Instrukcja obsługi Ozito PXBRSS-018

Ozito Maszyna do piłowania PXBRSS-018

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXBRSS-018 (6 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
STANDARD EQUIPMENT
MOT OR T ECHNOLOG Y
MOTOR TECH NOLOG Y
PXBRSS-018
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
No Load Speed: 0-2,500spm
Stroke Length: 28mm
Cutting Capacity: 200mm (Timber)
12mm (Metal)
20mm (Plastic)
Weight: 2.0kg
ozito.com.au
0622
Brushless Reciprocating Saw
150mm Timber Blade
RECIPROCATING
SAW
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
MOT OR TEC HNOLOG Y
Installing The Blade
1. Rotate and hold the blade holder
clockwise.
2. Insert the blade fully and then
release the blade holder.
3. Ensure the blade is secure by tugging gently on the blade.
4. To remove the blade, rotate and
hold the blade holder clockwise,
then pull out the blade.
Adjusting The Pivot Shoe
1. Push the shoe locking button in
from the right side of the tool to
unlock it.
2. Adjust the pivot shoe to the
desired position.
3. Push the shoe locking button on
the left side of the tool to secure
the pivot shoe in place.
1. Sure Grip Handle
2. Battery Seating
3. Shoe Locking Button
4. Blade Holder
5. Pivot Shoe
6. Timber Blade
7. Finger Guard
8. Handle Lock
9. Vibration Dampener
10. On/Off Trigger
11. Lock-Off Button
This tool is compatible with all batteries & chargers from the Ozito PXC range.
For optimal performance, we recommend the use of a 3.0Ah battery
or higher to operate this PXC Reciprocating Saw.
BRUSHLESS RECIPROCATING SAW
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. ADJUSTMENTS
SETUP & PREPARATION
a.
b.
11
9
10
8
73
4
5
6
2
1
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Adjusting The Handle
The handle can be rotated at 90° intervals for better grip during use.
1. Slide and hold the handle lock
button backwards.
2. Rotate the handle 90° left or
right.
3. The handle lock button will click
back into place.
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
2. To remove the battery pack, hold
down the battery release button
and then slide the battery out.
Switching The Tool On/Off
1. Push the lock-off button in
from either side of the tool and
squeeze the on/off trigger to
start the tool.
Note: The lock-off button can be released once the tool has started.
2. Release the on/off trigger to stop
the tool.
2. CONTROLS
OPERATION
a.
b.
MOT OR TEC HNOLO GY
a.
b.

Specyfikacje produktu

Marka: Ozito
Kategoria: Maszyna do piłowania
Model: PXBRSS-018

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXBRSS-018, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Ozito

Ozito

Ozito PXBCS-1830 Instrukcja

24 Grudnia 2024
Ozito

Ozito PXCCSK-4182 Instrukcja

8 Października 2024
Ozito

Ozito PXBPCK-1825 Instrukcja

8 Października 2024
Ozito

Ozito PXTCSK-2520 Instrukcja

8 Października 2024
Ozito

Ozito PXPRSS-018 Instrukcja

7 Października 2024
Ozito

Ozito PXBPCS-1815 Instrukcja

7 Października 2024
Ozito

Ozito JSW-6100U Instrukcja

22 Września 2024
Ozito

Ozito OCS-018 Instrukcja

20 Września 2024
Ozito

Ozito RSW-5200 Instrukcja

18 Września 2024
Ozito

Ozito JSW-4000U Instrukcja

18 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Alpina

Alpina APR 26 Instrukcja

22 Marca 2025
Gamma

Gamma HCZ2-85 Instrukcja

11 Marca 2025
Baumr-AG

Baumr-AG SW1 Instrukcja

10 Marca 2025
Stiga

Stiga PR 100e Instrukcja

9 Marca 2025
Bosch

Bosch EasyChain 18V-15-7 Instrukcja

27 Lutego 2025
Worx

Worx Nitro WX501 Instrukcja

26 Lutego 2025
DeWalt

DeWalt DCS383 Instrukcja

12 Lutego 2025
EGO

EGO PSX2510 Instrukcja

6 Lutego 2025
Hilti

Hilti WSR 1400-PE Instrukcja

4 Lutego 2025
Husqvarna

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025