Instrukcja obsługi Panasonic WV-V1330LK

Panasonic kamera bezpieczeństwa WV-V1330LK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panasonic WV-V1330LK (4 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Installation Guide

Network Camera

Model No. WV-V2530LK/WV-V1330LK

FDu1016-0 PGQX2118ZA

Printed in China

WV-V2530LK

(Dome type)

WV-V1330LK

(Bullet type)

z For information about how to perform the settings and how to operate the camera, refer to the operation manual on the provided CD-ROM. zBefore attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.

Microsoft, Windows, Windows Media, Internet Explorer, and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

All other trademarks identified herein are the property of their respective owners.

Network security

As you will use this unit connected to a network, your attention is called to the following security risks.

1 Leakage or theft of information through this unit

2 Use of this unit for illegal operations by persons with malicious intent

3 Interference with or stoppage of this unit by persons with malicious intent

It is your responsibility to take precautions such as those described below to protect yourself

against the above network security risks.

zUse this unit in a network secured by a firewall, etc.

zIf this unit is connected to a network that includes PCs, make sure that the system is not

infected by computer viruses or other malicious entities (using a regularly updated anti-virus

program, anti-spyware program, etc.).

zTo prevent unauthorized access, use user-authentication, set user names and passwords, and

limit which users can log in.

zApply measures such as user authentication to protect your network against leakage or theft of

information, including image data, authentication information (user names and passwords), alarm

E-mail information, FTP server information and DDNS server information.

zAfter the unit is accessed by the administrator, make sure to close the browser.

zChange the administrator password periodically. Additionally, save user authentication

information (user names and passwords) in such a way that it is kept out of the hands of third

parties.

zDo not install the camera in locations where the camera or the cables can be destroyed or

damaged by persons with malicious intent.

Precautions

WARNING

•Refer installation work to the dealer.

Installation work requires technique and experiences. Failure to observe this may cause fire,

electric shock, injury, or damage to the product.

• Be sure to consult the dealer.

•Turn the power off when do wiring of this product.

Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire.

•Correctly perform all wiring.

Short circuits in the wiring or incorrect wiring may cause fire or electrical shock.

•Stop the operation immediately when something is wrong with this product.

When smoke goes up from the product, the smell of smoke comes from the product, or the

exterior of the product has deteriorated, continued use will cause a fire or fall of the product

resulting in injury, or damage to the product.

• In this case, turn the power off immediately and contact qualified service personnel for service.

•Select an installation area that can support the total weight.

Selecting an inappropriate installation surface may cause this product to fall down or topple over,

resulting in injury or accidents.

• Installation work shall be started after sufficient reinforcement.

•Periodic inspections shall be conducted.

Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents.

• Consult the dealer for the inspections.

•Do not install this product in locations subject to vibration.

Loosening of mounting screws or bolts may cause a fall of the product resulting in injury or accidents.

•Install this product in a location high enough to avoid people and objects from

bumping the product.

Failure to observe this may cause injury.

•Do not attempt to disassemble or modify this product.

Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or inspections.

•The screws and bolts must be tightened to the specified torque.

Failure to observe this may cause a drop resulting in injury or accidents.

•Do not insert any foreign objects.

Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, enter

inside the unit. Turn the power off immediately and contact qualified service personnel for service.

•Do not use this product in an inflammable atmosphere.

Failure to observe this may cause an explosion resulting in injury.

•Avoid installing this product in the locations where salt damage occurs or

corrosive gas is produced.

Otherwise, the mounting portions will deteriorate and accidents such as a fall of the product may occur.

•Do not strike or give a strong shock to this product.

Failure to observe this may cause fire or injury.

•Do not install or clean the camera, or touch this product, the power cable or the

connected cables during thunder storms.

Failure to observe this may cause electric shock.

•Keep SDXC/SDHC/SD memory cards away from infants and children.

Otherwise, they may swallow the cards by mistake. In this case, consult a doctor immediately.

CAUTION

•Turn the power off when cleaning this product.

Failure to observe this may cause injury.

Precautions for use

This product has no power switch.

When turning off the power, disconnect the power supply from the12 V DC power supply or the PoE device.

