Instrukcja obsługi Ozito ASBG-PRO

Ozito nieskategoryzowany ASBG-PRO

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito ASBG-PRO (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
DESCRIPTION OF SYMBOLS SPARE PARTS
AIR SAND
BLASTING GUN
500ml
INSTRUCTION MANUAL
SPECIFICATIONS
ASBG-PRO
Container Capacity: 500ml
Max. Air Pressure: 90psi (6Bar)
Average Air Consumption: 170 l/min (6cfm)
Nozzle: ø5.5mm
Sand Thickness: 0.2-0.6mm
Weight: 0.4kg
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
Email: enquiries@ozito.com.au
WARNING!
Using an Extension Hose
Always use an approved extension hose suitable for the air input of this tool. Before use,
inspect the hose for signs of damage, wear and ageing. Replace the extension hose if
damaged or defective.
When using an hose on a reel, always unwind the lead completely.
It is recommended that the hose is a maximum of 25m in length.
NEVER under any circumstances aim the nozzle at another person or animal.
• In the event of an injury occurring, seek medical advice immediately.
• The sand blasting gun must not be used for spraying flammable paints and solvents with a
flash point of less than 21ºC.
GENERAL AIR TOOL SAFETY WARNINGS
AIR SAND BLASTING GUN SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings
refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
1. Work area safety
a. Cluttered or dark areas invite accidents. Keep work area clean and well lit.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c. Distractions can Keep children and bystanders away while operating a power tool.
cause you to lose control.
d. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
e. Check the maximum pressure rating of any tools or accessories that you intend using with
the compressor. The output pressure of the air from the compressor must be regulated so
that it never exceeds the rated pressure of the tool or accessory.
f. Always wear safety goggles or glasses when using the air compressor. Never point the
nozzle of an accessory towards any part of your body or towards another person.
g. Drain the moisture from the tank daily. It will help prevent corrosion.
h. Use safety equipment including safety goggles or shield, ear protection, breathing respirator
mask and protective clothing.
i. Air tools should not be used in a potentially explosive environment.
j. Use safety equipment including safety goggles or shield, ear protection, breathing or
respirator mask and protective clothing.
k. The tool must be used only for its prescribed purpose. Any use other than those mentioned
in this Manual will be considered a case of misuse. The user and not the manufacturer
shall be liable for any damage or injury resulting from such cases of misuse.
WARNING! In the event that an air line is cut or broken, the air supply must be turned off
at the compressor. A broken air line which is not supported is extremely dangerous and
can whip around very quickly, both with the capability of striking people, and blowing foreign
particles into the air.
Do not attempt to catch the air line but immediately keep bystanders well clear and turn off the air
supply to the hose, turn off the compressor at the On / Off button, and then remove the hose from
the compressor.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given the supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Warning Read instruction
manual
Wear eye protection
and breathing mask
Cubic feet per minute
Wear ear protection
Millilitres per minute
ml/min cfm
• Always ensure there is adequate ventilation when spraying.
• The use of ear protection is recommended.
• Eye protection is recommended to keep hazardous vapours and liquids out of eyes.
• Always wear a face mask when spraying.
• Always keep the spray nozzle in place during use. Never allow the spray to come in direct
contact with the skin.
• Never immerse the spray gun in liquid.
NEVER allow children to operate or play with the sand blasting gun.
• Before cleaning, always disconnect the appliance from the air supply.
• Always disconnect from air supply when refilling the media container.
• After every use ensure you clean your sand blasting gun thoroughly.
NEVER use the sand blasting gun outside when it is raining.
1 Sand Blasting Media (2 x 1kg)
2 Nozzle
3 On/Off Trigger
4 Media Container
5 Container Lid
6 Air Inlet
KNOW YOUR PRODUCT
TROUBLESHOOTINGMAINTENANCE
If the sand blasng gun fails to work effecvely, perform the
following checks:
• Check the air inlet is free of any dirt or blockages.
• Ensure the gun is lubricated properly.
• Check that the pressure on the air compressor is within its
||working range. If not, let the compressor rest to
||re-pressurise / refer to the compressor instruction manual.
Note: This tool is rated at 90psi. Ensure your compressor is set no higher than 90psi.
• If the enclosure of the gun requires cleaning, do not use
solvents but a moist soft cloth only. Never let any liquid get inside
the gun; never immerse any part of the gun into a liquid.
• Store the tool in a dry and safe place out of reach of children.
• Oil the sand blasting gun after each use.
CONNECTING TO COMPRESSOR
OPERATION
FILLING THE SAND BLASTING MEDIA CONTAINER
3. Screw the male nio fing
clockwise into the female end
of the air inlet.
4. Pull back the sleeve on hose
fing, insert male end & release
sleeve on hose fing.
1. Remove black plasc cap
from the air inlet.
2. Wrap the threaded male
end of an air fing with
thread seal tape in a clockwise
direcon.
2. Press the on/off trigger to start
blasng sand at the workpiece.
1. Ensure that the workpiece is secured
with clamps to avoid movement while
spraying.
2. Fill the media container with
suitable sand blasng media. Screw
the lid onto the container to secure.
1. Remove the container lid by
unscrewing in an an-clockwise
direcon.
3. To stop spraying release the
on/off trigger.
Note: Disconnect the tool from the air supply before fing or removing aachments.
Note: The sand blasng gun must
only be used with media which
does not contain silica.

Specyfikacje produktu

Marka: Ozito
Kategoria: nieskategoryzowany
Model: ASBG-PRO

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito ASBG-PRO, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Ozito

Ozito

Ozito PXMBC-004 Instrukcja

29 Maja 2024
Ozito

Ozito PXCPPS-018U Instrukcja

28 Maja 2024
Ozito

Ozito OAST-050 Instrukcja

26 Maja 2024
Ozito

Ozito PXHTK-400 Instrukcja

24 Maja 2024
Ozito

Ozito PXWBS-200U Instrukcja

21 Maja 2024
Ozito

Ozito ATAK-009 Instrukcja

21 Maja 2024
Ozito

Ozito UJC-860 Instrukcja

20 Maja 2024
Ozito

Ozito PXBCSS-184 Instrukcja

20 Maja 2024
Ozito

Ozito PXCBLK-218 Instrukcja

19 Maja 2024
Ozito

Ozito PXSMSK-800MS Instrukcja

13 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024