Instrukcja obsługi Panasonic Wings

Panasonic Słuchawki Wings

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panasonic Wings (12 stron) w kategorii Słuchawki. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
SQW0592
Owner’s Manual
Digital Wireless Stereo Earphones
Model No. RP-BTS30
PP
If you have any questions, visit:
In the U.S.A.:
www.panasonic.com/support
In Canada:
www.panasonic.ca/english/support
Pour toute question, visitez :
www.panasonic.ca/french/support
For U.S.A. only /
Pour les É.-U. seulement
The warranty can be found on “Basic Owner’s
Manual”.
Register online at
www.panasonic.com/register
(U.S. customers only)
For Canada only / Pour le Canada seulement
The warranty can be found on “Basic Owner’s
Manual”.
La garantie se trouve dans le
« Manuel d’utilisation Fonctions de base ».
2
Please check and identify the supplied
accessories.
Only for U.S.A.:
To order accessories, refer to
“Limited Warranty” on “Basic
Owner’s Manual”.
Only for Canada:
To order accessories, contact the
dealer from whom you have made
your purchase.
1 USB charging cord
1 Carrying pouch
1 Earpieces set (L, S)
Table of
contents
Before use
Dear customer
Thank you for purchasing this product.
Please read these instructions carefully
before using this product, and save this
manual for future use.
Accessories
(Important) About water resistance
• Specifications for this unit are equivalent of IPX4 of IEC 60529.
■About the IPX4 (liquid ingress protection level against splashing
water)
This unit is compatible to operate after splashing from nozzles approximately
1.8 L/min (0.5 gallon/min) of room temperature tap water from every direction
approximately 20 cm (8 inches) from this unit for 10 minutes. Supplied USB
charging cord is not water resistant.
Water resistance is not guaranteed under all conditions.
■Cautions for using around water
Conform to following. Improper use may result in a malfunction.
• Securely close the USB lid.
• Do not open or close the USB lid with wet hands or when water droplets are
on this unit. Doing so may cause malfunction such as terminal rusting with the
water droplets.
• Do not connect and use a USB charging cord.
• Do not pour soap water or detergent, or immerse in water.
• Remove any hair, lint, sand, dust, etc., that may be attached to the rubber seal
on the USB lid before closing.
• Leaving the device with water droplets in a cold region may result to
malfunction such as the USB lid stuck closed.
• The sound may become smaller or distorted when water is accumulated in the
earphones or microphone of this unit. Wipe this unit with dry soft cloth.
• When water enters inside this unit, stop using this unit, and contact the nearest
Dealer or Service Center. Malfunction due to exposure to water by improper
handling by the customer will not be covered by the warranty. Supplied USB
charging cord is not water resistant.
Accessories 2 ........................................
(Important) About water resistance..... 2
Part names 3 .........................................
Charging 3 .............................................
Turning the power on/off 3 .....................
Connecting a Bluetooth® device 4 .........
How to wear the earphones................ 4
Listening to music 5 ...............................
Making a phone call............................ 5
Useful functions 6 ..................................
Restoring to the factory settings 6 .........
Maintenance 7 .......................................
Copyright, etc. 7 ....................................
About Bluetooth® ................................ 7
Safety precautions 8 ..............................
Troubleshooting guide 9 ........................
Specifications 10 ...................................
Useful information............................. 10
To remove the battery when
disposing of this unit ..................... 11
Preparation
Operation
Other
3
8
9
10
11
12
13
2
65
1
2
3
4
7
The product illustrations may differ from
the actual product.
Part names
1Right earphone
2
USB lid
3Earpiece
4Left earphone
5Cord adjuster
6Clip
7Remote controller
8LED indicator light*
• The number of blinks or color
notifies the status of the unit.
(* hereafter referred to as “LED”)
9Charging terminal (DC IN)
• Open the USB lid and connect
the USB charging cord
(supplied) to this terminal when
charging. (See “Charging”)
10
Microphone
11
Volume +/Next
12
Power/Pairing/Play/Pause/
Call
13
Volume –/Previous
■Note
• Excessive sound pressure from
earphones and headphones can
cause hearing loss.
• Listening at full volume for long
periods may damage the user’s
ears.
• Do not use any other USB
charging cords except the
supplied one.
• When using the unit, do not cover
the right housing with the palm
of your hand. The Bluetooth
®
connection may be blocked.
Remote controller
The rechargeable battery (installed in the unit) is not charged initially. Charge
the battery before using the unit.
1Connect this unit to a computer
using the USB charging cord
• Within approximately 3 seconds after
the connection is established, the LED
on the right earphone will light in red.
• The LED lights in red when charging
is in progress. When charging is
completed, the LED will go out.
•
Charging will take approximately
1.5 hours from empty state to fully
charged. (Quick charging time for
70 minutes operation: Approx. 15 minutes)
Right earphone
Computer
LED
USB charging cord (supplied)
■Note
• The Bluetooth® feature cannot be used when this unit is connected to a computer
using the USB charging cord.
• Charge in a room temperature between 10 °C and 35 °C (50 ºF and 95 ºF).
Outside of this range of temperatures, charging may stop.
• The power cannot be turned on while charging.
• If PC used for charging enters “sleep mode”, charging may not take place.
• Do not use any other USB charging cords except the supplied one.
Caution: Use only the supplied USB charging cord when connecting to a
computer.
Charging
1Press and hold for approximately
3 seconds
• A beep will sound and the LED on the right
earphone will blink.
Power
LED
To turn the power off
• Press and hold for approximately 3 seconds.
A beep will sound and the power will be turned off.
■Note
• When the unit is not operated for approximately 5 minutes, the power will
automatically turn off. (See “Auto power off” (→ P. 6))
Turning the power on/off
Right earphone

Specyfikacje produktu

Marka: Panasonic
Kategoria: Słuchawki
Model: Wings

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panasonic Wings, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Słuchawki Panasonic

Panasonic

Panasonic Wings Instrukcja

1 Października 2024
Panasonic

Panasonic RP-BTS10E Instrukcja

28 Sierpnia 2024
Panasonic

Panasonic RP-BTS30E Instrukcja

21 Sierpnia 2024
Panasonic

Panasonic RP-HD605N Instrukcja

8 Sierpnia 2024

Instrukcje Słuchawki

Najnowsze instrukcje dla Słuchawki

Klipsch

Klipsch R6i Instrukcja

15 Października 2024
Vakoss

Vakoss MH954 Instrukcja

14 Października 2024
Skullcandy

Skullcandy Cassette Instrukcja

14 Października 2024
Jabra

Jabra Wave Corded Instrukcja

14 Października 2024
Manta

Manta MM65 Instrukcja

14 Października 2024
AKG

AKG Y600NC Instrukcja

14 Października 2024
Audio-Technica

Audio-Technica ATH-ANC29 Instrukcja

13 Października 2024
Daewoo

Daewoo AVS1421 Instrukcja

13 Października 2024
Vakoss

Vakoss MH942 Instrukcja

13 Października 2024
SuperTooth

SuperTooth Freedom Instrukcja

13 Października 2024