To keep on using with stable performance

Do not use this camera in hot and humid conditions for a long time. Failure to observe this causes

component degradation resulting in life shortening of this product.

Do not expose this camera to direct heat sources such as a heater.

Do not touch the lens with your bare hands.

A dirty lens causes deterioration of picture quality.

Handle this camera with care.

Do not drop this camera, nor apply shock or vibration to this camera. Failure to observe this may

cause trouble. If a strong shock or vibration is applied to the enclosure, it may cause damage or

allow water to enter this product.

About the battery

A battery is installed inside the camera. Do not leave the battery exposed in environments of

excessive heat as a result of sunlight or fire.

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean

that used electrical and electronic products and batteries must not be mixed with

general household waste.

For proper treatment, recovery and recycling of old products and used batteries,

please take them to applicable collection points in accordance with your national

legislation.

By disposing of them correctly, you will help to save valuable resources and prevent

any potential negative effects on human health and the environment.

For more information about collection and recycling, please contact your local

municipality.

Penalties may be applicable for incorrect disposal of this waste, in accordance with

national legislation.

Note for the battery symbol (bottom symbol)

This symbol might be used in combination with a chemical symbol. In this case it

complies with the requirement set by the Directive for the chemical involved.

Important safety instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

6) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

7) Only use attachments/accessories specified by the manufacturer.

8) Unplug this apparatus during lightning storms or when unused for long periods of time.

9) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

Main functions

●2 Megapixel Full-HD fixed lens network camera

●H.265, H.264 and MJPEG triple-stream encoding

H.265 outputs and H.264 output can be provided.

●Wide-angle lens with day/night functionality and built-in IR-LED

Limitation of liability

THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF

THE THIRD PARTY’S RIGHT.

THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL

ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE

IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).

Disclaimer of warranty

IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY

PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT,

FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:

(1) ANY LOSS OR DAMAGE, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL,

CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;

(2) ANY INCONVENIENCE, LOSS, OR DAMAGE CAUSED BY INAPPROPRIATE USE OR

NEGLIGENT OPERATION OF THE USER;

(3) ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED DISASSEMBLE, REPAIR OR

MODIFICATION OF THE PRODUCT BY THE USER, REGARDLESS OF THE CAUSE OF THE

MALFUNCTION OR TROUBLE;

(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO

ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;

(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT

OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;

(6) ANY CLAIM OR ACTION FOR DAMAGES BROUGHT BY ANY PERSON OR ORGANIZATION

AS A PHOTOGRAPHED SUBJECT DUE TO VIOLATION OF PRIVACY CONCERNING A

SURVEILLANCE CAMERA’S PICTURE OR SAVED DATA, FOR SOME REASON (INCLUDING

USE WHEN USER AUTHENTICATION ON THE AUTHENTICATION SETTING SCREEN IS SET

TO OFF), BECOMING PUBLIC OR BEING USED FOR ANY PURPOSE;

(7) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE (INCLUDING INITIALIZATION OF

THE PRODUCT DUE TO FORGOTTEN AUTHENTICATION INFORMATION SUCH AS A USER

NAME AND PASSWORD).

Open Source Software

zThis product contains open source software licensed under GPL (GNU General Public License),

LGPL (GNU Lesser General Public License), etc.

zCustomers can duplicate, distribute and modify the source code of the software under license of

GPL and/or LGPL.

zRefer to the “readme.txt” file on the provided CD-ROM for further information about open source

software licenses and the source code.

zPlease note that Panasonic shall not respond to any inquiries regarding the contents of the

source code.

Except for open source software licensed under GPL/LGPL and so on, distributing, copying,

disassembling, reverse compiling and reverse engineering of the software provided with this

product are all expressly prohibited. In addition, exporting any software provided with this product

violating export laws is prohibited.

Product disposal/transfer

Data saved on this product or a storage device used with this product may lead to personal

information leakage. When it is necessary to dispose or give this product to someone, even when

for repair, make sure that there is no data on this product. When abandoning the memory media, it

is recommended to destroy it physically after deleting data by PC.

Cleaning this product body

Be sure to turn off the power before cleaning. Failure to observe this may cause injury. Do not use benzine,

thinner, alcohol, or any other types of solvents or detergents. Otherwise, it may cause discoloration. When

using a chemical cloth for cleaning, read the caution provided with the chemical cloth product.

