Instrukcja obsługi Ozito PXBUVK-4025

Ozito dmuchawa do liści PXBUVK-4025

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXBUVK-4025 (10 stron) w kategorii dmuchawa do liści. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/10

STANDARD EQUIPMENT

PXBUVS-1825

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 18V

No Load Speed: 4,500-15,000/min

Air Speed: 250km/h max.

Air Volume: 120m/h max.

Noise Rating: 94dB

Weight: 1.10kg

ozito.com.au

1123

Universal Blower

Blower Tube

CORDLESS

UNIVERSAL

BLOWER

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria 3175, Australia.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts.

Blower Tube Extension

Blower Nozzle

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

a b

Installing The Blower Tubes

1. Push the blower tube onto the blower motor housing as far as it will

go, aligning the groove (a) on the blower tube and the guide (b) on the

outlet of the universal blower as you do this.

2. Turn the blower tube to lock in

place.

1. Blower Tube Extension

2. Blower Tube

3. Speed Control

4. On/Off Trigger

5. Sure Grip Handle

6. Battery Seating

7. Integrated Wall Holder

8. Motor Housing

9. Scraper

10. Blower Nozzle

This tool is compatible with all batteries & chargers

from the Ozito PXC range.

CORDLESS UNIVERSAL BLOWER

BATTERY & CHARGER

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

1 2

34 5

WARNING! ENSURE THE BLOWER IS SWITCHED OFF

AND THE BATTERY IS REMOVED BEFORE PERFORMING

ANY OF THE FOLLOWING TASKS.

WARNING! DO NOT USE ANY ATTACHMENTS

OR ACCESSORIES NOT RECOMMENDED BY THE

MANUFACTURER OF THIS PRODUCT, AS IT CAN RESULT

IN SERIOUS PERSONAL INJURY.

WARNING! THE BLOWER TUBE TURNED AS FAR AS

IT WILL GO AND LOCK INTO PLACE TO ENSURE IT IS

FIRMLY SECURED IN POSITION.

3. Depending on your application the blower tube extension can be

attached to the end of the blower tube, to install follow the above

steps to correctly install the tubes together.

“CLICK”

PRESS

Inserting the Battery

Align the ribs of the battery

with the recess below the

handle of the blower and push

in until it clicks into place.

Removing the Battery

Press and hold the battery

release tab as you slide the

battery out.

2. INSERTING & REMOVING THE BATTERY

Run Time

The operating time of the PXC battery (the amount of operating time

and the area you can cover with a single battery charge) is largely

dependent on the battery age, speed selected and the rate of work.

Frequently turning the equipment on and off will also reduce the

runtime. If the operating time of the PXC battery (runtime) is still

unsatisfactory in spite of the above measures, you can remedy the

problem by using PXC battery with a larger capacity (Ah).

Installing The Blower Nozzle

Depending on your application the blower nozzle can be attached to the

blower motor housing. Follow steps 1-2 in Installing the Blower

Tubes to correctly install.

Note: To remove the tubes or nozzle proceed in reverse order.

Specyfikacje produktu

Marka:	Ozito
Kategoria:	dmuchawa do liści
Model:	PXBUVK-4025

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXBUVK-4025, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje dmuchawa do liści Ozito

Ozito PXBVS-018 Instrukcja

5 Stycznia 2025

Ozito PXBVS-3624 Instrukcja

4 Października 2024

Ozito PXJBGK-4020 Instrukcja

4 Października 2024

Ozito OBL-0185 Instrukcja

4 Października 2024

Ozito PXBUVK-4025 Instrukcja

3 Października 2024

Ozito PXWBS-200 Instrukcja

28 Września 2024

Ozito PXCBLK-218U Instrukcja

12 Września 2024

Ozito PXCJBLS-018U Instrukcja

9 Września 2024

Ozito BLV-2401U Instrukcja

9 Września 2024

Ozito PXCBLVS-018U Instrukcja

8 Września 2024

Instrukcje dmuchawa do liści

Najnowsze instrukcje dla dmuchawa do liści

RYOBI RY404012 Instrukcja

4 Stycznia 2025

RYOBI RY404015 Instrukcja

4 Stycznia 2025

Milwaukee M18 Fuel 3017-21HD Instrukcja

3 Stycznia 2025

Gardenline GLLS 2501 Instrukcja

29 Grudnia 2024

Gardenline GLLS 2506 Instrukcja

29 Grudnia 2024

EGO LB5301E Instrukcja

28 Grudnia 2024

EGO SNT2400E-K2753 Instrukcja

28 Grudnia 2024

Prowork PG-EL 2450 E Instrukcja

26 Grudnia 2024

Prowork PG-EL 2150 Instrukcja

26 Grudnia 2024

Anova E60BL Instrukcja

21 Grudnia 2024