Instrukcja obsługi Panasonic RP-BTS30E

Panasonic Hoofdtelefoon RP-BTS30E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panasonic RP-BTS30E (12 stron) w kategorii Hoofdtelefoon. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
SQW0596
Operating Instructions
Digital Wireless Stereo Earphones
Model No. RP-BTS30
E
EU
Manufactured by:
Panasonic Corporation
Kadoma, Osaka, Japan
Importer for Europe:
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 11, 22525 Hamburg, Germany
2
Please check and identify the supplied
accessories.
1 USB charging cord
1 Carrying pouch
1 Earpieces set (L, S)
For the United Kingdom and Ireland
customers
Sales and Support Information
Customer Communications Centre
• For customers within the U.K.:
0344 844 3899
• For customers within Ireland:
01289 8333
• Monday - Friday 9:00am - 5:00pm
(Excluding public holidays).
• For further support on your product,
please visit our website:
www.panasonic.co.uk
Direct Sales at Panasonic U.K.
• Order accessory and consumable
items for your product with ease and
confidence by phoning our Customer
Communications Centre -
Monday - Friday 9:00am - 5:00pm
(Excluding public holidays).
• Or go on line through our Internet
Accessory ordering application at
www.pas-europe.com
• Most major credit and debit cards
accepted.
• All enquiries transactions and
distribution facilities are provided
directly by Panasonic U.K.
• It couldn’t be simpler!
• Also available through our Internet is
direct shopping for a wide range of
finished products. Take a browse on
our website for further details.
Table of
contents
Before use
Accessories
(Important) About water resistance
• Specifications for this unit are equivalent of IPX4 of IEC 60529.
■About the IPX4 (liquid ingress protection level against splashing
water)
This unit is compatible to operate after splashing from nozzles approximately
1.8 L/min of room temperature tap water from every direction approximately
20 cm from this unit for 10 minutes. Supplied USB charging cord is not water
resistant.
Water resistance is not guaranteed under all conditions.
■Cautions for using around water
Conform to following. Improper use may result in a malfunction.
• Securely close the USB lid.
• Do not open or close the USB lid with wet hands or when water droplets are
on this unit. Doing so may cause malfunction such as terminal rusting with the
water droplets.
• Do not connect and use a USB charging cord.
• Do not pour soap water or detergent, or immerse in water.
• Remove any hair, lint, sand, dust, etc., that may be attached to the rubber seal
on the USB lid before closing.
• Leaving the device with water droplets in a cold region may result to
malfunction such as the USB lid stuck closed.
• The sound may become smaller or distorted when water is accumulated in the
earphones or microphone of this unit. Wipe this unit with dry soft cloth.
• When water enters inside this unit, stop using this unit, and contact the nearest
Dealer or Service Centre. Malfunction due to exposure to water by improper
handling by the customer will not be covered by the warranty. Supplied USB
charging cord is not water resistant.
Accessories 2 ........................................
(Important) About water resistance..... 2
Part names 3 .........................................
Charging 3 .............................................
Turning the power on/off 3 .....................
Connecting a Bluetooth® device 4 .........
How to wear the earphones................ 4
Listening to music 5 ...............................
Making a phone call............................ 5
Useful functions 6 ..................................
Restoring to the factory settings 7 .........
Copyright, etc. 7 ....................................
Maintenance 7 .......................................
Safety precautions 8 ..............................
About Bluetooth® ................................ 9
Specifications 9 .....................................
Troubleshooting guide 10 ......................
To remove the battery when
disposing of this unit ..................... 11
Preparation
Operation
Other
Dear customer
Thank you for purchasing this product.
Please read these instructions carefully
before using this product, and save this
manual for future use.
3
8
9
10
11
12
13
2
65
1
2
3
4
7
Part names Charging
The product illustrations may differ from
the actual product.
1Right earphone
2
USB lid
3Earpiece
4Left earphone
5Cord adjuster
6Clip
7Remote controller
8LED indicator light*
• The number of blinks or colour
notifies the status of the unit.
(* hereafter referred to as “LED”)
9Charging terminal (DC IN)
• Open the USB lid and connect
the USB charging cord
(supplied) to this terminal when
charging. (See “Charging”)
10
Microphone
11
Volume +/Next
12
Power/Pairing/Play/Pause/
Call
13
Volume –/Previous
■Note
• Do not use any other USB
charging cords except the
supplied one.
• When using the unit, do not cover
the right housing with the palm
of your hand. The Bluetooth
®
connection may be blocked.
The rechargeable battery (installed in the unit) is not charged initially. Charge
the battery before using the unit.
1Connect this unit to a computer
using the USB charging cord
• Within approximately 3 seconds after
the connection is established, the LED
on the right earphone will light in red.
• The LED lights in red when charging
is in progress. When charging is
completed, the LED will go out.
• Charging will take approximately
1.5 hours from empty state to fully
charged. (Quick charging time
for 70 minutes operation: Approx.
15 minutes)
Right earphone
Computer
LED
USB charging cord (supplied)
■Note
• The Bluetooth® feature cannot be used when this unit is connected to a computer
using the USB charging cord.
• Charge in a room temperature between 10 °C and 35 °C. Outside of this range
of temperatures, charging may stop.
• The power cannot be turned on while charging.
• Do not use any other USB charging cords except the supplied one.
Caution: Use only the supplied USB charging cord when connecting to a
computer.
1Press and hold for approximately
3 seconds
• A beep will sound and the LED on the right
earphone will blink.
Power
LED
To turn the power off
• Press and hold for approximately 3 seconds.
A beep will sound and the power will be turned off.
■Note
• When the unit is not operated for approximately 5 minutes, the power will
automatically turn off. (See “Auto power off” (→ P. 6))
Turning the power on/off
Remote controller
Right earphone

Specyfikacje produktu

Marka: Panasonic
Kategoria: Hoofdtelefoon
Model: RP-BTS30E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panasonic RP-BTS30E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Hoofdtelefoon Panasonic

Panasonic

Panasonic Wings Instrukcja

1 Października 2024
Panasonic

Panasonic RP-BTS10E Instrukcja

28 Sierpnia 2024
Panasonic

Panasonic RP-BTS30E Instrukcja

21 Sierpnia 2024
Panasonic

Panasonic RP-HD605N Instrukcja

8 Sierpnia 2024

Instrukcje Hoofdtelefoon

Najnowsze instrukcje dla Hoofdtelefoon

Thomson

Thomson WHP-6017 Instrukcja

1 Października 2024
T'nB

T'nB Onyx Instrukcja

1 Października 2024
Vivanco

Vivanco Smart Air 3 Instrukcja

1 Października 2024
Vivanco

Vivanco Traveller Air 4 Instrukcja

1 Października 2024
Vivanco

Vivanco Sport Pair Instrukcja

1 Października 2024
Defunc

Defunc ENTERTAINMENT Instrukcja

1 Października 2024
Thomson

Thomson EAR5105 Instrukcja

1 Października 2024
Philips

Philips Fidelio L2BO Instrukcja

30 Września 2024
Philips

Philips Fidelio S2WT Instrukcja

30 Września 2024
Sunstech

Sunstech HPSBT230 Instrukcja

30 Września 2024