Instrukcja obsługi Perlick H50IMS-LC
Perlick
Ijsmachine
H50IMS-LC
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Perlick H50IMS-LC (31 stron) w kategorii Ijsmachine. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/31
MODELS:
H50IMS-R
H50IMS-L
H50IMW
H50IMS-ADL
H50IMS-ADR
H50IMW-AD
PERLICK
SELF-CONTAINED ICE MAKER
PRODUCT MANUAL
Issued: 11-2-2009
2
IMPORTANT
This manual should be read carefully before the icemaker is installed and
operated. Only qualied service technicians should install, service, and
maintain the icemaker. Read the warnings contained in this booklet carefully as
they give important information regarding safety. Please retain this booklet for
any further reference that may be necessary.
CONTENTS
Important Safety Information ................................................................................................. 3
I. Specications ..................................................................................................................... 4
A. Construction .................................................................................................................. 4
B. Nameplate Rating ......................................................................................................... 5
C. Dimensions/Connections .............................................................................................. 6
1. H50IMS-R, H-50IMS-L ............................................................................................. 6
2. H50IMW ................................................................................................................... 7
3. H50IMS-ADL, H50IMS-ADR .................................................................................... 8
4. H50IMW-AD ............................................................................................................. 9
II. Installation and Operating Instructions ............................................................................ 10
A. Checks Before Installation .......................................................................................... 10
B. Location ...................................................................................................................... 10
1. General .................................................................................................................. 10
2. Built-In Installation Site ........................................................................................... 11
C. Door Overlay Panel Fabrication and Attachment (H50IMW, H50IMW-AD) ................ 12
D. Setup .......................................................................................................................... 20
E. Electrical Connection .................................................................................................. 20
F. Water Supply and Drain Connections ......................................................................... 21
G. Final Checklist ........................................................................................................... 22
H. Startup ........................................................................................................................ 23
III. Cleaning and Maintenance ............................................................................................. 24
A. Cleaning and Sanitizing Instructions ........................................................................... 24
1. Cleaning Solution ................................................................................................... 24
2. Cleaning Procedure ............................................................................................... 24
3. Sanitizing Solution .................................................................................................. 26
4. Sanitizing Procedure .............................................................................................. 26
B. Maintenance ............................................................................................................... 29
C. Preparing the Icemaker for Long Storage .................................................................. 30
3
Important Safety Information
Throughout this manual, notices appear to bring your attention to situations which could
result in death, serious injury, or damage to the unit.
WARNING Indicates a hazardous situation which could result in death or
serious injury.
CAUTION Indicates a situation which could result in damage to the unit.
IMPORTANT Indicates important information about the use and care of the
unit.
WARNING
This icemaker should be destined only to the use for which it has been
expressly conceived. Any other use should be considered improper and
therefore dangerous. The manufacturer cannot be held responsible for
eventual damage caused by improper, incorrect, and unreasonable use.
To reduce the risk of death, electric shock, serious injury, or re, follow
basic precautions including the following:
• This unit requires an independent power supply. See the nameplate for
proper voltage and breaker/fuse size. Failure to use a proper breaker or fuse
can result in a tripped breaker, blown fuse, or damage to existing wiring. This
could lead to heat generation or re.
• This unit is equipped with a THIS APPLIANCE MUST BE GROUNDED:
3-prong grounding plug to reduce the risk of potential shock hazards. It
must be plugged into a properly grounded, independent wall outlet. If the
outlet is a 2-prong outlet, it is your personal responsibility to have a qualied
electrician replace it with a properly grounded, independent 3-prong wall
outlet. Do not remove the ground prong from the power cord and do not use
an adapter plug.
• Do not use an extension cord.
• Make sure the control switch is in the "OFF" position before plugging in or
unplugging the unit to reduce the risk of electric shock.
• Do not use a unit with a damaged power cord. The power cord should not be
altered, jerked, bundled, weighed down, pinched, or tangled. Such actions
could result in electric shock or re. To unplug the unit, be sure to pull the
plug, not the cord, and do not jerk the cord.
• To reduce the risk of electric shock, do not touch the plug or control switch
with damp hands.
• This unit should be disassembled or repaired only by qualied service
personnel to reduce the risk of electric shock, injury, or re.
• Do not make any alterations to the unit. Alterations could result in electric
shock, injury, re, or damage to the unit.
Specyfikacje produktu
Marka: | Perlick |
Kategoria: | Ijsmachine |
Model: | H50IMS-LC |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Perlick H50IMS-LC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Ijsmachine Perlick
2 Października 2024
Instrukcje Ijsmachine
- Ijsmachine Hoshizaki
- Ijsmachine DeLonghi
- Ijsmachine Dometic
- Ijsmachine Bosch
- Ijsmachine Whirlpool
- Ijsmachine Severin
- Ijsmachine Medion
- Ijsmachine Hendi
- Ijsmachine Quigg
- Ijsmachine Maytag
- Ijsmachine Domo
- Ijsmachine GE
- Ijsmachine Brandt
- Ijsmachine Danby
- Ijsmachine Unold
- Ijsmachine Viking
- Ijsmachine Kenwood
- Ijsmachine Trisa
- Ijsmachine Ninja
- Ijsmachine Cuisinart
- Ijsmachine Wilfa
- Ijsmachine Krups
- Ijsmachine Emerio
- Ijsmachine H.Koenig
- Ijsmachine Melissa
- Ijsmachine OneConcept
- Ijsmachine Klarstein
- Ijsmachine KitchenAid
- Ijsmachine Camry
- Ijsmachine Steba
- Ijsmachine NewAir
- Ijsmachine Bartscher
- Ijsmachine Continental Edison
- Ijsmachine Delta
- Ijsmachine Bifinett
- Ijsmachine DCG
- Ijsmachine Hamilton Beach
- Ijsmachine Clatronic
- Ijsmachine Ariete
- Ijsmachine Princess
- Ijsmachine Sunbeam
- Ijsmachine Elta
- Ijsmachine Solis
- Ijsmachine DCS
- Ijsmachine JennAir
- Ijsmachine Marvel
- Ijsmachine Lagrange
- Ijsmachine Clas Ohlson
- Ijsmachine Aigger
- Ijsmachine Aigger Montiss
- Ijsmachine Progress
- Ijsmachine Trebs
- Ijsmachine Boretti
- Ijsmachine Buffalo
- Ijsmachine Carpigiani
- Ijsmachine FriFri
- Ijsmachine Primo
- Ijsmachine Montiss
- Ijsmachine Edgestar
- Ijsmachine Magimix
- Ijsmachine Zoku
- Ijsmachine Nissei
- Ijsmachine SPT USA
- Ijsmachine Springlane
- Ijsmachine Micromaxx
- Ijsmachine Avantco
- Ijsmachine Spaceman
- Ijsmachine Ice-O-Matic
- Ijsmachine Nemox
- Ijsmachine Temptech
- Ijsmachine WestBend
- Ijsmachine Pifco
- Ijsmachine Cattabriga
- Ijsmachine Girmi
- Ijsmachine Studio
Najnowsze instrukcje dla Ijsmachine
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
2 Października 2024
30 Września 2024