Instrukcja obsługi Ozito PXCSS-165

Ozito Maszyna do piłowania PXCSS-165

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXCSS-165 (8 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
STANDARD EQUIPMENT
PXCSS-165
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
No Load Speed: 4,200/min
Blade Diameter: 165mm (6.5”)
Blade Teeth: 24TCT
Blade Bore: 20mm
Depth of Cut: 54mm @ 90°
35mm @ 45°
Weight: 2.59kg
ozito.com.au
1121
Circular Saw
Rip Fence
Hex Key
165MM
CIRCULAR SAW
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Spindle Lock
2. Hex Key Storage
3. Worklight
4. Bevel Locking Lever
5. Dust Port
6. Rear Handle
7. Lock-Off Button
8. Blade
9. Front Handle
10. Rip Fence Locking Knob
11. Cutting Guide Notch
12. Upper Blade Guard
13. Lower Blade Guard
14. Blade Bolt
15. On/Off Trigger
16. Blade Guard Lever
17. Depth locking Lever
18. Battery Seating
This tool is compatible with all batteries & chargers from the Ozito PXC range.
For optimal performance, we recommend the use of a 3.0Ah battery or higher to
operate this PXC tool.
CORDLESS CIRCULAR SAW
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY & GUIDE
SETUP & PREPARATION
65 7 98 10
1
3
4
2
111214161718 15 13
Installing & Removing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
2. To remove the battery,
hold down the battery
release button and then
slide the battery out.
Attaching The Rip Fence
The rip fence allows you to perform straight cuts with ease.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
1. Insert the rip fence through the
rip fence slots in the front of the
baseplate.
2. Once the desired width is set,
tighten the locking knob to
secure in place.
3. To remove, loosen the locking
knob and then slide the
rip fence out.
a
b
2. FITTING A BLADE 3. CUTTING ADJUSTMENTS
Changing The Blade
This tool is for wood cutting only and is not recommended for use with
abrasive wheels or masonry/diamond cutting wheels. Only use Ø165mm
wood cutting blades.
1. Press and hold the spindle lock.
2. Use the hex key to rotate the
blade until the spindle lock
engages. Remove the blade bolt
and outer blade ange.
3. Retract the lower blade guard
fully.
4. Remove and replace the blade.
Ensure that the arrows on the
blade point in the same direction
as the arrow on the upper blade
guard.
5. Replace the outer blade ange and blade bolt.
WARNING! ONLY USE BLADES WITH THE CORRECT
SIZE AND SHAPE OF BORE HOLE. ONLY USE THE
FLANGE AND BOLT SUPPLIED WITH THE TOOL.
6. Hold down the spindle lock and tighten
the blade bolt with the hex key.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! INSPECT THE BLADES BEFORE EACH
USE. REPLACE IF DAMAGED.
WARNING! ALWAYS WEAR GLOVES WHEN
HANDLING THE BLADE AS IT IS VERY SHARP AND
CAN CUT YOU WHEN IT IS NOT MOVING.
Depth Adjustment
Depth should be adjusted so that no more than one tooth is protruding
through the timber. This helps to minimise splintering.
1. Loosen the depth adjustment
lever.
Note: Do not push the lever
behind the depth adjustment scale.
2. Hold the baseplate down with
one hand. Raise or lover the saw
to the desired depth.
3. Tighten the depth adjustment
lever to secure in place.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.

Specyfikacje produktu

Marka: Ozito
Kategoria: Maszyna do piłowania
Model: PXCSS-165

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXCSS-165, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Ozito

Ozito

Ozito PXBCS-1830 Instrukcja

24 Grudnia 2024
Ozito

Ozito PXCCSK-4182 Instrukcja

8 Października 2024
Ozito

Ozito PXBPCK-1825 Instrukcja

8 Października 2024
Ozito

Ozito PXTCSK-2520 Instrukcja

8 Października 2024
Ozito

Ozito PXPRSS-018 Instrukcja

7 Października 2024
Ozito

Ozito PXBPCS-1815 Instrukcja

7 Października 2024
Ozito

Ozito JSW-6100U Instrukcja

22 Września 2024
Ozito

Ozito OCS-018 Instrukcja

20 Września 2024
Ozito

Ozito RSW-5200 Instrukcja

18 Września 2024
Ozito

Ozito JSW-4000U Instrukcja

18 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Alpina

Alpina APR 26 Instrukcja

22 Marca 2025
Gamma

Gamma HCZ2-85 Instrukcja

11 Marca 2025
Baumr-AG

Baumr-AG SW1 Instrukcja

10 Marca 2025
Stiga

Stiga PR 100e Instrukcja

9 Marca 2025
Bosch

Bosch EasyChain 18V-15-7 Instrukcja

27 Lutego 2025
Worx

Worx Nitro WX501 Instrukcja

26 Lutego 2025
DeWalt

DeWalt DCS383 Instrukcja

12 Lutego 2025
EGO

EGO PSX2510 Instrukcja

6 Lutego 2025
Hilti

Hilti WSR 1400-PE Instrukcja

4 Lutego 2025
Husqvarna

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025