Instrukcja obsługi Ozito PXCPHTA-400

Ozito nożyce do żywopłotu PXCPHTA-400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXCPHTA-400 (8 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

CORDLESS POLE

HEDGE TRIMMER HEAD

INSTRUCTION MANUAL

SPECIFICATIONS

Voltage: 18V

Cutting Length: 400mm

Max. Cutting Capacity: 12mm

No Load Speed: 1,700/min

Weight: 1.57kg

PXCPHTA-400

WHAT’S IN THE BOX

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST

RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE

WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING

YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER

SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major failure and for

compensation for any other reasonably foreseeable loss or damage. You are also

entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the failure does not

amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer service helpline

above.

ozito.com.au

0617

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other

than that specied on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty. Warranty excludes consumable parts, for example blades, blade

cover.

Blade Cover

Hedge Trimmer Head

ONLINE MANUAL

Scan this QR Code with your mobile

device to take you to the online manual.

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

POLE HEDGE TRIMMER HEAD

1. Trimmer Head

2. Blade

1 2

CAUTION: ENSURE THE TOOL IS OFF & THE BATTERY

REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING

OPERATIONS.

Note: The Lock Button will “CLICK” back to the left (original position) when

the trimmer head is correctly secured in place.

CAUTION: THE BLADE HAS SHARP EDGES. FOR YOUR OWN

SAFETY, PLEASE WEAR WORK GLOVES.

Fitting Trimmer Head

1. Align the Trimmer head

and the motor head so the

arrows on both coincide.

2. (a) Press the trimmer head

against the motor head.

This will cause the lock

button to be pushed to the

right.

(b) Turn the trimmer head

clockwise. The trimmer

head will lock onto the

motor head and is then

secured in place.

Lock Button

Removing Trimmer Head

Motor Head

1. (a) Pull and hold the Lock

Button to the right.

(b) Turn the Trimmer

Head anti-clockwise so

the arrows on the Motor

Head and the Trimmer

Head coincide, allowing

the Trimmer Head to be

removed.

2. PREPARATION

Adjusting the Rear Handle

Adjusting the telescope length

1. To unlock the telescopic tube lock, twist it in a

clockwise direction while pointing the trimmer

blade away from the user.

2. Pull out the telescopic tubes to suit the required working height.

1. Press the two pivoting

handle releases, one

each side and adjust

the angle of the handle

up or down to any of 4

positions.

Note: The locking and unlocking

directions are indicated on

the locking collar.

3. To lock in the desired position, twist the telescopic tube lock in a counter-

clockwise direction.

Adjusting the Additional Handle

1. (a) Open the handle lever and

set the required (b) tilt of the

additional handle, close to lock

into position.

2. (a) Open the mounting bracket

lever and (b) slide the additional

handle into the required position,

close to lock into position.

2. Wear the shoulder strap

so that it lies over the left

shoulder.

1. Fasten to the shoulder strap

holder on the main tube.

Attaching the Shoulder Strap

Pivoting the Trimmer Head

1. Press the two pivoting

head releases, one each

side and adjust the angle

of the trimmer head

up or down to any of 7

positions.

Specyfikacje produktu

Marka:	Ozito
Kategoria:	nożyce do żywopłotu
Model:	PXCPHTA-400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXCPHTA-400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nożyce do żywopłotu Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024

Ozito PXPHTS-1845 Instrukcja

4 Października 2024

Ozito PXCHTS-018 Instrukcja

2 Października 2024

Ozito PXPPK-2520 Instrukcja

26 Września 2024

Ozito PXPHTK-2545 Instrukcja

26 Września 2024

Ozito HTER-600U Instrukcja

16 Września 2024

Ozito PXCHTS-018U Instrukcja

14 Września 2024

Ozito PXCPHTS-018U Instrukcja

13 Września 2024

Ozito PXCHTK-218U Instrukcja

12 Września 2024

Ozito OHT-018 Instrukcja

11 Września 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Dolmar HT-5510 Instrukcja

13 Stycznia 2025

Fieldmann FZN 1001-A Instrukcja

12 Stycznia 2025

Echo HC-1500 Instrukcja

7 Stycznia 2025

DeWalt DCHT821 Instrukcja

3 Stycznia 2025

Sun Joe 24V-HT16-LTE Instrukcja

31 Grudnia 2025

Sun Joe HJ15HTE Instrukcja

31 Grudnia 2025

Hurricane HHS 580 Instrukcja

29 Grudnia 2024

Gardenline GLH 692 Instrukcja

29 Grudnia 2024

Gardenline GLHT 551 Instrukcja

29 Grudnia 2024

Gardenline GLH 664 Instrukcja

29 Grudnia 2024