater, we
recommend that you take the time to read this manual thoroughly before
connecting speakers to your amplier or receiver. In the highly unlikely
event that you should experience a problem with set-up or operation,
please contact one of our authorized dealers for assistance, or contact us
directly.
Phase Technology Corporation
8005 W. 110th St., Suite 208
Overland Park, KS 66210
855.663.5600 (Domestic)
+1.913.663.5600 (International)
913.663.3200 (Fax)
CIX IN-WALL
OWNER’S MANUAL: CI20X • CI70X • CI-SURRX
MICRO-FLANGE GRILLE
2
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and other instructions
should be followed.
5. Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, etc.
6. Carts and Stands - The appliance should be used only with a
cart or stand that is recommended by the manufacturer.
PORTABLE CART WARNING
7. Wall or Ceiling Mounting - The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its
location or position does not interfere with its proper ventilation.
For example, the appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the ventilation openings;
or placed in a built-in installation, such as a bookcase or cabinet
[SAFETY INSTRUCTIONS] that may impede the ow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources
such as radiators, stoves, or other appliances that produce heat.
10. Power Source - The appliance should be connected to
a power supply only of the type described in the operating
instructions or as marked on the appliance.
11. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed up or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they
exit from the appliance.
12. Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.
13. Nonuse Periods - The power cord of the appliance should
be unplugged from the outlet when left unused for a long period
of time.
14. Object and Liquid Entry - Care should be taken so that
neither objects fall nor liquids spill into the inside of the appliance.
15. Damage Requiring Service - The application should be
serviced by qualied service personnel when:
a. the power supply cord or the plug has been damaged,
b. objects have fallen onto or liquid has been spilled into the
appliance,
c. the appliance has been exposed to rain,
d. the appliance does not appear to operate normally or exhibits a
marked change in performance, or
e. the appliance has been dropped or the cabinet damaged.
16. Servicing - The user should not attempt to service the
appliance beyond those means described in the operating
instructions. All other servicing should be referred to qualied
service personnel.
17. Grounding or Polarization - Precautions should be taken so
that the grounding or polarization means of an appliance is not
defeated.
Explanation of Graphical Symbols
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the presence
of un-insulated “dangerous voltage: within the product’s
enclosure that may be off sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert you to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR
USAGE
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
PLUG TO WIDE SLOT, INSERT FULLY.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRESE ET POUSSER JUSQU AU FOND.
CAUTION: To reduce the risk of electric shock, do not remove cover
(or back). No user-serviceable parts inside. Refer servicing to qualied
service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
BIPOLE DIPOLE
[SPEAKER INSTALLATION]
For proper connection and therefore full enjoyment of your new Phase Technology speakers,
we encourage you to read this owners’ manual thoroughly, even if you are very familiar with
installing speakers. Speaker placement is very subjective. Placement follows the guidelines for
the developers of in-ceiling speakers, yet is also guided by personal preferences. The proper
spacing, location and adjustment of in-ceiling speakers are critical for complete enjoyment of
your new speakers. This manual covers these topics thoroughly.
STEP 1: Choose the appropriate mounting location for each speaker.
NOTE: When deciding upon a location, consider the following:
• Be certain your speaker wires can be run to or are accessible from these locations.
• Make certain the wall or ceiling material is sturdy enough to support the weight and vibration
of the speakers.
• It is recommended that our pre-construction rough-in brackets (part number RB-23) be used
whenever possible in new construction.
• Be certain the area behind the speaker is free of obstacles such as wall studs, electrical wiring,
pipes, etc.
• Each speaker should be positioned properly, relative to the listening area for good coverage.
• Audio performance and room-to-room isolation will be improved if there is some berglass
insulation placed loosely behind the speaker.
STEP 2: Using the supplied cutout template, carefully mark the area to be cut out. Using a
drywall knife or saw, cut a hole in the drywall and prepare the speaker wires for connection to
the speaker terminals.
STEP 3: Loosen the bafe clamping screws on the speaker assembly (Figure 1) one turn (counter
clockwise) to release the clamp. Use a level to insure that the ange is square. Next tighten all 4
ange clamp screws evenly to secure the speaker assembly to the wall. It is best to tighten each
screw with the same amount of force (torque). CAUTION: DO NOT OVER TIGHTEN.
STEP 4: Connect the speaker wires to the spring loaded input terminals on the rear (Figure 2)
of the speaker, making sure no loose strands are exposed.
STEP 5: Using some familiar source material, listen to the tweeter’s balance with the level
control in each of its three positions to nd your favorite tonal balance.(Figures 4A-4C)
STEP 6: Carefully replace the grille by pressing it onto the speaker. (Figure 3) The grille will snap
into place using magenets. Enjoy!
3
STEREO FIG. 4A-8 ohms: Use this
conguration to drive one channel (left
OR right) of a stereo pair. Set jumper
plugs in the stereo position. (Fig. 4A)
Connect the right or left signal wire to
the right set of terminals on the rear of
the speaker. Leave the front panel switch
in the Bipole position.
STEREO POINT SOURCE FIG. 4A-8
ohms: Use this conguration to combine
left AND right channels for full delity
sound from a single loud-speaker stereo
source (Fig. 4A). Set jumper plugs in
the stereo position. Connect right and
left signal wires to the spring-loaded
terminals on the rear of the speaker.
Leave the front panel switch in the Bipole
position.
MONO/STEREO FIG. 4B-4 ohms: Use
this conguration to drive one channel
(left OR right) of a stereo pair with a 4
ohm speaker load. Set jumper plugs in
the mono position. (Fig. 4B) Connect the
right or left signal wire to the left set of
posts on the rear of the speaker. Acoustic
output of the speaker is increased by 3
dB in this conguration.
BIPOLE/DIPOLE FIG. 4C-4 ohms:
Use this conguration for home theater
surround applications. For bipole
mode, connect as in the Mono/Stereo
instructions (FIG. 4C): one speaker
to each surround channel. For dipole
mode, connect speaker inputs the same
as Mono/Stereo instructions (FIG. 4C),
but reverse the and connections of + –
the red and black tweeter wires to put
one of the tweeters out of phase.
[FIG. 4A] [FIG. 4B] [FIG. 4C]
CLAMP
SCREW
[FIG. 2]
[FIG. 1]
[FIG. 3]
_
MONO
STEREO STEREO
MONO
MOUNTING DEPTHS
CI20 X, CI70 X, &
CI-SURR X: 3.5” D
CUTOUT
DIMENSIONS
CI20 X, CI70 X,
& CI-SURR X:
11.375” H x
7.375” W

Specyfikacje produktu

Marka: Phase Technology
Kategoria: Nie skategoryzowane
Model: CI-SURRX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Phase Technology CI-SURRX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Nie skategoryzowane Phase Technology

Phase Technology

Phase Technology CI520 Instrukcja

26 Marca 2025
Phase Technology

Phase Technology CI110-SIII Instrukcja

26 Marca 2025
Phase Technology

Phase Technology CI140 Instrukcja

26 Marca 2025
Phase Technology

Phase Technology CI-SURRX Instrukcja

26 Marca 2025
Phase Technology

Phase Technology CI120 Instrukcja

26 Marca 2025
Phase Technology

Phase Technology CI160 Instrukcja

26 Marca 2025
Phase Technology

Phase Technology CI-MM3-II Instrukcja

26 Marca 2025
Phase Technology

Phase Technology CI130 Instrukcja

26 Marca 2025
Phase Technology

Phase Technology CI15 Instrukcja

26 Marca 2025
Phase Technology

Phase Technology CI150 Instrukcja

26 Marca 2025

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane

TomTom

TomTom GO Camper Tour (2nd Generation) Instrukcja

31 Marca 2025
AEG

AEG AirFry A9OOAFWM Instrukcja

31 Marca 2025
Atlona

Atlona AT-HDR-EX-70C-TX Instrukcja

31 Marca 2025
Parallels

Parallels Plesk Panel 11.5 Instrukcja

31 Marca 2025
Sunny

Sunny Fresh Art Easel Instrukcja

31 Marca 2025
Crestron

Crestron CAEN-1X1 Instrukcja

31 Marca 2025
Crestron

Crestron CAEN-4X2 Instrukcja

31 Marca 2025
Hamlet

Hamlet HXD25TCU31 Instrukcja

31 Marca 2025
Crestron

Crestron CAEN-7X1 Instrukcja

31 Marca 2025
Crestron

Crestron CAEN-7X2 Instrukcja

31 Marca 2025