Instrukcja obsługi Ozito PXLMTK-4182

Ozito nieskategoryzowany PXLMTK-4182

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXLMTK-4182 (11 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
TELESCOPIC HANDLE
LAWN MOWER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V x 2
Cutting Diameter: 370mm
Cutting Heights: 25 - 75mm, 6 position
No Load Speed: 3,400/min
Grass Catcher: 45 litres
Noise Rating: 96dB
Weight: 14.7kg
PXLMTS-0182
Cordless Lawn Mower
ozito.com.au
Safety Key
Telescopic Handle
Grass Catcher & Handle
Quick-release Handle Set
STANDARD EQUIPMENT
WARRANTY
0622
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: wheels, blade,
cord clips, bearings etc.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
13. Safety Key
1. Wheels
2. Battery Cover
3. Height Adjustment Lever
4. Carry Handle
5. Telescopic Handle
6. Grass Catcher Flap
7. Start/Stop Lever
8. Lock-Off Button
9. Telescopic Handle Quick-release Lever
10. Grass Catcher
11. Handle Angle Quick-release Lever
12. Cutting Deck
CORDLESS LAWN MOWER
KNOW YOUR PRODUCT
1
9
2
10
3
11
4
12
5678
13
1. ASSEMBLY
SETUP & PREPARATION
1. Place the telescopic handle assembly over the teeth of the mower handle
brackets.
Fitting the Telescopic Handle
WARNING! ENSURE THE MOWER IS SWITCHED OFF
AND THE BATTERIES ARE DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
ACCESSORIES
2. While supporting the handle secure with washer and Handle Angle Quick-
release Lever on both sides, with three settings available for the angle.
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from the Ozito
Power X Change Range.
Note: If necessary, turn the quick-release lever back sufciently on the thread
so that the handle quick-release lever can then still be ipped upwards.
Grass Catcher Handle Assembly
1. The handle will click into
position when aligned and
tted correctly.
3. Ensure one of the three positions
available is selected to the Height
Adjustment Line OTHERWISE
THIS WILL PREVENT THE MOWER
FROM OPERATING. As you make
your selection, make sure that both
sides are set to the same position.
3
2
1
Height Adjustment Line
2. PREPARATION
1. Lift up the grass catcher ap
with one hand and guide the
catcher with your other hand
over the two hooks on the
mower housing.
3. To remove, raise the grass catcher ap and lift the grass catcher out.
2. Lower the grass catcher and
allow it to sit in place. Lower
the grass catcher ap.
Adjusting the Cutting Height
Fitting and Removing the Grass Catcher
WARNING! ONLY FIT AND REMOVE GRASS THE
CATCHER WHEN THE MOWER IS SWITCHED OFF AND
THE MOTOR HAS COME TO A STOP.
Note: The grass catcher ap is
held against the grass catcher by
a spring.
The cutting height can be set between 25mm - 75mm in 6 intervals and can
be read off the scale.
1. Pull lever outwards away from the
mower body.
2. Adjust until the required cutting height
is selected.
3. Release lever and check that it is
securely seated in the required cutting
height position.
WARNING! WHEN FITTING THE GRASS CATCHER AFTER
EMPTYING, ALWAYS ENSURE THERE IS NO BUILD UP OF
GRASS IN THE GRASS CHUTE.
Grass Catcher Indicator
The grass catcher is tted with an
indicator at the rear of the catcher to
help identify when to empty.
If the indicator drops down while
operating then the grass catcher is full
and needs emptying.
Adjusting the Telescopic Handle
Note: Ensure that both sides
are set to the same position.
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
BATTERIES ARE DISCONNECTED BEFORE PERFORMING
ANY OF THE FOLLOWING TASKS.
1. To adjust the height of the handle
ip up the two quick-release
levers.
2. Adjust the handle into the
desired height. To lock in place
ip the two quick-release levers
back into the closed position.
3. To adjust the angle of the handle
ip up the two handle angle
quick-release levers. Three
setting positions available for
the angle. Ensure one
of the three setting
positions available is
selected otherwise
the mower will not
operate.
4. To lock in place ip the two handle angle quick-release levers back into
the closed position.

Specyfikacje produktu

Marka: Ozito
Kategoria: nieskategoryzowany
Model: PXLMTK-4182

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXLMTK-4182, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Ozito

Ozito

Ozito PXMBC-004 Instrukcja

29 Maja 2024
Ozito

Ozito PXCPPS-018U Instrukcja

28 Maja 2024
Ozito

Ozito OAST-050 Instrukcja

26 Maja 2024
Ozito

Ozito PXHTK-400 Instrukcja

24 Maja 2024
Ozito

Ozito PXWBS-200U Instrukcja

21 Maja 2024
Ozito

Ozito ATAK-009 Instrukcja

21 Maja 2024
Ozito

Ozito UJC-860 Instrukcja

20 Maja 2024
Ozito

Ozito PXBCSS-184 Instrukcja

20 Maja 2024
Ozito

Ozito PXCBLK-218 Instrukcja

19 Maja 2024
Ozito

Ozito PXSMSK-800MS Instrukcja

13 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024