Instrukcja obsługi Ozito RTB-003

Ozito Maszyna do piłowania RTB-003

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito RTB-003 (9 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/9
ROUTER
TABLE
855 x 335MM
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 220-240V~ 50Hz
Main Table: 455 x 335mm
Table with Extensions: 855 x 335mm
Router Max. Power: 1800W
Router Bit Max.: 22mmØ
Router Max. Weight: 3.5kg
Table Inserts: 13mm (1/2”)Ø
Ø19mm (3/4”)
Ø25mm (1”)
Ø32mm (1-1/4”)
Ø38mm (1-1/2”)
Weight: 7.0kg
RTB-003
WHAT’S IN THE BOX
Router Table
Switch Box, Feather
Boards x 3
Table Inserts x 5
Mitre Gauge & Table
Extensions
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0617
Bolts, Knobs, Nuts &
Washers
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Fence
2. Table Extension
3. Mitre Gauge
4. Feather Board
5. Switch Box Outlet
6. On/Off Switch
7. Guard
8. Dust Port
9. Leg
10. Table
ROUTER TABLE
KNOW YOUR PRODUCT
1. ASSEMBLY
Attaching the legs and table extensions.
3. Place table leg as
shown. Loosely x
in position using four
screws and ange lock
nuts, do not fully tighten
yet.
6. Repeat steps 2 to 5 for the other table extension and table legs.
Once all four legs are securely tightened, turn assembly over
and check the router table does not rock.
SETUP & PREPARATION
The router table must be fully assembled before use.
2. With the table and
one table extension
upside down on a at
surface, align the table
extensions as shown.
Once aligned, slide
the table and table
extension together.
NOTE: The table leg ts inside
the table prole, with xing
screws inserted from the outside.
1. Use 16, 18mm Phillips head
assembly fasteners as
shown.
4. Repeat step 3 above for opposite table leg.
5. Once both table legs are loosely tted, ensure the table and
table extension are lying perfectly at, gently tighten all screws,
working from the centre to the outside.
Insert router mounting bolts
1. Use 4, 50mm Coach bolts, router clamps and assembly
fasteners as shown.
2. Insert four 50mm
coach bolts into the
holes as shown from
the top of the table.
3. From the underside,
loosely t bracket,
washer and ange nut
as shown. Do this for
all four bolts.
ACCESSORIES
11. Table Inserts x 5
2. With the router table on its
legs, align the 2 screw holes
in the switch box with the
corresponding holes in the
table.
Attaching Fence
Attaching Fence Feather Boards
1. Use 2, 40mm Hex head bolts, washer and locking knob
assembly fasteners as shown.
2. Insert the bolts from the
underside of the table
through the holes marked.
3. Place the fence on the bolts and secure in position with washer
and locking knob.
1. Use 4, 40mm Coach bolts, washer and wing nut assembly
fasteners as shown.
2. Fit the fence feather boards to the front of the fence as shown.
NOTE: Pay attention to
the feed direction.
Attaching Table Feather Board
1. Use 2, 30mm Hex head bolts, washer, locking knobs and spacer
assembly fasteners as shown.
2. Insert the two hex head bolts
from the underside of the
table, place spacers on the
bolts ensuring the correct
orientation.
3. Place the feather board on
top, place washer on each
bolt and secure with locking
knobs.
Attaching Switch Box.
1. Use 2, 18mm Phillips head
assembly fasteners as
shown.
x
3. Using screws from the front of
the table secured with ange
lock nuts.

Specyfikacje produktu

Marka: Ozito
Kategoria: Maszyna do piłowania
Model: RTB-003

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito RTB-003, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Ozito

Ozito

Ozito PXBCS-1830 Instrukcja

24 Grudnia 2024
Ozito

Ozito PXCCSK-4182 Instrukcja

8 Października 2024
Ozito

Ozito PXBPCK-1825 Instrukcja

8 Października 2024
Ozito

Ozito PXTCSK-2520 Instrukcja

8 Października 2024
Ozito

Ozito PXPRSS-018 Instrukcja

7 Października 2024
Ozito

Ozito PXBPCS-1815 Instrukcja

7 Października 2024
Ozito

Ozito JSW-6100U Instrukcja

22 Września 2024
Ozito

Ozito OCS-018 Instrukcja

20 Września 2024
Ozito

Ozito RSW-5200 Instrukcja

18 Września 2024
Ozito

Ozito JSW-4000U Instrukcja

18 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Alpina

Alpina APR 26 Instrukcja

22 Marca 2025
Gamma

Gamma HCZ2-85 Instrukcja

11 Marca 2025
Baumr-AG

Baumr-AG SW1 Instrukcja

10 Marca 2025
Stiga

Stiga PR 100e Instrukcja

9 Marca 2025
Bosch

Bosch EasyChain 18V-15-7 Instrukcja

27 Lutego 2025
Worx

Worx Nitro WX501 Instrukcja

26 Lutego 2025
DeWalt

DeWalt DCS383 Instrukcja

12 Lutego 2025
EGO

EGO PSX2510 Instrukcja

6 Lutego 2025
Hilti

Hilti WSR 1400-PE Instrukcja

4 Lutego 2025
Husqvarna

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025