About the MOS image sensor

zWhen continuously shooting a bright light source such as a spotlight, the color filter of the MOS

image sensor may have deteriorated and it may cause discoloration. Even when changing the

fixed shooting direction after continuously shooting a spotlight for a certain period, the

discoloration may remain.

zWhen shooting fast-moving subjects or performing panning/tilting operations, objects crossing

the shooting area may look to be bending askew.

AVC Patent Portfolio License

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE

PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE

REMUNERATION TO

(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR

(ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL

ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC

VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.

ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.

SEE HTTP://WWW.MPEGLA.COM

Equipment classification and power source indication label

Refer to the indication label on the bottom side of this unit for the equipment classification, power

source, and other information.

Standard accessories

Confirm the following items are included in the camera’s packaging.

Installation Guide (this document) 1 pc. ..........

Warranty card 1 set ........................................

RJ45 waterproof connector 1 bag. .................

Template (Dome type only) 1 pc. .....................

Hexagonal wrench 1 pc. .................................

CD-ROM 1 pc. ...............................................

Connection

Device external cable

12V DC

GND

Power input port

Port Port Name Note

Port 1Power input port Power port. Input 12V DC.

When a PoE power supply is used to power the camera, the

power input port is not used.

Port 2I/O port Alarm signal input/output

Port 3LAN (Network port) RJ45 waterproof jack. Connect to standard Ethernet cable.

NOTE: Some devices do not support PoE power supply.

Port 4Audio input port

(White)

Input audio signal, receive analog audio signal from sound

pick-up.etc

Port 5Audio output port

(Yellow)

Output audio signal to speakers.etc

* Port 1245: Apply appropriate waterproofing.

Port

Name Color Port name Function Description

I/O Port Yellow ALARM_IN1 Alarm input port, receive on-off signal

of external alarm source.

Orange ALARM_OUT1 Alarm output port, output alarm signal

to alarm device.

Gray ALARM_GND Connect ground

Alarm input, output description:

Step 1 Connect alarm input device to the alarm input of I/O cable.

Step 2 Connect alarm output device to the alarm output of I/O cable, alarm output is collector

open circuit output which connects 10K resistor to 3.3V externally.

Step 3 Open the Web, set alarm input and output correspondingly. Alarm input on WEB

corresponds to I/O cable on device. When there is alarm, alarm input device will generate

signal of high and low level. Set corresponding NO and NC inputs.

Step 4 Set the WEB alarm output. The alarm output is for the alarm output port of the device. It is

the alarm output port of the I/O cable.

z For information about how to perform the settings and how to operate the camera,

refer to the operation manual on the provided CD-ROM.

zBefore attempting to connect or operate this product, please read these instructions

carefully and save this manual for future use.

Panasonic Corporation

http://www.panasonic.com

Panasonic System Networks Co., Ltd.

Fukuoka, Japan

Authorised Representative in EU:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

For Europe and other countries:For U.S. and Canada:

Panasonic System Communications

Company of North America,

Unit of Panasonic Corporation

of North America

www.panasonic.com/business/

For customer support, call 1.800.528.6747

Two Riverfront Plaza, Newark, NJ 07102-5490

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga,

Ontario, L4W 2T3 Canada

(905)624-5010

www.panasonic.ca

: Direct current symbol

WARNING:

zTo prevent injury, this apparatus must be

securely attached to the wall/ceiling in

accordance with the installation guide.

zAll work related to the installation of this

product should be made by qualified

service personnel or system installers.

zThe installation shall be carried out in

accordance with all applicable installation

rules.

zThe connections should comply with

local electrical code.

zBatteries (battery pack or batteries

installed) shall not be exposed to

excessive heat such as sunlight, fire or

the like.

CAUTION:

zAny changes or modifications not

expressly approved by the party

responsible for compliance could void

the user’s authority to operate the

equipment.

zThe network camera is only intended for

a connection to an ethernet or PoE

network without routing to the outside

plant.

NOTE: This equipment has been tested and

found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the

FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference when the equipment is

operated in a commercial environment.

