Instrukcja obsługi Oricom UHF395

Oricom radio UHF395

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oricom UHF395 (35 stron) w kategorii radio. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/35
Operating Instructions
UHF395
80 Channel UHF Citizen Band Radio
This unit complies with all relevant Australian
and New Zealand approval requirements
AS/NZS 4365:2011
Why has the ACMA increased the number of available UHF CB channels?
To provide additional channel capacity within the UHF CB Band, the ACMA will over the next 5 years change the
majority of the current wideband 40 channel use to narrowband 80 channel use.
During this time wideband channel use will be gradually phased out as users upgrade their existing radio’s.
This means that the new Oricom narrowband radio you have purchased will have more channels than older wideband
radios. Some of these channels are locked and cannot be used, (see the attached channel chart for more information).
When will this take place?
Early in 2011 new AS/NZS Standards came into effect allowing operators to use additional narrowband channels
and also use narrowband transmissions on some current wideband channels. This increased the number of
channels up to 80, 75 of which are useable voice channels.
What issues may users experience during the transition phase?
When a new narrowband radio receives a transmission from an older wideband radio the speech may sound loud
and distorted – simply adjust your radio volume for the best listening performance. When an older wideband radio
receives a signal from a new narrowband radio the speech may sound quieter - simply adjust your radio volume for
best listening performance. When operating a narrowband radio or Channel 41 - 80 interference is possible from
wideband radios transmitting on high power or on adjacent frequency.
The issues described above but a consequence of mixed use of wideband and are not a fault of the radio
narrowband radios.
It is expected that as older wideband radios are removed from service that this issue will be resolved. Most radios in
use will be narrowband eliminating this issue.
This information is current at time of printing. For further up to date information please visit
www.acma.gov.au
Table of contents
Need Help?
If you need assistance setting up or using your Oricom product now or in the future, call Oricom Support.
Australia 1300 889 785 or (02) 4574 8888
www.oricom.com.au
Mon-Fri 8am – 6pm AEST
New Zealand 0800 67 42 66
www.oricom.co.nz
Mon-Fri 10am – 8pm NZST


Specyfikacje produktu

Marka: Oricom
Kategoria: radio
Model: UHF395

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Oricom UHF395, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje radio Oricom

Oricom

Oricom UHF390R Instrukcja

10 Grudnia 2024
Oricom

Oricom UHF3954P Instrukcja

10 Grudnia 2024
Oricom

Oricom UHF395P Instrukcja

10 Grudnia 2024
Oricom

Oricom WRC001 Instrukcja

23 Września 2024
Oricom

Oricom JSP1200 Instrukcja

23 Września 2024
Oricom

Oricom ANU200 Instrukcja

21 Września 2024
Oricom

Oricom PMR1310 Instrukcja

17 Września 2024
Oricom

Oricom TPS10-6I Instrukcja

17 Września 2024
Oricom

Oricom ANC670 Instrukcja

16 Września 2024
Oricom

Oricom ANU100 Instrukcja

16 Września 2024

Instrukcje radio

Najnowsze instrukcje dla radio