Instrukcja obsługi Ozito PXPPK-2520

Ozito nożyce do żywopłotu PXPPK-2520

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXPPK-2520 (12 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
CORDLESS
POLE PRUNER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Bar Length: 200mm
Chain Speed: 5.5m/s
Oil Tank: 70ml
Chain Pitch: 9.53mm (3/8”)
Extension Pole: 830mm
Length Min/Max.: 2.07/2.90m
Weight: 3.0kg
PXPPS-1820
STANDARD EQUIPMENT
Pruner Head
ozito.com.au
Extension Tube
WARRANTY
0323
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: bearings, bar,
chain, blade cover.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria 3175, Australia.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
Bar & Chain
Rear Handle Tube
Shoulder Strap, Bar &
Chain Cover
Multi-Tool
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
WARNING! ENSURE THE MACHINE IS SWITCHED OFF
AND BATTERY IS DISCONNECTED BEFORE PERFORMING
ANY OF THE FOLLOWING TASKS.
ACCESSORIES
1
13
2
3
4
15
6
7
8
1. Chain
2. Guide Bar
3. Pruner Head
4. Lock Nut
5. Extension Tube
6. Top Handle
7. Shoulder Strap Retainer
8. Sure Grip Handle
9. Oil Tank Cap
10. Chain Sprocket Cover
11. Cover Bolt
12. Safety Switch
13. Battery Seating
14. On/Off Trigger
15. Chain & Bar Cover
16. Shoulder Strap
17. Multi-Tool
CORDLESS POLE PRUNER
WARNING! THE CHAIN HAS SHARP EDGES, FOR YOUR
OWN SAFETY, PLEASE USE WORK GLOVES. NEVER
TOUCH THE CHAIN OR SERVICE THE UNIT WITH
BATTERY CFITTED.
BATTERY & CHARGER
This tool is compatible with all battery and
chargers from the Ozito PXC Range.
4
14
12
1716
5
7
Fitting the Guide Bar & Chain
1. Loosen the cover bolt with the supplied Multi-Tool and remove chain
sprocket cover together with the cover bolt.
9 1110
Cutter
2. Place the chain in the groove of the guide bar as shown. Refer to the
image printed on the guide bar that indicates the direction that the
chain should face.
WARNING! IF THE CHAIN IS INSTALLED BACKWARDS
(CHAIN CUTTERS FACING IN THE OPPOSITE DIRECTION
OF ROTATION) THE POLE PRUNER WILL VIBRATE
EXCESSIVELY AND NOT CUT.
3. Place the guide bar and
chain in position, ensuring
that the chain is around
sprocket (A). Also ensure
that the pin (B) ts into the
central slot in the guide bar.
4. Pull the guide bar forward
until the chain is closely
seated. Make sure that all
the drive links are in the
groove of the bar.
5. Reattach the chain sprocket
cover and nger-tighten
the cover bolt. Only tighten
the cover bolt securely
once the chain tension
has been adjusted. (see
Tensioning the Chain).
AB
33
The pole hedge trimmer can be used either with or without the
extension tube.
Fitting the Tubes
• Assembly without Extension Tube
1. Make sure the motor head and the rear handle are in the correct
orientation. Push the tube of the motor head into the tube of the rear
handle, aligning the Tab with the Recess as you do so. Push both
halves together until it will not go any futher.
RECESSTAB
Note: The two parts
can only be tted in
the correct orientation.
Do not force the parts
together.
2. To secure the two parts
together, slide the
lock nut to the hread
and screw tight. To
dismantle, proceed in
reverse order.
Note: The locking and unlocking directions
are indicated on the lock nut.
1. Loosen the cover bolt with
the supplied Multi-Tool.
Do not remove the chain
sprocket cover.
Tensioning the Chain
WARNING! THE CHAIN HAS SHARP EDGES, FOR YOUR
OWN SAFETY, PLEASE USE WORK GLOVES. NEVER
TOUCH THE CHAIN OR SERVICE THE UNIT WITH
BATTERY FITTED.
33
WARNING! IF YOU TRY TO ADJUST THE CHAIN TENSION
WHILTS THE COVER BOLT IS TIGHT, IT WILL RESULT IN
THE CHAIN NOT LOOSENING AND POSSIBLE DAMAGE TO
THE MECHANISM.
2. Adjust the chain tension by
turning the chain tension
screw with the supplied
Multi-Tool. Turning the
tension screw CLOCKWISE
increases the chain tension,
turning it COUNTER-
CLOCKWISE decreases the
chain tension.
3. For the correct chain tension,
rmly pull up on the chain at
the middle of the top of the
exposed guide bar. When
the chain is pulled up to its
highest point, the bottom tip
of the links should only just
stay in the track [middle of
the guide bar].
4. After the chain has been
accurately tensioned, Tighten
the cover bolt to lock the guide
bar in place.
5. Check the tension again after a few minutes of cutting and several times in
the rst hour because the chain will lengthen as it breaks in. Adjust as you
go. A loose chain causes rapid wear to both the chain and the guide bar and
could derail causing a major safety hazard.
Taking the time to make adjustments to the chain will result in improved
performance and prolonged chain life.
33

Specyfikacje produktu

Marka: Ozito
Kategoria: nożyce do żywopłotu
Model: PXPPK-2520

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXPPK-2520, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Ozito

Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024
Ozito

Ozito PXPHTS-1845 Instrukcja

4 Października 2024
Ozito

Ozito PXCHTS-018 Instrukcja

2 Października 2024
Ozito

Ozito PXPPK-2520 Instrukcja

26 Września 2024
Ozito

Ozito PXPHTK-2545 Instrukcja

26 Września 2024
Ozito

Ozito HTER-600U Instrukcja

16 Września 2024
Ozito

Ozito PXCHTS-018U Instrukcja

14 Września 2024
Ozito

Ozito PXCPHTS-018U Instrukcja

13 Września 2024
Ozito

Ozito PXCHTK-218U Instrukcja

12 Września 2024
Ozito

Ozito OHT-018 Instrukcja

11 Września 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Dolmar

Dolmar HT-5510 Instrukcja

13 Stycznia 2025
Fieldmann

Fieldmann FZN 1001-A Instrukcja

12 Stycznia 2025
Echo

Echo HC-1500 Instrukcja

7 Stycznia 2025
DeWalt

DeWalt DCHT821 Instrukcja

3 Stycznia 2025
Sun Joe

Sun Joe 24V-HT16-LTE Instrukcja

31 Grudnia 2025
Sun Joe

Sun Joe HJ15HTE Instrukcja

31 Grudnia 2025
Hurricane

Hurricane HHS 580 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 692 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLHT 551 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 664 Instrukcja

29 Grudnia 2024