Instrukcja obsługi Ozito OCPS-036

Ozito nożyce do żywopłotu OCPS-036

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito OCPS-036 (6 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
CORDLESS
PRUNER
3.6V Lithium Ion
INSTRUCTION MANUAL
OCPS-036
STANDARD EQUIPMENT
Cordless Pruner
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au AC Charging Adaptor
1018
SPECIFICATIONS
Input: 3.6V
Battery: 1.5Ah Li-Ion
Max. Cutting Cap.: Ø12mm
Cutting System: Bypass
Charge Time: 3 Hours
Tool Weight: 0.6 kg
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: cutting blade
and included accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
Blade Cover
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. BATTERY & CHARGING
1. Cutting Blade
2. Fixed Blade
3. Blade Lock
4. LED Work Light
5. On/Off Trigger
6. Sure Grip Handle
7. Safety Switch
8. State of Charge Indicator
9. Charging Socket
CORDLESS PRUNER
10. Charger Plug
11. AC Charging Adaptor
12. Blade Cover
ACCESSORIES
1
2
3
4
9
10
5
6
7
8
Charging your Lithium Ion Battery
2. Plug the AC charging
adaptor into a power outlet
and switch on the mains
power.
1. Plug the charger plug into the
tools charging socket.
The pruner state of charge indicator will
illuminate red signifying that the battery is
charging. Charging will take up to 3 hours
depending on the level of charge left in the
battery.
The Cordless Pruner’s battery has been shipped in a low
charge condition, and requires charging prior to use. Allow
several cycles of charging and discharging (through use of
the pruner) for the battery to reach its optimum performance /
runtime.
11 12
WARNING! THE POWER SUPPLY FOR THIS CHARGER
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS). A RESIDUAL CURRENT
DEVICE REDUCES THE RISK OF ELECTRIC SHOCK.
Note: The charger plug will
only t the charging socket one
way, do not force it if it does
not t rst time.
Note: The AC charging
adaptor light will illuminate
when power is being supplied
to the charger.
Charging is complete when the state of
charge indicator illuminates green.
Note: During the charging procedure, the handle and the
housing of the tool will feel slightly warm to the touch. This is
normal.
Note: The battery will not develop a memory, it does not have
to be fully discharged before recharging.
3. Once the pruning is fully
charged, switch the mains
power supply off and remove
the charger plug from the
tool.
WARNING! THIS CHARGER DOES NOT AUTOMATICALLY
TURN OFF WHEN THE BATTERY IS FULLY CHARGED.
SWITCH OFF AND UNPLUG THE AC CHARGING ADAPTOR
AT THE MAINS WHEN CHARGING IS COMPLETE.
Note: Do not use the pruner during the charging procedure.
2. STARTING AND STOPPING 3. PRUNING TIPS
OPERATION
2. Depress the on/off trigger, the cutting blade will move down
and the two blades will close to cut.
8mm
• For best results always make
the cut above 8mm from the
bud. This allows the wound to
heal properly.
• When removing
unwanted growth
ensure you make
clean cuts that are
angled away from
the buds.
• Prune parallel to existing branches and leaf nodes to
encourage new growth.
• When removing the
entire stem, cut back
to the point where it
branched.
• Each plant is different, slow growing plants will require only
light pruning, fast growing plants will require more frequent
pruning to keep them healthy.
• Ensure you prune all parts of the plant at the same time as
this ensures that there is an even and consistent growth.
1. Press and hold the safety
switch.
Note: While depressed the
LED work light will illuminate.
3. Release the on/off trigger, the two blades will open.
• Remove the blade cover.
• Wear protective gloves and eye protection while working
with the pruner.
X
�
X
�
Before Starting the Pruner Pruning can be done all year round. It is advisable to prune
lightly when the shrub/plant is in full bloom or in its peak. Prune
more heavily when the plant is less active and dormant.
General Pruning
• Regular tip pruning of new growth should be carried out
when plants or shrubs are at a young age ideally seedlings
or rooted cutting stage.
• For higher results tip pruning is best after flowering and
during the season. If you prune too late in the season this
affects and reduces your bloom.
• Tip pruning increases your flowers and creates bushier
plants.
WARNING! NEVER TOUCH THE BLADE WHILE THE TOOL
IS IN OPERATION AND BE AWARE OF THE SHARP EDGES
EVEN WHEN THE PRUNER IS NOT IN USE.

Specyfikacje produktu

Marka: Ozito
Kategoria: nożyce do żywopłotu
Model: OCPS-036

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito OCPS-036, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Ozito

Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024
Ozito

Ozito PXPHTS-1845 Instrukcja

4 Października 2024
Ozito

Ozito PXCHTS-018 Instrukcja

2 Października 2024
Ozito

Ozito PXPPK-2520 Instrukcja

26 Września 2024
Ozito

Ozito PXPHTK-2545 Instrukcja

26 Września 2024
Ozito

Ozito HTER-600U Instrukcja

16 Września 2024
Ozito

Ozito PXCHTS-018U Instrukcja

14 Września 2024
Ozito

Ozito PXCPHTS-018U Instrukcja

13 Września 2024
Ozito

Ozito PXCHTK-218U Instrukcja

12 Września 2024
Ozito

Ozito OHT-018 Instrukcja

11 Września 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Dolmar

Dolmar HT-5510 Instrukcja

13 Stycznia 2025
Fieldmann

Fieldmann FZN 1001-A Instrukcja

12 Stycznia 2025
Echo

Echo HC-1500 Instrukcja

7 Stycznia 2025
DeWalt

DeWalt DCHT821 Instrukcja

3 Stycznia 2025
Sun Joe

Sun Joe 24V-HT16-LTE Instrukcja

31 Grudnia 2025
Sun Joe

Sun Joe HJ15HTE Instrukcja

31 Grudnia 2025
Hurricane

Hurricane HHS 580 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 692 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLHT 551 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 664 Instrukcja

29 Grudnia 2024