Instrukcja obsługi Panasonic SC-HDX3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panasonic SC-HDX3 (8 stron) w kategorii Hifi systeem. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
RQT5579-B
Note:
EB on the packaging indicates the United
Kingdom.
Before connecting, operating or adjusting this
product, please read these instructions completely.
Please keep this manual for future reference.
EB
Amplifier/Speaker System
Operating Instructions
Model No. SC-HDX3
2
Dear Customer
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
Safety precautions .......................................................................... 2
Caution for AC Mains Lead ..............................................................3
Speaker set-up ................................................................................ 4
Connection ...................................................................................... 5
Operation ........................................................................................ 6
Maintenance .................................................................................... 6
Troubleshooting guide .................................................................... 7
Specifications .................................................................................. 7
Table of contents
Supplied accessories
Please check and identify the supplied
accessories.
Use numbers indicated in parentheses when asking for
replacement parts.
SE-HDX3
AC mains lead
(RJA0053-2X) ............................1
SB-HDX3
Speaker cables
(Long, for surround speakers)
(REE0499A) ..............................2
Speaker cable
(Short, for center speaker)
(REE1057) ................................1
Speaker feet
(RFA0631A-K) ..................12 feet
Replacements sold in 1-sheet lots (4 feet per sheet).
Flat cable
(REX1048) ................................1
Stereo phono cable
(RJL2P004B08A) ......................1
Monaural phono cable
(RJL1P021B08) ........................1
Metal wall mounts
(RMQ0987) ..............................6
Screws
(XTB3+16AFZ) ........................12
3 channel amplifier
Speakers
SE-HDX3
SB-HDX3 ×3
Placement
Set the system up on an even surface away from direct sunlight,
high temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces to avoid distortion
and unwanted acoustical effects.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock.
Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is
not covered in these instructions occurs, disconnect the AC mains
lead and contact your dealer or an authorized service center.
Electric shock or damage to the unit can occur if the unit is repaired,
disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. ENSURE THAT
CURTAINS AND ANY OTHER MATERIALS DO NOT
OBSTRUCT THE VENTILATION TO PREVENT RISK OF
ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING.
Safety precautions
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE
TO RAIN, SPLASHING, DRIPPING OR MOISTURE.
3
(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for
your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is approved
by ASTA or BSI to BS 1362.
Check for the ASTA mark or the BSI mark on the body of
the fuse.
If the plug contains a removable fuse cover you must ensure that it
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE
SOCKET OUTLET IN YOUR HOME THEN THE FUSE
SHOULD BE REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF
THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE
SOCKET.
If a new plug is to be fitted please observe the wiring code as stated
below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH
TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE
EARTH SYMBOL OR COLOURED GREEN OR
GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF-KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and follow
the instructions below. Illustrations may differ from actual AC mains
plug.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B Fuse cover
2. Replace the fuse and close or attach the fuse cover.
Figure A
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
Caution for AC Mains Lead

Specyfikacje produktu

Marka: Panasonic
Kategoria: Hifi systeem
Model: SC-HDX3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panasonic SC-HDX3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Hifi systeem Panasonic

Instrukcje Hifi systeem

Najnowsze instrukcje dla Hifi systeem

MXL

MXL Mic Mate Pro Instrukcja

28 Września 2024
Starkey

Starkey SoundGear Instrukcja

27 Września 2024
Vivax

Vivax BS-801 Instrukcja

26 Września 2024
Pyle

Pyle PBT97 Instrukcja

25 Września 2024
ART

ART HQ-231 Instrukcja

25 Września 2024
E-bench

E-bench KH 350 Instrukcja

23 Września 2024
Kiloview

Kiloview KV-P1 Instrukcja

22 Września 2024
Motu

Motu Monitor 8 Instrukcja

22 Września 2024