Instrukcja obsługi Ozito BSW-2581


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito BSW-2581 (12 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
1
BAND SAW
250W 200mm (8”)
Setup & Adjustment Manual
BSW-2581
0717
1. Tensioning Knob
2. Upper Blade Pulley
3. Upper Door
4. ON/OFF Switch
5. Lower Door
6. Rip Fence
7. Rip Fence Locking Lever
8. Lower Blade Pulley
9. Upper Door Lock
10. Blade Guard Adjustment
11. Blade Guard
12. Upper Blade Guide
13. Saw Table
14. Stabiliser Bar
15. Lower Door Lock
16. Machine Base
BAND SAW
2
CONTENTS
KNOW YOUR PRODUCT
KNOW YOUR PRODU
Know your product .............................................................................................................. Page 2,3
Fitting the rubber feet & stabiliser bar.................................................................................. Page 4
Fitting the blade................................................................................................................... Page 4
Tensioning the blade for tracking......................................................................................... Page 5
Adjusting the blade (tracking).............................................................................................. Page 6
Tensioning the blade for use................................................................................................ Page 7
Setting blade guides............................................................................................................ Page 7
Mounting the saw table........................................................................................................ Page 9
0
I
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4
Rubber Feet
1. Insert one of the hex head bolts with a washer into 1 of 4 holes in
the base of the machine.
2. Align one of the rubber feet and nut with the bolt from underneath
the base and hand tighten.
3. Tighten the hex head bolt with a spanner to secure the rubber
foot.
4. Repeat this process to attach the remaining 3 rubber feet.
Stabilising Bar
1. Insert the rails of the stabilising bar into the 2 holes in the side of
the machine base.
2. Align the 2 holes in the stabilising bar with the holes in the
machine base.
3. Insert the 2 stabilizer bar bolts with washer through the aligned
holes and secure with the nuts.
4. Tighten to secure the stabilising bar.
SETUP & PREPARATION
IMPORTANT! ENSURE THE TOOL IS DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING OPERATIONS.
1. FITTING THE RUBBER FEET & STABILISER BAR
2. FITTING THE BLADE
Before adjusting the tension & tracking of the blade, please ensure the upper & lower guides
are well clear of the blade (following the steps below).
1. Loosen the door locking knobs and open both housing doors.
2. Remove the left blade guard by sliding it up and out. Also open
the right blade cover.
3. Loosen the tensioning knob at the top of the unit by rotating
anti-clockwise.
0
I


Specyfikacje produktu

Marka: Ozito
Kategoria: Maszyna do piłowania
Model: BSW-2581

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito BSW-2581, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna do piłowania Ozito

Ozito

Ozito PXBCS-1830 Instrukcja

24 Grudnia 2024
Ozito

Ozito PXCCSK-4182 Instrukcja

8 Października 2024
Ozito

Ozito PXBPCK-1825 Instrukcja

8 Października 2024
Ozito

Ozito PXTCSK-2520 Instrukcja

8 Października 2024
Ozito

Ozito PXPRSS-018 Instrukcja

7 Października 2024
Ozito

Ozito PXBPCS-1815 Instrukcja

7 Października 2024
Ozito

Ozito JSW-6100U Instrukcja

22 Września 2024
Ozito

Ozito OCS-018 Instrukcja

20 Września 2024
Ozito

Ozito RSW-5200 Instrukcja

18 Września 2024
Ozito

Ozito JSW-4000U Instrukcja

18 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania