Instrukcja obsługi Oricom MFMB01
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oricom MFMB01 (2 stron) w kategorii UKF. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
ORICOM CUSTOMER SUPPORT
Oricom have a trained and dedicated team of Customer Support
Representatives, each with the knowledge and resources to assist in
answering your questions quickly and efficiently.
Oricom Support - Australia
For all product enquiries, troubleshooting or to discuss the range of Oricom
products, feel free to contact Oricom or visit our website for answers to
frequently asked questions.
02 4574 8888
Monday - Friday 8am – 6pm AEST
Email: support@oricom.com.au
www.oricom.com.au
Oricom Support - New Zealand
0800 674 266
Monday - Friday 10am - 8pm NZST
Email: support@oricom.co.nz
MARINE RADIO CUTTING TEMPLATES
Scan the QR code below for the cutting template designed to suit each of
the Oricom MX1000 and MX1100G VHF marine radios.
USER GUIDE - ORICOM MFMB01 BRACKET
Installation of Flush Mount Bracket
1) Cut a hole into the location of where the radio is to be flush mount installed,
using the template downloadable on the supplied QR codes.
2) Slide the transceiver through the cutout, as the drawing shows below.
3) On the rear side with access to the back of the transceiver, affix the MFMB01
brackets to the left and right side of the transceiver with the supplied Philips
head screws, in the direction the image below shows.
4) Once secured to the transceiver, tighten the cap screws until firmly flush
mounted. Securely tighten with Hex key (not supplied).
5) Tighten locking nut to secure.
Images are for illustration purposes only.
MX1000 MX1100G
Note: Cap
screw should
be at the rear
of the radio.
This Express Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369, Unit 1, 4
Sovereign Place, South Windsor NSW 2756, herein after referred to as “Oricom”.
Oricom warrants that the product is free from defects in materials or workmanship during the Express
Warranty Period. This Express Warranty does not extend to any product from which the serial number
has been removed or was purchased outside of Australia.
The benefits of this Express Warranty are in addition to other rights and remedies you may have under
the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to
a major failure. In the event of a minor failure, Oricom reserves the right to choose to repair or replace
the product.
The Express Warranty Period will be a period of 12 Months beginning on the date of purchase of the
product evidenced by your dated sales receipt. You are required to provide proof of purchase as a
condition of receiving Express Warranty services.
You are entitled to a replacement product or repair of the product at our discretion according to the terms
and conditions of this document if your product is found to be faulty within the Express Warranty Period.
This Express Warranty extends to the original purchaser only and is not transferable.
Products distributed by Oricom are manufactured using new materials or new and used materials
equivalent to new in performance and reliability. Spare parts may be new or equivalent to new. Spare
parts are warranted to be free from defects in material or workmanship for thirty (30) days or for the
remainder of the Express Warranty Period of the Oricom branded product in which they are installed,
whichever is longer. During the Express Warranty Period, Oricom will where possible repair and if not
replace the faulty product or part thereof. All component parts removed under this Express Warranty
become the property of Oricom. In the unlikely event that your Oricom product has a recurring failure,
Oricom may always, subject to the Competition and Consumer Act 2010, at its discretion, elect to
provide you with a replacement product of its choosing that is at least equivalent to your product in
performance.
No change to the conditions of this Express Warranty is valid unless it is made in writing and signed by
an authorised representative of Oricom.
Oricom will not be liable under this Express Warranty, and to the extent permitted by law will not be liable
for any defect, loss, damage or injury arising out of or in connection with a:
1. Failure by you to adhere to the warnings and follow the instructions set out in this user guide for the
proper installation and use of the product;
2. Willful misconduct or deliberate misuse by you of the product;
3. Any external cause beyond our control, including but not limited to power failure, lightning or over
voltage; or
4. Modification to the product or services carried out on the product by anyone other than Oricom or
Oricom’s authorised service provider.
How to make a claim under your Express Warranty in Australia
Oricom has a simple warranty process for you to follow:
• Please call or email our Customer Support Team, 02 4574 8888 or support@oricom.com.au.
• A Customer Support Team member will verify after troubleshooting with you if your product
qualifies under warranty. If so, they will give you a Product Return Authorisation number.
• We will then email a Return Authorisation form and a Repair Notice (if necessary), together with
instructions on how to return the product for warranty service.
Please note that if a Customer Support Team member advises that your product does not qualify for
return, this warranty does not apply to your product. Products that are authorised to be returned to
Oricom in Australia must include all of the following:
• A completed Return Authorisation form
• A copy of your Proof of Purchase (please keep your original copy)
• The faulty product, including all accessories.
Send the approved returns to:
Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia
Please note that this Express Warranty excludes expenses incurred by you in returning any faulty
product to us. You must arrange and pay any expenses incurred (including postage, delivery, freight,
transportation or insurance of the product) to return the faulty product to us, however, we will arrange
delivery of the repaired or replaced faulty product to you.
Important Information
Repair Notice
Please be aware that the repair of your products may result in the loss of any user-generated data (such
as stored telephone numbers, text messages and contact information). Please ensure that you have
made a copy of any data saved on your product before sending for repair. Please also be aware that
products presented for repair may be replaced by refurbished products or parts of the same type rather
than being repaired.
Express Warranty (Australia)
Express Warranty (Australia)
Specyfikacje produktu
| Marka: | Oricom |
| Kategoria: | UKF |
| Model: | MFMB01 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Oricom MFMB01, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje UKF Oricom
17 Września 2024
Instrukcje UKF
- UKF Garmin
- UKF Dual
- UKF Scosche
- UKF Cobra
- UKF Clarion
- UKF Midland
- UKF American International
- UKF Rockford Fosgate
- UKF Wet Sounds
Najnowsze instrukcje dla UKF
29 Września 2024
25 Września 2024
21 Września 2024
20 Września 2024
14 Września 2024
9 Września 2024
1 Września 2024
20 Sierpnia 2024
17 Sierpnia 2024
6 Lipca 2024