Instrukcja obsługi Ozito PMT-004

Ozito nożyce do żywopłotu PMT-004

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PMT-004 (40 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/40
1
PMT-004
PETROL 4-IN-1
MULTI TOOL
51.7cc 2-Stroke
INSTRUCTION MANUAL
1120
ozito.com.au
2
RISK OF EXPLOSION OR FIRE
What can happen:
• Spilled petrol and its vapours can become ignited from cigarette sparks, electrical arcing, exhaust
gases and hot engine components such as the muffler.
• Heat will expand fuel in the tank which could result in a fire.
• Operating the tool in an explosive environment could result in a fire.
• Muffler exhaust heat can damage painted surfaces, melt any materials sensitive to heat (such as
siding plastic, rubber or vinyl) and damage live plants. Keep hot tool away from other objects.
• Improperly stored fuel could lead to accidental ignition. Fuel improperly secured could get into the
hands of children or other unqualified persons.
How to prevent it:
• Shut off engine and allow it to cool before adding fuel to the tank.
• Use care when filling the tank to avoid spilling fuel. Move tool away from fuelling area before
starting engine.
• Keep maximum fuel level 20mm below top of tank to allow for expansion.
• Operate and refuel in well ventilated areas free from obstructions.
• Store fuel in a approved container (AS/NZS 2906-1999) for petrol. Store in a secure location away
from the work area. Make sure the container is clearly marked “fuel”.
RISK TO BREATHING
What can happen:
• Breathing exhaust fumes can cause serious injury or death.
How to prevent it:
• Operate tool in a well ventilated area. Avoid enclosed areas.
• Never operate unit in a location occupied by other people or animals.
SAVE THESE INSTRUCTIONS
1) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b)
Do not operate petrol tools in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a petrol tool.
Distractions can cause you to lose control.
2) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a petrol tool. Do
not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools may result in serious personal injury.
b) Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left
attached to a rotating part of the petrol tool may result in personal injury.
d) Do not overreach. Keep proper footing and balance at all times. This enables better control of the
petrol tool in unexpected situations.
e) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
f) If devices are provided for the connection of dust extraction and collection facilities ensure that
these are connected and properly used. Use of these devices can reduce dust-related hazards.
3) Petrol tool use and care
a) Do not force the petrol tool. Use the correct petrol tool for your application. The correct petrol tool
will do the job better and safer at the rate for which it was designed.
SAFETY INSTRUCTIONS
3
b) Do not use the petrol tool if the switch does not turn it on and off. Any petrol tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Turn tool off completely before making any adjustments, changing accessories, or storing petrol
tools. Such preventive safety measures reduce the risk of starting the petrol tool accidentally. Hair
can be caught in moving parts.
d) Store idle petrol tools out of the reach of children and do not allow persons unfamiliar with the
petrol tool or these instructions to operate the petrol tool. Petrol tools are dangerous in the hands
of untrained users.
e) Maintain petrol tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the petrol tool’s operation. If damaged, have the petrol tool
repaired before use. Many accidents are caused by poorly maintained petrol tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the petrol tool, accessories and tool bits etc., In accordance with these instructions and in the
manner intended for the particular type of petrol tool, taking into account the working conditions
and the work to be performed. Use of the petrol tool for operations different from intended could
result in a hazardous situation.
h) This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
i) Children should be supervised to ensure that they do not play with the appliance.
j) Always hold the equipment firmly in both hands.
4) Service
a) Have your petrol tool serviced by a qualified repair personnel using only identical replacement
parts. This will ensure that the safety of the petrol tool is maintained.
SAFETY INSTRUCTIONS (cont.)

Specyfikacje produktu

Marka: Ozito
Kategoria: nożyce do żywopłotu
Model: PMT-004

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PMT-004, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Ozito

Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024
Ozito

Ozito PXPHTS-1845 Instrukcja

4 Października 2024
Ozito

Ozito PXCHTS-018 Instrukcja

2 Października 2024
Ozito

Ozito PXPPK-2520 Instrukcja

26 Września 2024
Ozito

Ozito PXPHTK-2545 Instrukcja

26 Września 2024
Ozito

Ozito HTER-600U Instrukcja

16 Września 2024
Ozito

Ozito PXCHTS-018U Instrukcja

14 Września 2024
Ozito

Ozito PXCPHTS-018U Instrukcja

13 Września 2024
Ozito

Ozito PXCHTK-218U Instrukcja

12 Września 2024
Ozito

Ozito OHT-018 Instrukcja

11 Września 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Dolmar

Dolmar HT-5510 Instrukcja

13 Stycznia 2025
Fieldmann

Fieldmann FZN 1001-A Instrukcja

12 Stycznia 2025
Echo

Echo HC-1500 Instrukcja

7 Stycznia 2025
DeWalt

DeWalt DCHT821 Instrukcja

3 Stycznia 2025
Sun Joe

Sun Joe 24V-HT16-LTE Instrukcja

31 Grudnia 2025
Sun Joe

Sun Joe HJ15HTE Instrukcja

31 Grudnia 2025
Hurricane

Hurricane HHS 580 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 692 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLHT 551 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 664 Instrukcja

29 Grudnia 2024