Instrukcja obsługi Ozito PXCPHTS-018

Ozito nożyce do żywopłotu PXCPHTS-018

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXCPHTS-018 (8 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
SPECIFICATIONS
Input: 18V
Cutting Length: 400mm
Max. Cutting Capacity: 12mm
No Load Speed: 1,700/min
Length: 2.10 – 3.04m
Weight: 4.28kg
WHAT’S IN THE BOX
Pole
Battery & Charger
sold separately
CORDLESS POLE
HEDGE TRIMMER
INSTRUCTION MANUAL
ozito.com.au
Blade Cover
Hedge Trimmer Head
Rear Handle
Shoulder Strap
Auxiliary Handle
PXCPHTS-018
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
0416
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty Warranty excludes consumable parts, for example: blade and included
accessories.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. ASSEMBLY
1. Blade
2. Trimmer Head
3. Pivoting Trimmer Head Release
4. Telescopic Tube Lock
5. Main Tube
6. Auxiliary Handle
7. Shoulder Strap Holder
8. Assembly Nut
9. Pivoting Handle Release
10. Rear Handle
11. Switch Lock
12. Additional Handle Lever
13. Trigger Switch
14. Battery Seating
15. Mounting Attachment Lever
CORDLESS POLE HEDGE TRIMMER
1
3
4
5
6
BATTERY & CHARGER
(sold separately)
This tool is compatible with all battery and chargers from
the Ozito Power X Change Range.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
11
12
8
9
10
7
13 14 15
2
CAUTION: ENSURE THE TOOL IS OFF & THE BATTERY
REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Fitting Rear Handle
1. Push the rear handle fully
onto tube aligning the
internal prongs.
2. Screw tight with
the assembly nut.
Fitting Auxiliary Handle
1. Place the Auxiliary Handle onto
the mounting attachment.
2. Pass the bolt through the auxiliary handle and screw the lever to the end
of the bolt.
3. Select the most comfortable
position and close the lever
to lock the auxiliary handle in
position.
2. BATTERY & CHARGING (SOLD SEPARATELY)
CAUTION: THE CHARGER FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
1. Connect the charger into a mains power outlet.
4. The charger LED will illuminate
red signifying that the battery is
charging.
3. With the charger sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a rm connection.
2. The charger LED will ash green
showing power is being supplied
to the charger.
5. The charger LED will illuminate
green once the battery is fully
charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is fully charged
BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
Note: The Lock Button will “CLICK” back to the left (original position) when
the trimmer head is correctly secured in place.
CAUTION: THE BLADE HAS SHARP EDGES. FOR YOUR OWN
SAFETY, PLEASE WEAR WORK GLOVES.
Fitting Trimmer Head
1. Align the Trimmer head
and the motor head so the
arrows on both coincide.
2. (a) Press the trimmer head
against the motor head.
This will cause the lock
button to be pushed to the
right.
(b) Turn the trimmer head
clockwise. The trimmer
head will lock onto the
motor head and is then
secured in place.
Lock Button
a
b

Specyfikacje produktu

Marka: Ozito
Kategoria: nożyce do żywopłotu
Model: PXCPHTS-018

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXCPHTS-018, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Ozito

Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024
Ozito

Ozito PXPHTS-1845 Instrukcja

4 Października 2024
Ozito

Ozito PXCHTS-018 Instrukcja

2 Października 2024
Ozito

Ozito PXPPK-2520 Instrukcja

26 Września 2024
Ozito

Ozito PXPHTK-2545 Instrukcja

26 Września 2024
Ozito

Ozito HTER-600U Instrukcja

16 Września 2024
Ozito

Ozito PXCHTS-018U Instrukcja

14 Września 2024
Ozito

Ozito PXCPHTS-018U Instrukcja

13 Września 2024
Ozito

Ozito PXCHTK-218U Instrukcja

12 Września 2024
Ozito

Ozito OHT-018 Instrukcja

11 Września 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Dolmar

Dolmar HT-5510 Instrukcja

13 Stycznia 2025
Fieldmann

Fieldmann FZN 1001-A Instrukcja

12 Stycznia 2025
Echo

Echo HC-1500 Instrukcja

7 Stycznia 2025
DeWalt

DeWalt DCHT821 Instrukcja

3 Stycznia 2025
Sun Joe

Sun Joe 24V-HT16-LTE Instrukcja

31 Grudnia 2025
Sun Joe

Sun Joe HJ15HTE Instrukcja

31 Grudnia 2025
Hurricane

Hurricane HHS 580 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 692 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLHT 551 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 664 Instrukcja

29 Grudnia 2024