Instrukcja obsługi OttLite Creative Curves Clear Sun

OttLite Ulga Creative Curves Clear Sun

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla OttLite Creative Curves Clear Sun (1 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
Curve LED Desk Lamp with 4 Brightness Levels
CSA30G59 GX8274N
CONGRATULATIONS!
You’ve purchased the finest in natural lighting technology with
your new OttLite® product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product Regist ration Form and
return it today by mail, or register online by going to:
Ot tLite.com/warranty
NOTE: THIS UNIT IS FULLY ASSEMBLED
1. Remove lamp from packing placing lamp body base (A) flat
on a steady surface.
2. Connect the AC Adapt er input (E) into connect or (F) in the
rear-bottom of t he lamp.
3. Plug the A/C adapter (H) into a standard household 120V
AC outlet. Note: Only use with the supplied AC adapter
to avoid damage or fire.
4. Turn the lamp ON & OFF using power switch (B) located
in the front lower-side of base . Power switch (B) is a (A)
“touch” swit ch that controls the dimmer function for 4 levels
of brightness.
5. To power LED sett ings, slightly touch the switch to achieve
the following:
• turn lamp “ON” to 1st brightness setting; touch the
switch “once”;
• for 2nd brightness setting; touch the switch “two-times”;
• for 3rd brightness sett ing; touch the switch
“three-times”;
• for 4t h brightness setting; touch the switch “four-times”;
• to turn lamp “OFF”; touch the switch “five-times”.
6. To position the shade simply bend the flex-neck (G) as
needed to point the light. Please hold the lamp base (A)
while adjusting the lamp. Take care not to overextend the
lamp to avoid unbalancing it and damage.
SAFETY WARNING: TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
1. Turn lamp off and WAIT UNTIL LAMP HEAD (C) and
ADAPTER (H) ARE COOL before handling.
2. The LED panel (D) might get hot af ter several hours of
continuous use, DO NOT place your hands directly on
LED light panel.
3. Never use with an extension cord unless the plug can be
fully inserted into the receptacles in the extension cord.
4. Do not alter the plug.
5. The lamp head included with this unit cannot be replaced by
the consumer.
6. INDOOR USE ONLY.
NOTE: The important safety instructions appearing in this
instruction sheet are not meant to cover all possible conditions
and situations that may occur. It must be understood that
common sense, caution, and care must be used with any
electrical product.
CAUTION! IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF
THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY
THE MANUFACTURER OR ITS SERVICE AGENT OR A SIMILAR QUALIFIED
PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE ONLY.
CAUTION!
THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT
REPLACEABLE; WHEN THE LIGHT SOURCE REACHES ITS END OF LIFE THE
WHOLE LUMINAIRE SHALL BE REPLACED.
FCC PART 15
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not inst alled and used in accordance wit h the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase t he separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that of the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation
CAUTION! Any change or modification to product not
expressly recognized by OttLite Technologies voids OttLite’s
responsibility for proper function of product.
CAN ICES-005 (B)/NMB-005 (B)
AC/DC ADAPTER
Input: AC 100-240V, 50/60 Hz, 0.2A
Output: 12V DC, 0.42A with a Male DC Plug
ENGLISH Curve LED Desk Lamp with 4 Brightness Levels
INS190521 REV080719
G
D
E
F
H
A
B
C

Specyfikacje produktu

Marka: OttLite
Kategoria: Ulga
Model: Creative Curves Clear Sun

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z OttLite Creative Curves Clear Sun, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga OttLite

OttLite

OttLite 6D200C-SHPR Instrukcja

9 Października 2024
OttLite

OttLite Creative Curves Clear Sun Instrukcja

9 Października 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Goobay

Goobay 30780 Instrukcja

15 Października 2024
QTX

QTX DM-X12 Instrukcja

15 Października 2024
Livarno

Livarno IAN 94799 Instrukcja

15 Października 2024
Astro

Astro Denia Instrukcja

13 Października 2024
AFX

AFX Grace GRCP07CBBK Instrukcja

12 Października 2024
AFX

AFX Point PNTP0107L30D1BK Instrukcja

12 Października 2024
Neewer

Neewer TL97C Instrukcja

9 Października 2024
Neewer

Neewer SRP18C Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 005.824.56 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 705.829.38 Instrukcja

9 Października 2024