Instrukcja obsługi Ozito ASG-DLX
Ozito
Farba w sprayu
ASG-DLX
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito ASG-DLX (8 stron) w kategorii Farba w sprayu. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
DELUXE
SPRAY GUN
160-240 ml/min
INSTRUCTION MANUAL
SPECIFICATIONS
Working Air Pressure: 50psi (3.5Bar)
Max Air Pressure: 87psi (6Bar)
Av. Air Consumption: 85-226L/min (3-8cfm)
Nozzle Size: ø1.8mm
Spray Width: 40-70mm
Flow Rate: 160-240ml/min
Feed Type: Suction
Paint Pot Size: 1000ml
Air Inlet: 1/4” BSP
Weight (tool only): 0.92kg
WHAT’S IN THE BOX
Spray Gun
ozito.com.au
ASG-DLX
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Nozzle
2 Nozzle Collar
3 Paint Pot
4 Suction Tube Locking Nut
5 Paint Pot Locking Lever
6 Variable Trigger
7 Air Regulator Valve
8 Air Inlet
9 Fluid Adjustment Dial
10 Fan Adjustment Dial
DELUX SPRAY GUN
KNOW YOUR PRODUCT
1 2 3 4 5 6
1. ASSEMBLY
SETUP & PREPARATION
1 Slide the paint pot over the
suction tube an align with
the head.
3 To remove, simply undo
the paint pot locking lever
and remove the pot.
1 Wrap the threaded male air
inlet of the spray gun with
teon tape in a clockwise
direction.
3 Pull back the sleeve on
hose tting, insert male
end & release sleeve on
hose tting.
2 Tighten the paint pot
locking lever.
2 Screw the female tting
clockwise onto the male
end of the air inlet.
Installing the Paint Pot
Attaching to Compressor
WARNING! ENSURE THE TOOL IS DISCONNECTED FROM
THE AIR SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
7 8 9 10
3. ADJUSTING THE SPRAY GUN
OPERATION
2. PREPARATION
1 Before pouring any paint
or thinners work out how
much of each substance is
needed.
3 Once the correct viscosity
is obtained, pour the
mixture into the paint pot.
Thinning is particularly important when spraying. Most paints
are supplied ready for brush application and need to be diluted
sufciently for spraying purposes.
Follow the manufacturers guide for thinning ratios which
should be labelled on the paint container.
2 Pour the required paint and
thinners through a lter into
a mixing cup and then mix
thoroughly.
Thinning
NOTE: FOR BEST RESULTS, SURFACE PREPARATION AND PAINT
THINNING ARE THE TWO MOST IMPORTANT AREAS. ENSURE
ALL SURFACES ARE FREE OF DUST, DIRT AND GREASE.
IMPORTANT! THE SPRAY GUN CANNOT BE USED WITH
MATERIALS CONTAINING ABRASIVE SUBSTANCES, GLAZES,
CAUSTIC AND ALKALINE SUBSTANCES.
1 Squeeze the variable
trigger to start spraying.
Note: The further the variable trigger is pressed, the more uid
will ow through the gun.
1 Fully tighten the uid
adjustment dial.
For vertical surfaces:
1 To change the spray
pattern, loosen the nozzle
collar and rotate the nozzle
to the desired position.
Tighten nozzle collar to
secure nozzle in place.
For horizontal surfaces:
The uid adjustment dial is a stop that limits the distance the
trigger can be pressed, thereby limiting the amount of paint
being sprayed.
2 Release the variable
trigger to stop spraying.
2 Slightly loosen the dial
then test setting on a
scrap piece of material.
Variable Trigger
Fluid Adjustment Dial
Choosing Spray Patterns
PAINT
THINNERS
PAINT
THINNERS
3 Repeat step 2 until desired uid output is reached.
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Farba w sprayu |
| Model: | ASG-DLX |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito ASG-DLX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Farba w sprayu Ozito
5 Lipca 2024
4 Lipca 2024
2 Lipca 2024
Instrukcje Farba w sprayu
- Farba w sprayu Parkside
- Farba w sprayu Black & Decker
- Farba w sprayu Wagner
- Farba w sprayu Ferm
- Farba w sprayu PowerPlus
- Farba w sprayu Vonroc
- Farba w sprayu Campbell Hausfeld
Najnowsze instrukcje dla Farba w sprayu
12 Października 2024
9 Sierpnia 2024
9 Sierpnia 2024
7 Sierpnia 2024
6 Sierpnia 2024
6 Sierpnia 2024
6 Lipca 2024
5 Lipca 2024
4 Lipca 2024
4 Lipca 2024