This equipment generates, uses, and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential

area is likely to cause harmful interference in

which case the user will be required to

correct the interference at his own expense.

FCC Caution: To assure continued

compliance, (example - use only shielded

interface cables when connecting to

computer or peripheral devices). Any

changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority

to operate this equipment.

For U.S.A.

The model number and serial number of this

product may be found on the surface of the

unit.

You should note the model number and

serial number of this unit in the space

provided and retain this book as a

permanent record of your purchase to aid

identification in the event of theft.

Model No.

Serial No.

For U.S.A.

CAN ICES-3(A)/NMB-3(A)

For Canada

Framework and dimension

Please refer to the following figure for dimension information.

Side view Bottom view

ø110 mm {ø4-11/32 inches}

81 mm

{3-3/16 inches}

ø98.2 mm {ø3-7/8 inches}

3-ø4.7 mm

{3/16 inches}

120°

Nameplate

Dome cover

Enclosure

External cable

Device Installation

Secure the camera with 3 screws (M4) (locally procured).

IMPORTANT:

zBefore starting the connection, turn off the power of the devices to be connected.

zProcure 3 screws (M4) to secure the camera to a ceiling or a wall, according to the material of

the installation area. In this case, wood screws and nails should not be used.

zRequired pull-out capacity of a single screw or anker is 196 N {44 lbf} or more.

Step 1 Open a hole for installing and cabling

the camera on the ceiling or wall.

Remove the template from the carton box and use it to

open holes in the positions for installation screws and

the wiring opening to pass cabling through.

NOTE:

zThe position of the Panasonic logo when the enclosure is

attached is roughly halfway between the mounting holes.

Orient the template to match the desired logo position.

zDetermine the screw hole diameter based on screw

specifications.

zTo run cabling or make connections behind a ceiling

or wall, drill a hole in the wiring opening position

indicated on the template. If it is necessary to run

the cabling to the side, it can be arranged in the side

wiring direction. Orient the template to match the

desired wiring direction.

Step 2 Remove the enclosure from the camera.

Use the hexagonal wrench (accessory) to loosen the

three enclosure fixing screws. Then remove the

enclosure from the camera.

Step 3 If necessary, install a Micro SD memory

card in the camera.

1 Confirm the position of the Micro SD memory card

socket.

2 Tilt the camera slightly on the PAN/TILT axis as

shown in the figure to create an opening to access

the Micro SD memory card socket.

3 Slide the cover of the Micro SD memory card socket

and raise it as shown in the figure.

4 Place the Micro SD memory card in the slot, close

the cover, and slide it back to its original position to

secure the Micro SD memory card.

NOTE:

zBe careful not to touch the wiring portion of the

circuit board when you raise the cover of the Micro

SD memory card socket.

zMake sure the Micro SD memory card is mounted

with its label side visible.

Step 4 Connect the camera.

Connect the RJ45 waterproof connector to the camera’s RJ45

waterproof jack. (Refer to steps 4 and 5 in “Assembling

RJ45 waterproof connector”.)

If necessary, also connect to the power port, I/O port, Audio

input port and Audio output port.

Step 5 Attach the camera to the ceiling or wall.

Attach the camera using the three screws (locally procured) on

the ceiling or wall.

NOTE:

zRequired pull-out capacity of a single screw or anker is

196N {44lbf} or more.

zAfter connection, push extra cabling through the hole in the

ceiling or wall to adjust the length.

Step 6 Turn the power on and check the screen on

the computer.

Turn on power from the 12 V DC power supply or PoE device

and operate the camera. Check video from the camera on the

computer screen and refer to “Network Configuration” on the

right side of this document.

Step 7 Adjust the camera angle.

Adjust the camera angle by moving it on the PAN, TILT, and

YAW axes as you check the video on the computer screen.

Step 8 Attach the enclosure.

Use the hexagonal wrench (accessory) to tighten the three

enclosure fixing screws to secure the enclosure on the

camera. Finally, remove the protective sheet.

(Recommended tightening torque: 0.78N·m {0.58lbf·ft})

Template

Side

wiring

direction Wiring opening center

Hexagonal

wrench

(accessory)

Enclosure fixing screws × 3

Enclosure

Micro SD

memory card

(Label side )

Micro SD

memory card socket

INITIAL SET

button

Three screws

(locally procured)

Sensor

YAW

PAN

TILT

Hexagonal wrench

(accessory)

Enclosure

fixing screws

× 3

Enclosure

WV-V2530LK WV-V1330LK

Framework and dimension

Please refer to the following figure for dimension information.

165 mm {6-1/2 inches}

92 mm {3-5/8 inches}

71 mm

{2-25/32 inches}

3-ø4.5 mm

{3/16 inches}

ø56 mm

{2-7/32 inches}

ø70 mm

{2-3/4 inches}

Side view Rear view

Device Installation

Secure the camera with 3 screws (M4) (locally procured).

IMPORTANT:

zBefore starting the connection, turn off the power of the devices to be connected.

zProcure 3 screws (M4) to secure the camera to a ceiling or a wall, according to the material of

the installation area. In this case, wood screws and nails should not be used.

zRequired pull-out capacity of a single screw is 196N {44lbf} or more.

Sunshade

Screw (M4) ×3

(locally procured)

Wall or Ceiling

Locking screw

RJ45 Waterproof jack

Power port

Camera body

* The figure shows the camera with

the sunshade extended.

Step 1 Open a hole for cabling in the ceiling or wall.

Refer to the dimensional diagram of the base portion of the camera above and mark the hole

positions on the ceiling or wall, then drill holes for the installation screws and the center position to

pass cabling through.

NOTE:

zDetermine the screw hole diameter based on screw specifications.

zAs the cabling hole diameter, open a hole in the center of the base portion of the camera.

Step 2 Connect the camera.

Connect the RJ45 waterproof connector to the camera’s RJ45 waterproof jack. (Refer to steps 4

and 5 in “Assembling RJ45 waterproof connector”.)

If necessary, also connect the plug of an AC adaptor for 12 V DC power to the power port.

Step 3 Installing the camera.

Loosen the locking screw and fix the camera to

the ceiling or wall with three screws (M4) while

panning and tilting of the camera as shown to

the right.

NOTE:

After connection, push extra cabling through the

hole in the ceiling or wall to adjust the length.

Step 4 Turn the power on and check

the screen on the computer.

Turn on power from the 12 V DC power supply

or PoE device and operate the camera. Check

video from the camera on the computer screen

and refer to “Network Configuration” on the right

side of this document.

Step 5 Adjust the camera angle.

Adjust the camera angle as you check video on the computer screen. Turn the base of the camera

to PAN, or move the camera itself to adjust TILT or YAW, as shown at upper right.

Adjust the PAN, TILT and YAW angles of the camera so that the sunshade fixing screw is positioned

immediately above the camera.

Finally, tighten the locking screw to secure the camera’s position.

(Recommended tightening torque: 0.78 N·m {0.58lbf·ft})

NOTE:

zTo reset the WV-V1330LK, you need to remove the front cover from the camera and press the

“INITIAL SET button” inside. Refer to our website (http://security.panasonic.com/library/v/en/) for

details on this procedure.

PAN

TILT

YAW

Sensor

Locking screw

Sunshade fixing screw

Front cover

Network Configuration

Configure the setting of the camera after temporarily invalidating the firewall software. Once the

camera configuration is completed, return to the original state.

Contact the network administrator or your Internet service provider for information about configuring

the settings of the network.

[1] Insert the provided CD-ROM into the CD-ROM drive of your PC.

Double click the “CDLauncher.exe” file on the CD-ROM.

zThe License Agreement will be displayed. Read the

Agreement and choose “I accept the term in the

license agreement”, and click [OK].

 The launcher window will be displayed.

NOTE:

zRefer to “Using the CD-ROM” in the Operating

Instructions on the provided CD-ROM for further

information about CDLauncher.

[2] Click the [Run] button next to [IP Setting Software].

 [Panasonic IP Setting] screen will be displayed. The MAC Address / IP address of the detected

camera will be displayed.

[3] Select the camera you want to configure ( ), and click [Access Camera] ( ).1 2

NOTE:

zSelect the camera with same MAC address as the

MAC address printed on the camera that you want to

configure.

zTo change the IP address in step , select [Network [3]

Settings] (3) and set the address before clicking

[Access Camera] (2).

