Instrukcja obsługi Ozito PXRSK-250

Ozito Maszyna do piłowania PXRSK-250

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXRSK-250 (10 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/10
SPECIFICATIONS
Voltage: 18V
No Load Speed: 0-2600spm
Stroke Length: 22mm
Blade Fitment: Tool-free
Cutting Capacities: Timber 100mm
Non Alloy Steel 6mm
Weight: 1.5kg
CORDLESS
RECIPROCATING
SAW
INSTRUCTION MANUAL
ozito.com.au
PXRSS-400
WHAT’S IN THE BOX
Reciprocating Saw
Timber Cutting Blade
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
1118
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts, for example: cutting blades, etc.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
1. ASSEMBLY
KNOW YOUR PRODUCT SETUP & PREPARATION
CORDLESS RECIPROCATING SAW
1 2 3 4 5 6 7
1 Timber Cutting Blade
2 Pivoting Shoe (Adjustable)
3 Blade Holder
4 Shoe Locking Button
5 Variable Speed Trigger
6 Sure Grip Handle
7 Lock-Off Button
1 Rotate and hold the blade holder
anti-clockwise.
1 Rotate and hold the blade holder
anti-clockwise.
3 Ensure the blade is secure by pulling on the blade.
1 Push the shoe locking button in
from the left side of the saw to
unlock the shoe.
3 Secure in place by pressing the
shoe locking button in from the
right side of the saw.
2 Remove the blade and release
the blade holder.
2 Insert the blade and release the
blade holder.
2 Push the shoe in or out into the
desired position.
Removing a Cutting Blade
Fitting a Cutting Blade
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
THE BATTERY IS REMOVED BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
Adjusting the Pivot Shoe
3. CONTROLS2. FITTING THE BATTERY
OPERATION
Inserting & Removing the Battery
1 Align the ribs of the battery with
the recess at the base of the
saws rear handle and push in
until it clicks into place.
2 Squeeze the on/off trigger to
start operating.
2 To remove, press and
hold the battery release
tab and then slide out.
1 Press and hold the lock-off
button.
3 To stop the saw, release the on/
off trigger.
Battery protection system
The tool is equipped with the battery protection system, which helps to ensure a long service
life.
The output power automatically cuts off during operation when the tool and/or battery are
placed under the following situations:
• When the tool is overloaded:
If this occurs, release the trigger switch and remove causes of overload, then pull the
switch trigger again to restart.
• When the remaining battery capacity becomes low:
Recharge the battery pack.
Note: The battery protection system does not in any way damage the tool.
Note: The indicated capacity may be lower than the actual level during use or immediately
after using the tool.
Note: The lock-off button can be released once operating
Turning On and Off

Specyfikacje produktu

Marka: Ozito
Kategoria: Maszyna do piłowania
Model: PXRSK-250

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXRSK-250, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Ozito

Ozito

Ozito PXBCS-1830 Instrukcja

24 Grudnia 2024
Ozito

Ozito PXCCSK-4182 Instrukcja

8 Października 2024
Ozito

Ozito PXBPCK-1825 Instrukcja

8 Października 2024
Ozito

Ozito PXTCSK-2520 Instrukcja

8 Października 2024
Ozito

Ozito PXPRSS-018 Instrukcja

7 Października 2024
Ozito

Ozito PXBPCS-1815 Instrukcja

7 Października 2024
Ozito

Ozito JSW-6100U Instrukcja

22 Września 2024
Ozito

Ozito OCS-018 Instrukcja

20 Września 2024
Ozito

Ozito RSW-5200 Instrukcja

18 Września 2024
Ozito

Ozito JSW-4000U Instrukcja

18 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Husqvarna

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025
Güde

Güde GSS 400 Instrukcja

12 Stycznia 2025
Makita

Makita DUC306PG2 Instrukcja

12 Stycznia 2025
HiKOKI

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025
DEDRA

DEDRA DED7060 Instrukcja

11 Stycznia 2025
Einhell

Einhell KGS 190 Instrukcja

11 Stycznia 2025
Sun Joe

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025
Einhell

Einhell BT-MB 550 U Instrukcja

11 Stycznia 2025
Maruyama

Maruyama MCV51 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc JS505DC Instrukcja

9 Stycznia 2025