Instrukcja obsługi Panasonic KX-HN6031

Panasonic kamera bezpieczeństwa KX-HN6031

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panasonic KX-HN6031 (3 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

Installation Guide

Home Network System

Smart Plug

Model No. KX-HNA101E

Thank you for purchasing a Panasonic product.

This document explains how to install the smart plug properly.

For details about how to use the system, refer to the User’s Guide

(page 12).

Please read this document before using the unit and save it for future

reference.

For dedicated help, support, or advice, available to help you Monday -

Friday, 09:00 - 23:00. For U.K., please contact us on 0330 3331112 and

for Ireland 01 4475228.

HNA101E_(en_en)_1228_ver.204.pdf 1 2016/12/28 11:27:15

About this system

RThis system is an auxiliary system; it

is not designed to provide complete

protection from property loss.

Panasonic will not be held

responsible in the event that

property loss occurs while this

system is in operation.

RThe system’s wireless features are

subject to interference, therefore

functionality in all situations cannot

be guaranteed. Panasonic will not

be held responsible for injury or

damage to property that occurs in

the event of wireless communication

error or failure.

For your safety

To prevent severe injury and loss of life/

property, read this section carefully

before using the product to ensure

proper and safe operation of your

product.

WARNING

Power connection

RUse only the power source marked

on the product.

RDo not overload power outlets. This

can result in the risk of fire or electric

shock.

RCompletely insert the product into

the power outlet. Failure to do so

may cause electric shock and/or

excessive heat resulting in a fire.

RRegularly remove any dust, etc.

from the product by pulling it from

the power outlet, then wiping with a

dry cloth. Accumulated dust may

cause an insulation defect from

moisture, etc. resulting in a fire.

RUnplug the product from power

outlets if it emits smoke, an

abnormal smell, or makes an

unusual noise. These conditions can

cause fire or electric shock. Confirm

that smoke has stopped emitting

and contact an authorised service

centre.

RUnplug from power outlets and

never touch the inside of the product

if its casing has been broken open.

Danger of electric shock exists.

RNever touch the plug with wet

hands. Danger of electric shock

exists.

RDo not connect non-specified

devices.

RBefore connecting an electric device

to this product, make sure the

electric device meets the

specifications described on

page 13. Using unspecified

devices may cause fire or smoke.

Installation

RInstall this product in accordance

with the provided instructions.

RTo prevent the risk of fire or

electrical shock, do not expose the

product to rain or any type of

moisture.

RDo not place or use this product

near automatically controlled

devices such as automatic doors

and fire alarms. Radio waves

emitted from this product may cause

such devices to malfunction

resulting in an accident.

RPanasonic will not be held

responsible for damage or injury

caused by improper connection,

installation, or usage.

Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228 5

Important Information

HNA101E_(en_en)_1228_ver.204.pdf 5 2016/12/28 11:27:16

Part names and

functions

Power plug

MM N

Used when registering the smart

plug to the hub.

Power outlet

MM N

NN (on/off)

LED indicator

Turns the connected device on

and off. Also serves as the LED

indicator.

LED indicator

You can use the LED indicator to

confirm the smart plug’s status.

Indicator Status

Off No power, smart

plug is off, or LED

indicator is turned

off*1

Green, lit Smart plug is on*1

Indicator Status

Green,

blinking slowly

Registration mode

Red, blinking Smart plug is out of

range of the hub

Red, blinking

very quickly

Connected electric

device is drawing

too much current or

wattage*2

*1 You can configure the smart plug

so that its LED indicator does not

light during normal operation. For

more information, refer to the

User’s Guide (page 12).

*2 In this case, the smart plug will

turn off automatically. To turn the

smart plug on again, disconnect it

from the power outlet, disconnect

the connected electric device, and

then connect the smart plug to the

power outlet.

Setup overview

1Initial setup

Make sure you can access the

system using your mobile device.

For details, refer to the System

Setup Guide included with your

hub.

2Connection

Connect the smart plug to the

power outlet and connect the

desired electric device to the smart

plug.

3Registration

Required only if the smart plug

was purchased separately (i.e.,

not as part of a bundle).

Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228 9

Setup

HNA101E_(en_en)_1228_ver.204.pdf 9 2016/12/28 11:27:16

Specyfikacje produktu

Marka:	Panasonic
Kategoria:	kamera bezpieczeństwa
Model:	KX-HN6031

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panasonic KX-HN6031, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje kamera bezpieczeństwa Panasonic

Panasonic AW-UE100K Instrukcja

31 Sierpnia 2024

Panasonic AW-UR100 Instrukcja

30 Sierpnia 2024

Panasonic KX-HN6031 Instrukcja

30 Sierpnia 2024

Panasonic KX-HN6002W Instrukcja

7 Czerwca 2024

Panasonic WV-SFR531 Instrukcja

7 Czerwca 2024

Panasonic WV-S3532LM Instrukcja

7 Czerwca 2024

Panasonic WV-S6131 Instrukcja

7 Czerwca 2024

Panasonic WV-V1330LK Instrukcja

7 Czerwca 2024

Panasonic WV-V1170 Instrukcja

7 Czerwca 2024

Panasonic WV-CW244S Instrukcja

7 Czerwca 2024

Instrukcje kamera bezpieczeństwa

Najnowsze instrukcje dla kamera bezpieczeństwa

TRENDnet TV-IP602WN Instrukcja

5 Października 2024

Home Protector 72268 Instrukcja

5 Października 2024

TRENDnet TV-IP302PI Instrukcja

5 Października 2024

Abus IPCB42510B Instrukcja

28 Września 2024

Vivotek FE8171V Supreme Instrukcja

28 Września 2024

Vivotek MD7530 Dome Instrukcja

28 Września 2024

Vivotek IP8362 Supreme Instrukcja

28 Września 2024

Vivotek NR8401 NVR Instrukcja

28 Września 2024

Vivotek ST2403 Software Instrukcja

28 Września 2024

Vivotek PZ8111W PTZ Instrukcja

28 Września 2024