Instrukcja obsługi Ozito PXPHTS-1845

Ozito nożyce do żywopłotu PXPHTS-1845

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXPHTS-1845 (8 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
CORDLESS POLE
HEDGE TRIMMER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Cutting Speed: 1,400 SPM
Cutting Capacity: Ø16mm max.
Cutting Length: 410mm max.
Blade Length: 450mm
Extension Pole: 830mm
Length Min/Max.: 2.07/2.90mm
Weight: 3.50kg
PXPHTS-1845
STANDARD EQUIPMENT
Trimmer Head
ozito.com.au
Extension Tube
WARRANTY
0323
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: bearings, blades,
blade cover.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria 3175, Australia.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
Blade Cover
Rear Handle Tube
Shoulder Strap
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
The pole hedge trimmer can be used either with or without the
extension tube.
Fitting the Tubes
WARNING! ENSURE THE MACHINE IS SWITCHED OFF
AND BATTERY IS DISCONNECTED BEFORE PERFORMING
ANY OF THE FOLLOWING TASKS.
ACCESSORIES
1
9
2
3
4
14
6
7
8
1. Blade
2. Trimmer Head
3. Pivoting Head Button
4. Lock Nut
5. Extension Tube
6. Top Handle
7. Shoulder Strap Retainer
8. Sure Grip Handle
9. Rear Handle Release x 2
10. Safety Switch
11. Battery Seating
12. On/Off Trigger
13. Blade Cover
14. Shoulder Strap
CORDLESS POLE HEDGE TRIMMER
WARNING! WHEN HANDLING THE BLADE ASSEMBLY,
WEAR NON-SLIP, HEAVY-DUTY PROTECTIVE GLOVES. DO
NOT PLACE YOUR HAND OR FINGERS BETWEEN BLADES
OR IN ANY POSITION WHERE THEY COULD GET PINCHED
OR CUT. NEVER TOUCH BLADES OR SERVICE THE UNIT
WITH THE BATTERY INSTALLED.
BATTERY & CHARGER
This tool is compatible with all battery and
chargers from the Ozito PXC Range.
• Assembly without Extension Tube
1. Make sure the motor head and the rear handle are in the correct
orientation. Push the tube of the motor head into the tube of the rear
handle, aligning the Tab with the Recess as you do so. Push both
halves together until it will not go any futher.
RECESSTAB
Note: The two parts
can only be tted in
the correct orientation.
Do not force the parts
together.
2. To secure the two parts
together, slide the
lock nut to the hread
and screw tight. To
dismantle, proceed in
reverse order.
Note: The locking and unlocking directions
are indicated on the lock nut.
4
10
11 12
13
5
7
2. PREPARATION
WARNING! NEVER START THE POLE HEDGE TRIMMER
WHILE THE BLADE COVER IS FITTED.
• Assembly with Extension Tube
1. Push the tube of the motor head into the extension tube, aligning the
Tab with the Recess of the extension tube as you do so. Push both
halves together until it will not go any futher.
RECESSTAB
Note: The two parts
can only be tted in
the correct orientation.
Do not force the parts
together.
2. To secure the two parts
together, slide the lock
nut to the extension tube
thread and screw tight.
3. Make sure the motor head and the rear handle are in the correct
orientation. Push the tube of the rear handle onto the tube of the
extension tube, aligning the Tab with the Recess as you do so. Push
both halves together until it will not go any futher.
4. To secure the two parts together, screw tight with the lock nut.
WARNING! DO NOT OPERATE THE POLE HEDGE
TRIMMER WITH MORE THAN ONE EXTENSION TUBE
FITTED, THIS IS EXTREMELY DANGEROUS.
Adjusting the Rear Handle
Press and hold the two rear handle releases, one each side and turn the
handle 90 to the left or 90 to the right. Release to lock in position.
Pivoting the Trimmer Head
The head can be tilted to 7 different angles for ease of cutting in
different conditions.
1. Grip the motor housing of
the trimmer, press and hold
the pivoting head button.
WARNING! DO NOT HOLD THE BLADE IN AN ATTEMPT
TO ADJUST THE BLADE ANGLE. DOING SO MAY RESULT
IN POSSIBLE PERSONAL INJURY.
2. Tilt the head to any of
the 7 preset angles,
then release the
button to lock the
head in the selected
position.
The blade cover protects
the blade when not in
use. Simply slide it off
the blade before use.
Once nished operating,
place the cover back
over the blade.
Blade Cover

Specyfikacje produktu

Marka: Ozito
Kategoria: nożyce do żywopłotu
Model: PXPHTS-1845

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXPHTS-1845, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Ozito

Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024
Ozito

Ozito PXPHTS-1845 Instrukcja

4 Października 2024
Ozito

Ozito PXCHTS-018 Instrukcja

2 Października 2024
Ozito

Ozito PXPPK-2520 Instrukcja

26 Września 2024
Ozito

Ozito PXPHTK-2545 Instrukcja

26 Września 2024
Ozito

Ozito HTER-600U Instrukcja

16 Września 2024
Ozito

Ozito PXCHTS-018U Instrukcja

14 Września 2024
Ozito

Ozito PXCPHTS-018U Instrukcja

13 Września 2024
Ozito

Ozito PXCHTK-218U Instrukcja

12 Września 2024
Ozito

Ozito OHT-018 Instrukcja

11 Września 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

PowerPlus

PowerPlus POW6128 Instrukcja

7 Grudnia 2024
Bavaria

Bavaria BPH 2652/1 Instrukcja

6 Grudnia 2024
PowerPlus

PowerPlus POW6110 Instrukcja

5 Grudnia 2024
Kibani

Kibani WPET1206 - XXL Instrukcja

15 Października 2024
Tanaka

Tanaka THT-2000SB Instrukcja

15 Października 2024
Black & Decker

Black & Decker BHT518 Instrukcja

14 Października 2024
MacAllister

MacAllister MHTP24EB Instrukcja

13 Października 2024
Husqvarna

Husqvarna 226HS99S Instrukcja

12 Października 2024
Husqvarna

Husqvarna 122HD60 Instrukcja

11 Października 2024
Florabest

Florabest FHT 600 B2 Instrukcja

11 Października 2024