[4] When the administrator registration window is displayed, enter “User name”,

“Password” and “Retype password” by following the instructions displayed on

the screen, and then click the [Set] button.

Please keep your user name and password in a safe

place free from public view to ensure security. After

completing the registration, the camera will automatically

be re-connected and the authentication window will be

displayed. Enter the registered user name and password.

The default setting of user authentication is “On”.

IMPORTANT:

zWhen the camera is used over the Internet, setting user authentication to “Off” may lead to

unintended access by a third party. Please leave user authentication set to “On”.

[5] If “Please click here to download and install the plug-in.” is displayed in Live

screen, follow the instructions to start the installation.

[6] When the live video of the camera is displayed, the network access is complete.

NOTE:

For more information on the following content, refer to the Operating Instructions.

zPlease set [Date/time] on the [Basic] screen of “Setup” before using the camera.

zThe default of audio is disable. When necessary, please set [Audio] on the [Image/Audio] screen

of “Setup”. (Dome type only)

zIf images are not displayed, set the Web browser to compatibility view. For details on how to

configure, refer to our website (http://security.panasonic.com/library/v/en/).

zTo register to a Panasonic network recorder, select WV-SW559, the model number required for

the WV-V2530LK, or WV-SW558, the model number required for the WV-V1330LK.

Refer to the Panasonic support website for details.

http://security.panasonic.com/library/v/en/

Trademarks and registered trademarks

zMicrosoft, Windows, Windows Media, Internet Explorer, and ActiveX are either registered

trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

zMicrosoft product screen shot(s) reprinted with permission from Microsoft Corporation.

zAll other trademarks identified herein are the property of their respective owners.

Alarm input connection

Please refer to the following figure for alarm input information.

Alarm input: When the input signal is idle or grounded, the device can collect the different statuses

of the alarm input port. When the input signal is connected to 3.3V or it is idle, the device collects

the logic “1”. When the input signal is grounded, the device collects the logic “0”.

Alarm Input

Camera

GND

Collecting

Alarm output connection

Please refer to the following figure for alarm output information.

When alarm output is open collector, it needs to increase pull-up resistance externally to work

normally; output signal is high and low level. After external pull-up resistance is increased, the

default of output signal is high level, and it switches to low level when there is alarm output.

The working current of alarm output port is recommended as <= 10mA. The max current which is

used to drive external circuit is 80mA, it is advised to add a relay if it is beyond the value.

Camera

Alarm Output

10k

+3.3V

External

Device

GND

OutputInput

Assembling RJ45 waterproof connector

IMPORTANT:

zThe maximum cable length is 100 m.

zMake sure that the PoE device in use is compliant with IEEE802.3af standard.

zUse all 4 pairs (8 pins) of the Ethernet cable.

zThe external dimensions of the Ethernet cable are ø5 mm to ø6.5 mm.

zIf the procedure for the RJ45 waterproof connector (accessory) part is not correctly followed,

the waterproofing may be compromised. Do not install the camera where the RJ45

waterproof connector is exposed to constant rain or moisture.

1 Attach the rubber ring (accessory) to the RJ45

waterproof jack connected to the camera as shown.

zAttach with the flat surface of the rubber ring facing

the RJ45 waterproof jack.

2 First pass the Ethernet cable through the RJ45

waterproof connector cap (accessory), the inner rubber

(accessory) and then RJ45 waterproof connector cover

(accessory).

Next, use a specialized tool (locally procured) to crimp

the RJ45 plug (locally procured) to the end of the

Ethernet cable.

zPass the inner rubber over the cable so that the

grooved surface faces the RJ45 plug and the flat

surface faces the Ethernet cable.

3 Insert the inner rubber into the far end of the waterproof

connector cover (the direction in which multiple tabs

are open) to secure it temporarily inside the multiple

tabs.

The following steps illustrate how to attach the connector

to a camera as it is being installed.

4 Connect the RJ45 plug to the RJ45 waterproof jack

and then rotate and tighten firmly the RJ45 waterproof

connector cover.

5 Connect the RJ45 waterproof connector cap to the

RJ45 waterproof connector cover and rotate the RJ45

waterproof connector cap until there is no gap between

it and the RJ45 waterproof connector cover.

