Instrukcja obsługi Ozito PXCSS-500

Ozito Maszyna do piłowania PXCSS-500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXCSS-500 (6 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
SPECIFICATIONS
Voltage: 18V
No Load Speed: 4,200/min
Blade Diameter: 150mm (6”)
Blade Bore: 10mm
Depth of Cut: 48mm @ 90°
32mm @ 45°
Weight: 2.4kg
CORDLESS
CIRCULAR SAW
INSTRUCTION MANUAL
ozito.com.au
STANDARD EQUIPMENT
Circular Saw
Hex Key
Rip Fence
PXCSS-500
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
0219
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts, for example: cutting blades.
KNOW YOUR PRODUCT
1. FITTING THE BATTERY & GUIDE
SETUP & PREPARATION
CORDLESS CIRCULAR SAW
1
10 11 12 14 1513
2 3 4 5 6 7 8 9
1 Battery Seating
2 Rear Handle
3 Dust Port
4 On/Off Trigger
5 Lock-Off Lever
6 Hex Key Holder
7 Front Handle
8 Bevel Locking Knob
9 Rip Fence Locking Knob
10 Depth Locking Lever
11 Blade Guard Lever
12 Lower Blade Guard
13 Blade
14 Upper Blade Guard
15 Cutting Guide Notch
Inserting & Removing the Battery
1 Slide the battery into the seating
at the back of the saw until it
clicks into place.
2 To remove, press and
hold the battery release
tab and then slide out.
a
b
The rip fence allows you to perform straight cuts with ease.
Attaching the Rip Fence
2 Once the desired
width is set, tighten
the locking knob to
secure in place.
1 Insert the rip fence through the
rip fence slots in the front of the
baseplate.
3 To remove, loosen the locking
knob and then slide the rip fence
out.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
For optimal performance, we recommend the use of a 3.0Ah battery or
higher to operate this Power X Change Circular Saw.
3. CONTROLS2. DEPTH & BEVEL ADJUSTMENT
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
THE BATTERY IS REMOVED BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
WARNING! AFTER USE, HOLD THE SAW AWAY FROM
YOUR BODY UNTIL THE BLADE STOPS COMPLETELY.
OPERATION
Depth Adjustment
Bevel Adjustment
3 Tighten depth
adjustment knob to
secure in place.
1 Loosen the depth adjustment
lever.
1 Loosen bevel adjustment knob.
3 Tighten the bevel adjustment
knob.
2 Hold the baseplate down with
one hand. Raise or lower the saw
to the desired depth.
2 Align baseplate to desired angle
on bevel scale.
Depth should be adjusted so that no more than one tooth is protruding
through the timber. This helps to minimise splintering.
Turning On and Off
2 Squeeze the on/off
trigger to start the
saw.
Note: Allow the saw to reach full speed before beginning a cut.
1 Press and hold the lock-off level
in either direction.
3 To stop the saw, release the on/
off trigger.
The cutting guide will give an approximate line of cut. For a straight cut, use
the 0° notch. For a 45° cut, use the 45° notch. For higher accuracy, use the rip
fence provided.
Cutting Guide Notch
0
o45o

Specyfikacje produktu

Marka: Ozito
Kategoria: Maszyna do piłowania
Model: PXCSS-500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXCSS-500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Ozito

Ozito

Ozito PXBCS-1830 Instrukcja

24 Grudnia 2024
Ozito

Ozito PXCCSK-4182 Instrukcja

8 Października 2024
Ozito

Ozito PXBPCK-1825 Instrukcja

8 Października 2024
Ozito

Ozito PXTCSK-2520 Instrukcja

8 Października 2024
Ozito

Ozito PXPRSS-018 Instrukcja

7 Października 2024
Ozito

Ozito PXBPCS-1815 Instrukcja

7 Października 2024
Ozito

Ozito JSW-6100U Instrukcja

22 Września 2024
Ozito

Ozito OCS-018 Instrukcja

20 Września 2024
Ozito

Ozito RSW-5200 Instrukcja

18 Września 2024
Ozito

Ozito JSW-4000U Instrukcja

18 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Husqvarna

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025
Güde

Güde GSS 400 Instrukcja

12 Stycznia 2025
Makita

Makita DUC306PG2 Instrukcja

12 Stycznia 2025
HiKOKI

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025
DEDRA

DEDRA DED7060 Instrukcja

11 Stycznia 2025
Einhell

Einhell KGS 190 Instrukcja

11 Stycznia 2025
Sun Joe

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025
Einhell

Einhell BT-MB 550 U Instrukcja

11 Stycznia 2025
Maruyama

Maruyama MCV51 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc JS505DC Instrukcja

9 Stycznia 2025