Instrukcja obsługi Ozito PXCBLVS-018

Ozito dmuchawa do liści PXCBLVS-018

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXCBLVS-018 (8 stron) w kategorii dmuchawa do liści. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
SPECIFICATIONS
Input: 18V x 2
No Load Speed: 8,000-13,000/min
Air Speed Max.: 210km/hr
Suction Power: 720m/hr
Mulching Ratio: 10:1
Collection Bag: 45 litres
Weight: 3.3kg
WHAT’S IN THE BOX
Motor Housing
Battery & Charger
sold separately
BRUSHLESS
BLOWER VAC
INSTRUCTION MANUAL
ozito.com.au
Tubes
Collection Bag & Shoulder Strap
Auxiliary Handle, Guide Wheels
& Wheel Support
Assembly Screws x 3
PXCBLVS-018
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
0416
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty Warranty excludes consumable parts, for example: blower tubes,
collection bag, shoulder strap and included accessories.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. ASSEMBLY
1. Guide Wheels
2. Lower Tubes
3. Upper Tubes
4. Auxiliary Handle
5. Shoulder Strap Hook
6. Variable Speed Dial
7. On/Off Trigger
8. Collection Bag
9. Mode Selector
10. Battery Seating
11. Main Handle
Brushless Blower Vac
1 2 3 4 5 6 7
8
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
ACCESSORIES
12. Shoulder Strap 13. Assembly Screws 1 x 16mm,
2 x 50mm long.
12
13
10 119
CAUTION: ENSURE THE TOOL IS OFF & THE BATTERY
REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Assembling the Tubes
1. Place the lower tube onto the
upper tube.
2. Secure the tubes together with
supplied 50mm long security
screw using a at tip screwdriver
(not included).
Note: Once installed the security screw cannot be removed.
3. Feed the top of the assembled
tubes into the motor housing. Push
together until they are connected
rmly.
4. Secure in place with the
remaining 50mm long security
screw.
STOP
5. Slide the wheel support over the
lower tube as far as the stop.
6. Secure with the supplied 16mm
long screw using cross tip
screwdriver (not included).
7. Place both wheels onto either side of the bracket, push to lock in place.
2. BATTERY & CHARGING (SOLD SEPARATELY)
CAUTION: THE CHARGER FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
1. Connect the charger into a mains power outlet.
4. The charger LED will illuminate
red signifying that the battery is
charging.
3. With the charger sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a rm connection.
2. The charger LED will ash green
showing power is being supplied
to the charger.
5. The charger LED will illuminate
green once the battery is charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted).
RED (Flashing) Battery is charging (low charge).
RED (Illuminated) Battery is charging (mid charge).
GREEN (Illuminated) Battery is charged.
BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
Attaching the Collection Bag
2. Attach the plastic connector on
the collection bag to the outlet
in the motor housing. Ensure the
tab clicks into the hole of the
connector.
1. Attach the clip on the collection
bag to the hook underneath the
upper tube.
3. Place the plastic connector on the
collection bag to the hook on the
motor housing.
Fitting the Shoulder Strap
1. Unscrew the knurled nut on the
shoulder strap hook and place
the strap through the gap.
2. Re-tighten the knurled nut on the
shoulder strap hook and adjust
the length as required.
Note: To use the shoulder strap simply slide the strap over your shoulder
so that some of the weight of the blower vac can be taken by your
shoulder.
Attaching the Auxiliary Handle
1. Place the handle over the motor
housing so it is positioned
correctly.
2. Insert the bolt and secure turning
clockwise. Do not overtighten.

Specyfikacje produktu

Marka: Ozito
Kategoria: dmuchawa do liści
Model: PXCBLVS-018

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXCBLVS-018, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje dmuchawa do liści Ozito

Ozito

Ozito PXBVS-018 Instrukcja

5 Stycznia 2025
Ozito

Ozito PXBVS-3624 Instrukcja

4 Października 2024
Ozito

Ozito PXJBGK-4020 Instrukcja

4 Października 2024
Ozito

Ozito OBL-0185 Instrukcja

4 Października 2024
Ozito

Ozito PXBUVK-4025 Instrukcja

3 Października 2024
Ozito

Ozito PXWBS-200 Instrukcja

28 Września 2024
Ozito

Ozito PXCBLK-218U Instrukcja

12 Września 2024
Ozito

Ozito PXCJBLS-018U Instrukcja

9 Września 2024
Ozito

Ozito BLV-2401U Instrukcja

9 Września 2024
Ozito

Ozito PXCBLVS-018U Instrukcja

8 Września 2024

Instrukcje dmuchawa do liści

Najnowsze instrukcje dla dmuchawa do liści

Makita

Makita UB001C Instrukcja

12 Stycznia 2025
RYOBI

RYOBI RY404012 Instrukcja

4 Stycznia 2025
RYOBI

RYOBI RY404015 Instrukcja

4 Stycznia 2025
Milwaukee

Milwaukee M18 Fuel 3017-21HD Instrukcja

3 Stycznia 2025
Gardenline

Gardenline GLLS 2501 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLLS 2506 Instrukcja

29 Grudnia 2024
EGO

EGO LB5301E Instrukcja

28 Grudnia 2024
EGO

EGO SNT2400E-K2753 Instrukcja

28 Grudnia 2024
Prowork

Prowork PG-EL 2450 E Instrukcja

26 Grudnia 2024
Prowork

Prowork PG-EL 2150 Instrukcja

26 Grudnia 2024