Instrukcja obsługi Ozito PXCPRS-018

Ozito nożyce do żywopłotu PXCPRS-018

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXCPRS-018 (6 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
PRS-012
WARRANTY
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 1016
SPECIFICATIONS
Input: 18V
Stroke Length: 20mm
No Load Speed: 1500-2700spm
Max. Cutting Diameter: 60mm (with clamping jaw)
80mm (w/o clamping jaw)
Weight: 1.2kg
WHAT’S IN THE BOX
Cordless Pruning Saw
Battery & Charger sold separately
CORDLESS
PRUNING SAW
INSTRUCTION MANUAL
ozito.com.au
PXCPRS-018
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty Warranty excludes consumable parts, for example: guide bar, chain
and included accessories.
1 x Saw Blade
ONLINE
MANUAL
Scan this QR Code with your mobile
device to take you to the online
manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. BATTERY & CHARGER (SOLD SEPARATELY)
1. Blade Holder
2. Locking Sleeve
3. Blade
4. Clamping Jaw
5. Clamp Lever
6. Protective Cover
7. Safety Switch
8. Variable Speed Trigger
9. Main Handle
10. Battery Seating
CORDLESS PRUNING SAW
1 2
3 4 9 105 6 7 8
BATTERY & CHARGER
(sold separately)
This tool is compatible with all battery and
chargers from the Ozito Power X Change Range.
CAUTION: THE CHARGER FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
1. Connect the charger into a mains power outlet.
4. The charger LED will illuminate
red signifying that the battery is
charging.
3. With the charger sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a rm connection.
2. The charger LED will ash green
showing power is being supplied
to the charger.
5. The charger LED will illuminate
green once the battery is fully
charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is fully charged
BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
3.
2. CUTTING BLADES
WARNING! ENSURE THE BATTERY IS DISCONNECTED
FROM THE TOOL BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
CAUTION! DO NOT HANDLE BLADES WITHOUT GLOVES
AS THEY ARE SHARP AND CAN BECOME HOT AFTER
USE, POTENTIALLY CAUSING PERSONAL INjURY.
3. Insert the cutting blade into the blade holder then release the blade holder
3. Remove the cutting blade from
the blade holder.
3.
2. Rotate and hold the blade
holder as shown.
2. Rotate and hold the blade
holder as shown.
4. Ensure the blade is
secure by pulling on the
blade.
The pruning saw can be tted with standard reciprocating saw blades, therefore can be
used to cut various timbers and plastics.
Fitting a Cutting Blade
Removing the Cutting Blade
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires
immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
1. Connect the charger into a mains power outlet.
4. The charger LED will illuminate red signifying that the battery is charging.
3. With the battery sitting on a at
surface, align the raised ribs on the
battery with the recess in the charger
and slide onto the battery ensuring a
rm connection.
2. The charger LED will ash green
showing power is being supplied
to the charger.
5. When removing the charger from the
battery, rst press the battery release
tab, then slide the charger from its
position.
Charging your lithium ion battery - Eco Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is fully charged
RED (Flashing) Battery or Charger fault
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ºC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.
1. Press both sides of the
protective cover and open
it.
5. Close the protective cover
1. Open the protective cover.
4. Close the protective cover

Specyfikacje produktu

Marka: Ozito
Kategoria: nożyce do żywopłotu
Model: PXCPRS-018

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXCPRS-018, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Ozito

Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024
Ozito

Ozito PXPHTS-1845 Instrukcja

4 Października 2024
Ozito

Ozito PXCHTS-018 Instrukcja

2 Października 2024
Ozito

Ozito PXPPK-2520 Instrukcja

26 Września 2024
Ozito

Ozito PXPHTK-2545 Instrukcja

26 Września 2024
Ozito

Ozito HTER-600U Instrukcja

16 Września 2024
Ozito

Ozito PXCHTS-018U Instrukcja

14 Września 2024
Ozito

Ozito PXCPHTS-018U Instrukcja

13 Września 2024
Ozito

Ozito PXCHTK-218U Instrukcja

12 Września 2024
Ozito

Ozito OHT-018 Instrukcja

11 Września 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Dolmar

Dolmar HT-5510 Instrukcja

13 Stycznia 2025
Fieldmann

Fieldmann FZN 1001-A Instrukcja

12 Stycznia 2025
Echo

Echo HC-1500 Instrukcja

7 Stycznia 2025
DeWalt

DeWalt DCHT821 Instrukcja

3 Stycznia 2025
Sun Joe

Sun Joe 24V-HT16-LTE Instrukcja

31 Grudnia 2025
Sun Joe

Sun Joe HJ15HTE Instrukcja

31 Grudnia 2025
Hurricane

Hurricane HHS 580 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 692 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLHT 551 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 664 Instrukcja

29 Grudnia 2024