Instrukcja obsługi Ozito MPS-8000
Ozito
agregat malarski
MPS-8000
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito MPS-8000 (8 stron) w kategorii agregat malarski. Ta instrukcja była pomocna dla 27 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
1
MOBILE PAINT
SPRAY SYSTEM
1200W
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 220-240V ~ 50Hz
Power: 1200W
Max. Flow Rate: 1,100ml/min
Max Viscosity: 150 DIN-sec
Container Capacity: 900ml
Nozzle: ø1.0 / ø2.0 / ø2.5mm
Weight: 5.1kg
WHAT’S IN THE BOX
Spray Gun & Station
Cleaning Needle, Brush &
Needle Removal Tool
3 x Nozzles &
2 x Fluid Needles
Viscosity Cup & Air Hose
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
MPS-8000
0217
1 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 12 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: viscosity cup, cleaning needle, nozzle, paint pot.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than
that specified on the tool.
• If the tool shows signs of damage or defects caused by or
resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
1
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Spray Station
2 Paint Pot
3 Paint Pot Lid
4 Nozzle
5 Spray Width Lever
6 Hanging Hook
7 Air Cap
8 Air Inlet
9 Variable Spray Trigger
10 Spray Regulator Dial
11 On/Off Switch
12 Locking Lever
13 Air Hose
14 Hose Connector
15 Air Outlet
16 Wheels
17 Wheel Brake
PAINT SPRAY SYSTEM
KNOW YOUR PRODUCT
18 19 20 21 2522 23 24 26
15 16 17
3 4
6
5
7
8
9
10
11
12
13
14
21
1. ASSEMBLY
18 Viscosity Cup
19 Cleaning Needle
20 Cleaning Brush
21 1mm Nozzle (Grey)
22 2mm Nozzle (Red)
23 2.5mm Nozzle (Black, Fitted)
24 Blunt Fluid Needle (Fitted)
25 Pointed Fluid Needle
26 Fluid Needle Removal Tool
ACCESSORIES
SETUP & PREPARATION
WARNING! ENSURE THE TOOL IS DISCONNECTED FROM
THE POWER SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
Attaching the Wheels
Fitting the Air Hose
2 Repeattherststepforthe
remaining 3 wheels.
2 Align the unlock arrow on
the other end of the air
hose with the arrow on
the gun air inlet. Rotate
clockwise to secure in
place.
1 Push the tabs
on the wheel
into 1 of the
square openings
in the mobile
station.
1 Align the unlock
arrow on one
end of the air
hose with the
arrow on the
spray station air
outlet. Rotate
clockwise to
secure in place.
2. PREPARATION
1 Insert the paint head into the gun body at perpendicular
angles to each other.
Note: The spray gun should be already assembled from the
box.
Note: Ensure the locking lever is rotated out of the way to
avoid damaging the locking lever.
1 Press the handle lock
button to allow the handle
to move.
1 Pour some paint into a
mixing container using
alterandaddasmall
amount of thinners.
1 Submerge the viscosity
cupintothematerialtoll.
3 Time how long it takes to empty the cup. This is referred to
as DIN seconds.
It is vital to determine the viscosity of the coating material to
see if it is suitable to be used in the spray gun.
3 Rotate the locking lever
forward to secure the paint
head.
2 Rotate the paint head
clockwise into the correct
orientation.
2 Raise or lower the
transport handle until it
clicks into position.
2 Mix the paint and thinners
thoroughly.
2 Raise the cup out of the
material and start timing.
4 If the material is above 30, 60, 150 DIN-sec for the 1mm,
2mm and 2.5mm nozzle respectively, the material will need
to be thinned more and retested.
Inserting the Paint Head
Using the Extension Transport Handle
Thinning
Determining Viscosity
NOTE: FOR BEST RESULTS, SURFACE PREPARATION AND PAINT
THINNING ARE THE TWO MOST IMPORTANT AREAS. ENSURE
ALL SURFACES ARE FREE OF DUST, DIRT AND GREASE.
PAINT
THINNERS
PAINT
THINNERS
Thinning is particularly important when spraying. Most paints
are supplied ready for brush application and need to be diluted
sufcientlyforsprayingpurposes.
Note: Water based paints can be thinned using water.
Follow the manufacturers guide for thinning ratios which
should be labelled on the paint container.
IMPORTANT! THE SPRAY GUN CANNOT BE USED WITH
MATERIALS CONTAINING ABRASIVE SUBSTANCES, GLAZES,
DISPERSION PAINTS, CAUSTIC AND ALKALINE SUBSTANCES,
TEXTURED COATINGS OR TOXIC SPRAYS.
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | agregat malarski |
| Model: | MPS-8000 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito MPS-8000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje agregat malarski Ozito
6 Maja 2024
Instrukcje agregat malarski
Najnowsze instrukcje dla agregat malarski
8 Lipca 2024
21 Czerwca 2024
21 Czerwca 2024
21 Czerwca 2024
12 Czerwca 2024
23 Maja 2024
10 Maja 2024