Connect 12 V DC AC adaptor to the power port (if necessary)

When the camera will run on an external power supply, use an AC adaptor that can provide a 12 V

DC 1.5 A or higher power supply.

IMPORTANT:

When cables are used outdoors, there is a chance that they may be affected by lightning.

In this case, install a lightning arrester just before where the cables connect to the camera.

CAUTION:

zA READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE

EQUIPMENT POWERED BY 12 V DC POWER SUPPLY.

zONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL1310/CSA 223) or LIMITED

POWER SOURCE (IEC/EN/UL/CSA 60950-1).

INITIAL SET button

When you need to reset the camera, press and hold the “INITIAL SET button” for about 10 seconds

while the power is connected. The button is shown in the illustration for Step 3 of the instructions for

WV-V2530LK and described in the “NOTE:” section below Step 5 of the instructions for WV-V1330LK.

RJ45

waterproof jack

Rubber ring

Flat surface

RJ45 plug

(locally

procured)

RJ45

waterproof

connector

cover

(accessory)

RJ45

waterproof

connector

cap

(accessory)

Ethernet

cable

(locally

procured)

Flat surface

Inner rubber

(accessory)

Multiple tabs

RJ45 waterproof

jack

Specyfikacje produktu

Marka:	Panasonic
Kategoria:	kamera bezpieczeństwa
Model:	WV-V1330LK
Kolor produktu:	Biały
Rodzaj zasilania:	PoE
Wysokość produktu:	71 mm
Szerokość produktu:	76 mm
Waga produktu:	380 g
Technologia łączności:	Przewodowa
Liczba kamer:	1
Formaty kompresji:	H.264, H.265, M-JPEG
Przeznaczenie:	Zewnętrzna
Ilość portów Ethernet LAN (RJ-45):	1
Obsługa PoE:	Tak
Zakres temperatur (eksploatacja):	-30 - 60 °C
Zakres wilgotności względnej:	10 - 90 %
Układ:	Pocisk
Tryb nocny:	Tak
Wi-Fi:	Nie
Przewodowa sieć LAN:	Tak
Zintegrowany czytnik kart:	Tak
Model:	Kamera bezpieczeństwa IP
Technologia okablowania:	10/100Base-T(X)
Maks. rozdzielczość:	1920 x 1080 px
Stopień ochrony IP:	IP66
Typ mocowania:	Ściana
Zużycie energii:	100 mA
Obsługiwane protokoły sieciowe:	IPv4/ IPv6, HTTP, HTTPS, SSL, TCP/ IP, UDP, UPnP, ICMP, IGMP, SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, DDNS, FTP, QoS, 802.1x
Długość ogniskowa:	3.6 - 3.6 mm
Obsługiwane rozdzielczości grafiki:	320 x 240,640 x 360,640 x 480 (VGA),1280 x 720 (HD 720),1280 x 960,1920 x 1080 (HD 1080)
Obsługiwane tryby wideo:	720p, 1080p
Redukcja hałasu:	Tak
Typ przetwornika obrazu:	CMOS
Balans bieli:	Auto, Lamp, Manual, Outdoor
Typ diody LED:	Podczerwień
Min. Oświetlenie:	0.2 lx
Pełny HD:	Tak
Długość produktu:	165 mm
Wbudowany HDD:	Nie
Wyjście prądu stałego (w amperach):	1 A
Kąt widzenia obiektywu, w poziomie:	87 °
Kąt widzenia obiektywu w pionie:	48 °
Wielkość czujnika CCD:	1/2.8 "
Video detektor ruchu:	Tak
Ilość klatek:	60 fps
Szybkość migawki:	1/3 s
Wide Dynamic Range (WDR):	Tak
Liczba użytkowników:	20 użyt.
Wyjście prądu stałego (w woltach):	12
Odległość widzenia nocnego (Night Vision):	30 m
Cechy zabiezpieczeń:	Dust resistant, Water resistant
Maska prywatności:	Tak
Automatyczna regulacja wzmocnienia (ARW):	Tak
Zużycie prądu (przesył prądu przez Ethernet (PoE)):	4.8 W