Instrukcja obsługi Ozito PXMHBTK-458

Ozito nożyce do żywopłotu PXMHBTK-458

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXMHBTK-458 (28 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/28

CORDLESS

LAWN MOWER

ORIGINAL MANUAL

SPECIFICATIONS

Voltage: 18V x 2

Cutting Diameter: 330mm

Cutting Heights: 25-65mm (5 settings)

No Load Speed: 3,400/min

Grass Catcher: 30 litres

Weight: 11.85kg

PXCLMK-218

Cordless Lawn Mower

ozito.com.au

Safety Key

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST

RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE

WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING

YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER

SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.

The benets provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major failure and for

compensation for any other reasonably foreseeable loss or damage. You are also

entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the failure does not

amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer service helpline

above.

0221

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty. Warranty excludes consumable parts, for example: grass catcher,

wheels, blade, cord clips, bearings etc..

STANDARD EQUIPMENT

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other

than that specied on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

ONLINE MANUAL

Scan this QR Code with your mobile

device to take you to the online manual.

15. Safety Key

ACCESSORIES

1. Wheels

2. Battery Cover

3. Battery Cover Securing Latch

4. Height Adjustment Lever

5. Cord Clips

6. Grass Catcher Flap

7. Lower Handle

8. Upper Handle

9. Lock-off Button

10. Handle Securing Lever

11. Start/Stop Lever

12. Grass Catcher

13. Handle Fastening Screw

14. Lifting Handle

CORDLESS LAWN MOWER

KNOW YOUR PRODUCT

7 8

1. ASSEMBLY

SETUP & PREPARATION

1. Align the holes in the upper

handle and lower handle.

2. Secure the lower handle with a

washer and fastening screw.

1. Place the lower handle into the

mount.

3. Repeat this process on the other side for the second lower handle.

Fitting the Upper Handle

Fitting the Lower Handles

WARNING! ENSURE THE TOOL IS SWITCHED OFF

AND BATTERIES ARE DISCONNECTED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

3. Place a washer and the handle

securing lever onto the bolt.

4. Lock the handle securing lever to

secure in place.

5. Repeat this process for the opposite side.

Note: There are 2 holes on each

end of the upper handle,

select the appropriate hole

for the height of the user.

2. Place the handle securing lever

bolt through the holes from the

inside.

BATTERY & CHARGER

This tool is compatible with all battery and chargers from Ozito

Power X Change Range.

2. INSERT & REMOVING THE BATTERIES

1. Pull the securing latch forward

and open the battery cover.

1. Pull the securing latch forward

and open the battery cover.

3. Insert the safety key.

(If the mower is not going to be used

immediately, do not insert the safety

key.)

2. Press the battery release tab and

remove the batteries.

1. Lift up the catcher ap with one

hand and guide the catcher with

your other hand over the two

hooks on the mower housing.

3. To remove, raise the ap and lift

the catcher out.

2. Slide two batteries of the same

capacity and same charge state

into the mower aligning the ribs

so that they click into place.

4. Close the battery cover.

3. Close the battery cover.

2. Lower the grass catcher and

allow it to sit in place. Lower the

catcher ap.

Inserting the Batteries into the Mower

Removing the Batteries from the Mower

Fitting and Removing the Grass Catcher

WARNING! WHEN FITTING THE GRASS CATCHER

AFTER EMPTYING, ALWAYS ENSURE THERE IS NO

BUILD UP OF GRASS IN THE GRASS CHUTE.

WARNING! ONLY FIT AND REMOVE THE CATCHER

WHEN THE MOWER IS SWITCHED OFF AND THE

MOTOR HAS COME TO A STOP.

1. Locate cord on outside of handle. Push the supplied cord clip over the cord

and onto the lower handle to secure in place.

If the indicator ap is down while

operating then the grass catcher is full

and needs emptying.

Note: Care should be taken not to impinge cord when folding down the

handle.

Securing the Cord

Grass Catcher Indicator

Ensure the cord follows the handle smoothly from the switch to the body of

the mower.

The grass catcher is tted with an indicator ap at the rear of the catcher to

help identify when to empty.

Note: Always use 2 batteries of same capacity and same charge state with the mower.

Specyfikacje produktu

Marka:	Ozito
Kategoria:	nożyce do żywopłotu
Model:	PXMHBTK-458

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXMHBTK-458, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nożyce do żywopłotu Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024

Ozito PXPHTS-1845 Instrukcja

4 Października 2024

Ozito PXCHTS-018 Instrukcja

2 Października 2024

Ozito PXPPK-2520 Instrukcja

26 Września 2024

Ozito PXPHTK-2545 Instrukcja

26 Września 2024

Ozito HTER-600U Instrukcja

16 Września 2024

Ozito PXCHTS-018U Instrukcja

14 Września 2024

Ozito PXCPHTS-018U Instrukcja

13 Września 2024

Ozito PXCHTK-218U Instrukcja

12 Września 2024

Ozito OHT-018 Instrukcja

11 Września 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Dolmar HT-5510 Instrukcja

13 Stycznia 2025

Fieldmann FZN 1001-A Instrukcja

12 Stycznia 2025

Echo HC-1500 Instrukcja

7 Stycznia 2025

DeWalt DCHT821 Instrukcja

3 Stycznia 2025

Sun Joe 24V-HT16-LTE Instrukcja

31 Grudnia 2025

Sun Joe HJ15HTE Instrukcja

31 Grudnia 2025

Hurricane HHS 580 Instrukcja

29 Grudnia 2024

Gardenline GLH 692 Instrukcja

29 Grudnia 2024

Gardenline GLHT 551 Instrukcja

29 Grudnia 2024

Gardenline GLH 664 Instrukcja

29 Grudnia 2024