Instrukcja obsługi Ozito CPM-300C

Ozito kosiarka CPM-300C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito CPM-300C (6 stron) w kategorii kosiarka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
300MM CYLINDER PUSH MOWER
CYLINDER
PUSH MOWER
300MM
INSTRUCTION MANUAL
SPECIFICATIONS
Cutting Width: 300mm
Cutting Height: 16 - 38mm, 4 positions
Spindle: Ø125mm
Grass Catcher: 16 Litres
Weight: 6.35kg
CPM-300C
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: bearings and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
OZITO 25 Fox Drive, Dandenong South, VIC 3175, Australia.
ozito.com.au
Cylinder Mower
Upper Handle
0624
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Handle Uprights x 2
Grass Catcher
Lower Handle, Bolts & Nuts x 6
10mm
Bolt
Bolt
Tools Required
To assemble the mower handles you
will require a 10 mm spanner (not
included).
Fitting the Handle
1. First, select the upper handle and the two handle uprights. Insert the
two handle uprights into the upper handle.
2. Fasten the handle uprights and upper handle together using two
shorter bolts, through the square holes, and nuts as shown.
3. Place the handle uprights onto the lower handle and fasten together
using the four longer bolts, through the square holes, and nuts as
shown.
1. Upper Handle
2. Handle Upright x 2
3. Lower Handle
4. Wheels
5. Height Adjustment Knob x 2
6. Grass Catcher
7. Blade Adjustment x 2
8. Blades
9. Rear Roller
10. Blade Guard
11. Bolts & Nuts Short x 2
12. Bolts & Nuts Long x 4
CYLINDER PUSH MOWER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
2
3
4
5 6
7 8
12
11
9 10
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Fitting the Grass Catcher
1. Hook the grass catcher in place on the left and right side of the
roller.
2. Fit the strap over the lower handle and clip together, adjust so the
catcher sits flat when mowing.
4. Now the handle is fully assembled and ready to be attached to the
mower body.
To attach the handle to the mower body, locate the two metal lugs
found forward of the cutting bar adjustment lock nuts. Insert one
of the large holes in the
handle over the lug, then
repeat the same process
on the other side. It may
be necessary to squeeze
the two lower handle arms
together to allow room for
locating the second arm
over the remaining metal
lug.

Specyfikacje produktu

Marka: Ozito
Kategoria: kosiarka
Model: CPM-300C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito CPM-300C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kosiarka Ozito

Ozito

Ozito CPM-300C Instrukcja

10 Grudnia 2024
Ozito

Ozito PXBMK-4047SP Instrukcja

3 Października 2024
Ozito

Ozito ELM-1230 Instrukcja

16 Września 2024
Ozito

Ozito ESA-1231U Instrukcja

16 Września 2024
Ozito

Ozito PXCLMK-218U Instrukcja

14 Września 2024
Ozito

Ozito PXCLMK-1318EU Instrukcja

13 Września 2024
Ozito

Ozito PXCSDMK-418U Instrukcja

13 Września 2024
Ozito

Ozito PXCLMK-418U Instrukcja

13 Września 2024
Ozito

Ozito LMPC-301U Instrukcja

12 Września 2024
Ozito

Ozito ELM-1250U Instrukcja

11 Września 2024

Instrukcje kosiarka

Najnowsze instrukcje dla kosiarka

Powerblade

Powerblade V475 Instrukcja

10 Grudnia 2024
Powerblade

Powerblade 350CX Instrukcja

10 Grudnia 2024
Hecht

Hecht 5654 Instrukcja

9 Grudnia 2024
Stihl

Stihl RM 253 Instrukcja

8 Grudnia 2024
Baumr-AG

Baumr-AG 730EX Instrukcja

7 Grudnia 2024
Baumr-AG

Baumr-AG 790SXe Instrukcja

7 Grudnia 2024
Flymo

Flymo Chevron 34C Instrukcja

6 Grudnia 2024
Flymo

Flymo Turbo Compact 330 Instrukcja

6 Grudnia 2024
Flymo

Flymo Easimo 900W Instrukcja

6 Grudnia 2024
Flymo

Flymo Speedi-Mo Instrukcja

6 Grudnia 2024