Instrukcja obsługi Perlick H80CIMS-ADR

Perlick Maszyna do lodu H80CIMS-ADR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Perlick H80CIMS-ADR (34 stron) w kategorii Maszyna do lodu. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/34
FORM NO. Z2547
REV. A-05/01/2018
PERLICK RESIDENTIAL UNDERCOUNTER ICE MAKERS
To prevent appliance damage and injury, read these instrucons
thoroughly prior to installaon.
H80CIM/-AD
PRODUCT MANUAL
H80CIM* 15” SIGNATURE SERIES CUBELET ICE MAKER
H80CIM*-AD 15” ADA COMPLIANT CUBELET ICE MAKER
1A5237-01
PERLICK RESIDENTIAL PRODUCT MANUALUNDERCOUNTER CUBELET ICE MAKER
2 | perlick.com/residential
INTRODUCTION
Congratulaons on your purchase of a Perlick Residenal
undercounter appliance. This manual has been prepared to
assist you in the installaon of your undercounter ice maker.
We dedicate considerable me to ensure that our products
provide the highest level of customer sasfacon. We thank
you for selecng Perlick products for your home and assure you
of our connuing interest in your sasfacon.
WARRANTY REGISTRATION
To register your Perlick product, visit our website at
www.perlick.com/RegisterMyPerlick and ll out the form.
Once completed, click on the ‘Submit Warranty Registraon’. Be
sure to register your product immediately upon installaon to
receive the warranty from installaon date instead of shipment
date. If le blank, the date will revert back to shipment date.
CONTENTS
3 Safety Consideraons
Prior To Installaon5
Niche / Product Dimensions / Connecons6
10 Construcon
11 Electrical / Refrigerant
12 Installaon Instrucons
20 Setup
21 Electrical Connecon
22 Water Supply And Drain Connecons
23 Final Checklist
24 Operang Instrucons
25 Startup
26 Maintenance
32 Preparing The Appliance For Periods Of Non-Use
33 Disposal
PERLICK RESIDENTIAL PRODUCT MANUALUNDERCOUNTER CUBELET ICE MAKER
perlick customer service (800)558-5592 | 3
DANGER
!
SAFETY CONSIDERATIONS
IMPORTANT SAFETY INFORMATION
This manual should be read carefully before the ice maker
is installed and operated. Only qualied service technicians
should install, service, and maintain the ice maker. Read the
warnings contained in this booklet carefully as they give
important informaon regarding safety. Please retain this
booklet for any further reference that may be necessary.
DAN This indicates that a hazardous situaon
may occur when instrucons are not followed. It is imperive
that direcons in this guide are followed to prevent possible
serious injury or death.
This indicates a situaon where minor
injury, product or cabinet damage may occur if the following
instrucons are not followed.
This highlights informaon that is of
signicant importance.
WARNING
DANGER
!
CAUTION
This ice maker should be desned only to
the use for which it has been expressly conceived. Any other
use should be considered improper and therefore dangerous.
The manufacturer cannot be held responsible for eventual
damage caused by improper, incorrect, and unreasonable
use. To reduce the risk of death, electric shock, serious injury,
or re, follow basic precauons including the following:
Only qualied service technicians should
install and service the appliance.
The appliance must be installed in
accordance with applicable naonal, state, and local codes
and regulaons.
The appliance requires an independent
power supply of proper capacity. See the nameplate for
electrical specicaons. Failure to use an independent power
supply of proper capacity can result in a tripped breaker,
blown fuse, damage to exisng wiring, or component failure.
This could lead to heat generaon or re.
THE APPLIANCE MUST BE GROUNDED:
The appliance is equipped with a NEMA 5-15 three-prong
grounding plug to reduce the risk of potenal shock hazards.
It must be plugged into a properly grounded, independent
3-prong wall outlet. If the outlet is a 2-prong outlet, it is your
personal responsibility to have a qualied electrician replace
it with a properly grounded, independent 3-prong wall outlet.
Do not remove the ground prong from the power cord and
do not use an adapter plug. Failure to properly ground the
appliance could result in death or serious injury.
Do not use an extension cord.
To reduce the risk of electric shock, do not
touch the control switch or plug with damp hands. Make sure
the control switch is in the “OFF” posion before plugging in
or unplugging the appliance.
Do not use an appliance with a damaged
power cord. The power cord should not be altered, jerked,
bundled, weighed down, pinched, or tangled. Such acons
could result in electric shock or re. To unplug the appliance,
be sure to pull the plug, not the cord, and do not jerk the
cord.
Do not make any alteraons to the
appliance. Alteraons could result in electric shock, injury,
re, or damage to the appliance.
Do not place ngers or any other objects
into the ice discharge opening.
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!

Specyfikacje produktu

Marka: Perlick
Kategoria: Maszyna do lodu
Model: H80CIMS-ADR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Perlick H80CIMS-ADR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do lodu Perlick

Perlick

Perlick H50IMS-LC Instrukcja

2 Października 2024
Perlick

Perlick H50IM-ADR Instrukcja

30 Września 2024
Perlick

Perlick H80CIMS-ADR Instrukcja

30 Września 2024
Perlick

Perlick H50IM-R Instrukcja

30 Września 2024
Perlick

Perlick H50IM-ADL Instrukcja

30 Września 2024
Perlick

Perlick H80CIMW Instrukcja

30 Września 2024
Perlick

Perlick H50IMW-AD Instrukcja

30 Września 2024
Perlick

Perlick H50IMS-L Instrukcja

30 Września 2024
Perlick

Perlick H80CIMS-ADL Instrukcja

30 Września 2024
Perlick

Perlick H50IMS-ADL Instrukcja

30 Września 2024

Instrukcje Maszyna do lodu

Najnowsze instrukcje dla Maszyna do lodu

Spaceman

Spaceman 6250 Instrukcja

12 Stycznia 2025
Beper

Beper 70257 Instrukcja

11 Stycznia 2025
U-Line

U-Line U-3018CLRINT-00B Instrukcja

11 Stycznia 2025
Koenic

Koenic KIM 91221 B Instrukcja

11 Stycznia 2025
Eldom

Eldom Cube KS200 Instrukcja

11 Stycznia 2025
Eldom

Eldom Cristall KS210 Instrukcja

11 Stycznia 2025
Edgestar

Edgestar IB250SSOD Instrukcja

10 Stycznia 2025
Edgestar

Edgestar IB121SS Instrukcja

10 Stycznia 2025
Edgestar

Edgestar IB250BL Instrukcja

10 Stycznia 2025
Summit

Summit BIM182 Instrukcja

9 Stycznia 2025