Instrukcja obsługi Ozito ECS-355


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito ECS-355 (10 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
ELECTRIC
CHAINSAW
1800W
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 1800W
Bar Length: 355mm (14”)
Chain Speed: 13.5m/s
Bar Type: Oregon
Chain Pitch: 9.53mm (3/8”)
Sharpening File: 5/32”
Oil Feed: Automatic
Oil Tank Capacity: 125ml
Chain Oil: Standard Chain Bar Oil
Weight: 4.5kg
ECS-355
WHAT’S IN THE BOX
Electric Chainsaw
Spanner/Chain
Tension Adjuster
Guide Bar Cover
ozito.com.au
1
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
13Barsecuringnutcover(tted)
14Spanner/chaintension
adjustor
ACCESSORIES
13 14
3. Fit the chain over the
guide bar making sure
that the cutters are facing
in the direction of rotation.
4. Place the guide bar and
chaininpositionensuring
the chain is around
sprocketwheel(B).
Note: If required adjust chain
tension screw to move the
tension lug back to allow the
bartot
B
4.Tocheckthelubricatingsystem,switchonthechainsawandhold
itwiththeguidebarandchainabovesomelightcolouredpaper
suchasnewspaper.Asteadilyincreasingstaincausedbyoilspray
shows the lubricating system is working.
WARNING!: NEVER START WORK UNLESS THE
CHAIN AND BAR ARE LUBRICATED.
NOTE: THE CHAIN SHOULD BE ADJUSTED BEFORE
FIRST USE, AGAIN AFTER 2-3 MINUTES OPERATION
AND RECHECKED AND ADJUSTED IF NECESSARY
AFTER EACH FURTHER 30 MINUTES OF USE. TAKE
CARE NOT TO OVER TENSION THE CHAIN.
8.Tightenthebarsecuringnut. 9.Replacethebarsecuringnut
cover.
NOTE: CHAIN BAR OIL MAY LEAK IF THE TOOL IS
LEFT FOR LONG PERIODS. THIS IS NORMAL. IF THE
TOOL IS TO BE LEFT UNUSED FOR AN EXTENDED
TIME, DRAIN THE OIL FROM THE TOOL. REFILL
BEFORE USE.


Specyfikacje produktu

Marka: Ozito
Kategoria: Maszyna do piłowania
Model: ECS-355

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito ECS-355, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna do piłowania Ozito

Ozito

Ozito PXBCS-1830 Instrukcja

24 Grudnia 2024
Ozito

Ozito PXCCSK-4182 Instrukcja

8 Października 2024
Ozito

Ozito PXBPCK-1825 Instrukcja

8 Października 2024
Ozito

Ozito PXTCSK-2520 Instrukcja

8 Października 2024
Ozito

Ozito PXPRSS-018 Instrukcja

7 Października 2024
Ozito

Ozito PXBPCS-1815 Instrukcja

7 Października 2024
Ozito

Ozito JSW-6100U Instrukcja

22 Września 2024
Ozito

Ozito OCS-018 Instrukcja

20 Września 2024
Ozito

Ozito RSW-5200 Instrukcja

18 Września 2024
Ozito

Ozito JSW-4000U Instrukcja

18 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania